SIPLUS DP RS485 REPEATER -25 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7972-0AA02-0XA0 . FOR THE CONNECTION OF PROFIBUS/ MPI BUS SYSTEMS WITH MAX. 31 NODES; MAX. 12 MBIT/S, DEGREE OF PRO- TECTION IP20

Артикул: 6AG1972-0AA02-7XA0
Производитель: Siemens


Наименование продукта
SIPLUS DP RS485 REPEATER -25 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7972-0AA02-0XA0 . FOR THE CONNECTION OF PROFIBUS/ MPI BUS SYSTEMS WITH MAX. 31 NODES; MAX. 12 MBIT/S, DEGREE OF PRO- TECTION IP20
Жизненный цикл продукта
Разрешение на поставку Постепенное снятие продукта с производства Снятие продукта с производства Окончательное снятие продукта с производства
2011-04-21
    Версия от 2011-11-17
 
SIPLUS DP RS485 REPEATER -25 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7972-0AA02-0XA0 . FOR THE CONNECTION OF PROFIBUS/ MPI BUS SYSTEMS WITH MAX. 31 NODES; MAX. 12 MBIT/S, DEGREE OF PRO- TECTION IP20
Supply voltage
24 V DC Yes
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Input current
Current consumption, max. 100 mA; (100 mA without loads at PG/OP socket; 130 mA load at PG/OP socket (5 V/90 mA); 200 mA load at PG/OP socket (24 V/100 mA))
Interfaces
Bus cables 2 terminal blocks
PROFIBUS DP
Transmission rate, max. 12 Mbit/s; 9.6 kbit/s to 12 Mbit/s
Ambient conditions
Operating temperature
Min. -25 °C
max. 70 °C
Storage/transport temperature
Min. -40 °C
max. 70 °C
Extended ambient conditions
Relative to ambient temperature-atmospheric pressure-installation altitude Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
with condensation / maximum 100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)
Resistance
to biologically active substances / conformity with EN 60721-3-3 Yes; , Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
to chemically active substances / conformity with EN 60721-3-3 Yes; , Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation!
to mechanically active substances / conformity with EN 60721-3-3 Yes; , Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Degree and class of protection
IP20 Yes
Connection method
Power supply Terminal block
Dimensions
Width 45 mm
Height 128 mm
Depth 67 mm
Weight
Weight, approx. 350 g
Status Sep 10, 2011


Назад в раздел