| SIMOTION D445/D445-1, offen, ohne CompactFlash, Abb. ähnlich | | SIMOTION DRIVE-BASED CONTROL UNIT D445-1; PROGRAMMABLE MOTION CONTROLLER; HIGH PERFORMANCE; INTERFACES: 8 DI, 8 DI/DO, 6 DRIVE-CLIQ, 2 PROFIBUS, 2 ETHERNET, 2 USB, 1 OPTION SLOT; INCL. DUAL FAN / BATTERY MODULE AND BATTERY (REQUIRES >=V4.1 SP2 HF3/4) |
PLC- und Motion Control Performance | |
Number of axes / maximum | 64 |
Bus clock cycle / acc. to PROFIBUS / remark | 1 ms |
Send clock cycle / acc. to PROFINET / minimum | 0.5 ms |
Interpolator clock cycle / minimum | 0.5 ms |
Servo clock cycle / minimum | 0.5 ms |
Integrierte Antriebsregelung | |
Number of axes | |
- for servo control / maximum
| 6 |
- for U/f control / maximum
| 8 |
- for vector control / maximum
| 4 |
- for U/f control / maximum / remark
| (alternative) Drive control based on SINAMICS S120 CU320, firmware version V2.x |
Speicher | |
Memory capacity | |
| 96 Mbyte |
- on RAM / for Java applications
| 20 Mbyte |
| 47 Mbyte |
| 364 kbyte |
- of the user memory / as persistent memory
| 300 Mbyte |
Kommunikation | |
Number of interfaces | |
| 6 |
| 2 |
- according to Industrial Ethernet
| 2 |
| 2 |
| - Equidistant and isochronous - Can be configured as master or slave |
| 0 |
| Optionally over CBE30: - 1 interface with 4 ports - supports PROFINET IO with IRT and RT - can be configured as PROFINET IO controller and/or device |
Allgemeine technische Daten | |
Fan version | Double fan/battery module included in scope of delivery |
Supply voltage / for DC / rated value | 24 V |
Supply voltage | 20.4… 28.8 V |
own current drawn / typical | 1000 mA |
| without load at the inputs/outputs, without 24 V supply via DRIVE-CLiQ and PROFIBUS interface |
Inrush current / typical | 5 A |
Active power loss / typical | 24 W |
Ambient temperature | |
| -40… +70 °C |
| -40… +70 °C |
| 0 °C… 55 °C Maximum 5000 m (16405 ft) above sea level. Above an altitude of 2000 m (6562 ft), the max. ambient temperature decreases by 7 °C (44.6 °F) every 1000 m (3281 ft). |
Relative humidity / without condensation | |
| 5… 95 % |
Air pressure | 700… 1060 hPa |
Protection class IP | IP20 |
Height | 380 mm |
Width | 50 mm |
Depth | 270 mm |
| (when the spacer is removed 230 mm deep) |
Net weight | 3100 g |
Number of digital inputs | 8 |
Input voltage / at the digital input | |
| 24 V |
- initial value for signal<1>-recognition
| 15 V |
- final value for signal<1>-recognition
| 30 V |
- initial value for signal<0>-recognition
| -3 V |
- final value for signal<1>-recognition
| 5 V |
Electrical isolation / at the digital input | Yes |
- between the channels and the electronics power supply / remark
| (Yes, in groups of 6) |
Current drawn / at the digital input/output for digital input signals / for signal <1> | 10 mA |
Input delay time / at the digital input | |
- for signal <0> to <1> / typical
| 50 µs |
- for signal <1> to <0> / typical
| 150 µs |
Number of digital inputs/outputs | 8 |
Design of the electrical connection / of the inputs and outputs | parameterizable - as DI - as DO - as probe input (max. 6) - as cam output (max. 8 ) |
Bei Verwendung als Eingang | |
Input voltage / at the digital input/output for digital input signals | |
| 24 V |
- initial value for <1> signal detection
| 15 V |
- final value for <1> signal detection
| 30 V |
- initial value for <0> signal detection
| -3 V |
- final value for <0> signal detection
| 5 V |
Electrical isolation / at the digital input/output for the digital inputs signals / between the channels and electronics power supply | No |
Current drawn / at the digital input / for signal <1> / typical | 10 mA |
Input delay time | |
- at the digital input/output for digital input signals / for signal <0> to <1> / typical
| 5 µs |
Reproducibility of the edge detection / at the digital input/output for digital input signals as probe input | 5 µs |
|