| MOT. STARTER ECOFAST SRSSTE 4DI PROFIBUS DP ELECTR. SWITCHING ELECTR./THERM. UE PROTECTION 3-PH 400 V/1.1 KW 0.30 A...3.00 A WITHOUT BRAKE CONTACT 4DI 24 V DC HAN Q4/2 - HAN 1NC |
|
General details: |
Design of the product | | reversing starter |
Product function / bus-communication | | Yes |
Protocol / will be supported / PROFIBUS DP protocol | | Yes |
Protocol / will be supported / AS interface protocol | | No |
Product component / outlet for enine brake | | No |
Type of assignement | | 1 |
Item designation / according to DIN EN 61346-2 | | Q |
Item designation / according to DIN 40719 extendable after IEC 204-2 / according to IEC 750 | | A |
Width | mm | 130 |
Height | mm | 250 |
Depth | mm | 125 |
|
Control circuit: |
type of voltage | | DC |
Control supply voltage | | |
- for DC / rated value / minimum
| V | 20.4 |
- for DC / rated value / maximum
| V | 28.8 |
|
Main circuit: |
Type of the motor protection | | full motor protection |
Design of the switching contact | | solid-state |
Design of the short-circuit protection | | fuse |
Operating voltage / rated value | | |
| V | 400 |
| V | 500 |
Service power | | |
- at AC-3 / at 400 V / rated value
| W | 1,100 |
- for three-phase servomotors / at 400 V / at 50 Hz / for AC three-phase / minimum
| kW | 0.14 |
- for three-phase servomotors / at 400 V / at 50 Hz / for AC three-phase / maximum
| kW | 1.1 |
Adjustable response current / of the current-dependent overload release | | |
| A | 0.3 |
| A | 3 |
Breaking capacity limit short-circuit current (lcu) / at 400 V / rated value | kA | 100 |
|
Connection type: |
Design of the electrical connection / for main current circuit | | tab terminals |
|
Ambient conditions: |
Protection class IP | | IP65 |
Ambient temperature | | |
| °C | -20… +40 |
|
Certificates/approvals: | | |
|
| |
|
last change: | Feb 27, 2012 |