A5E03

Артикул	Наименование	Производитель
A5E03480916	7ML13012AA223EC0,135CM, LIQUID PENETRANT MODEL: COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 135CM O-RINGS: NONE PROCESS CONNECTION: 3 600LB ASME RAISED FACE FLANGE C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 C18: MANUFACTURERS TEST REPORT (HYDROSTATIC TEST) D07: NACE Y15 TAG PROVIDED EXTRAS: LIQUID PENETRANT TEST CERTIFICATE	Siemens
A5E03483084	LR250 WITH 4300LB RF,NACE MR 0 175 PC MATERIAL: 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER SEAL: FKM PROCESS CONNECTION: 4 ASME, 300 LB, RAISED FACED COMMUNICATION: 4-20MA HART, START-UP AT <,3.6MA CABLE INLET: ALUMINUM, EPOXY PAINT, 2 X 1/2 NPT ANTENNA: 4 HORN (FITS 4 ASME OR DN 100 NOZZLES) APPROVALS: CSA/FM CLASS I, II AND III,DIV.1,GR.A-G,FCC,C-TICK PRESSURE RATING: 0.5 BAR (7.5 PSI G) MAXIMUM CERTIFICATE: FLANGE CONFORMS TO NACE MR 0 175, Y15	Siemens
A5E03488620	LR200 WITH 300MM SHIELDED ROD MLFB: 7ML54231MAX13CE0, X=300MM SS SHIELD ANTENNA MATERIAL- PTFE-USES ANTENNA ADAPTER AND ADDITIONAL PROCESS CONNECTION BELOW PROCESS CONNECTION- 2 NPT ((TAPER), ANSI/ASME B1.20.1) ANTENNA EXTENSIONS-300 MM 316L STAINLESS STEEL SHIELD PROCESS SEAL/GASKET-FKM O-RING ENCLOSURE/CABLE INLET- ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5 COMMUNICATION/OUTPUT 4-20MA HART, START-UP AT <,3.6MA APPROVAL CSA CLASS I AND II, DIV I, GROUPS A, B, C, D, G, 6.3 GHZ	Siemens
A5E03481975	HMI NET PANEL 46 SPARE PART, AUDIO MODULE NETPANEL	Siemens
A5E03937972	LIGHT SOURCE INCLUDING ADAPTER FOR SITRANS SL (SPARE PART FOR SENSOR ALIGNMENT KIT)	Siemens
A5E03489541	CAN-CONTROLLER PCI	Siemens
A5E03932516	SIPLUS READY CP 342-5 BASED ON 6GK7342-5DA03-0XE0 COMMUNICATION PROCESSOR CP342-5 FOR CONNECTING SIMATIC S7-300 TO PROFIBUS, DP, S5 COMPATIBLE, PG/OP AND S7 COMMUNICATION	Siemens
A5E03933099	7ML57312AX161CA0-Z, X=G 1 1/2 CLASS A,Y01=1500 MM: POWER SUPPLY: 19 TO 230 V AC, 19 TO 55 V DC, TWO RELAY OUTPUTS (DPDT).PROCESS TEMPERATURE: WITHOUT TEMPERATURE ISOLATOR PROCESS CONNECTION:1-1/2G CLASS A (EN ISO 228-1) EXTENSION LENGTH Y01=1500MM MATERIAL PROCESS CONNECTION/ EXTENSION STAINLESS STEEL 304 (1.4301).APPROVALS:CSA/FM GENERAL PURPOSE, C-TICK FURTHER DESIGNS: PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S). Y01=1500MM	Siemens
A5E03938154	7ML13031JD111EA0-Z,Y01=50CM SITRANS LG200 SINGLE ROD RIGID PROBES 2 TO 6 OF A METAL TANK WALL OR IN CAGE OR BRIDLE: SINGLE ROD RIGID PROBE MATERIAL OF CONSTRUCTION: PFA ROD INSULATION (316 SS ROD AND PROCESS CONNECTION) PROCESS CONNECTION(SIZE/TYPE): DN 50, PN 16, DIN 2527 FORM B FLANGE O-RING: VITON. PROBE INSERTION LENGTH:Y01=50CM FURTHER DESIGNS PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S). ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX. 610 CM	Siemens
A5E03934184	LR260 ENCLOSURE WITH BOARD STACK, HART COMMUNICATION, NPT CABLE INLET, APPROVAL OPTION D, NO PROCESS CONNECTION	Siemens
A5E03938155	MILLTRONICS MLC BELT SCALE: MLFB: 7MH71262XB1, WHERE X=60 SS ROLLER BELT WIDTH (A DIMENSION) 60 (1524 MM) LOAD CELL CAPACITY 20 LB (9.09 KG) WEIGHING IDLER DIMENSIONS 1.96 (50 MM) CALIBRATION WEIGHT 10.4LB (4.7KG) B DIMENSION: 62 (1574 MM) PER DRAWING SUPPLIED	Siemens
A5E03934187	LR260 ENCLOSURE WITH BOARD STACK, HART COMMUNICATION, NPT CABLE INLET, APPROVAL OPTION E, NO PROCESS CONNECTION	Siemens
A5E03939114	SPAREPART SITRANS FCT030 I/O CASSETTE QUOTE FNN OPTION FROM PRODUCT CODE	Siemens
A5E03939194	7ML5517-2CXX1-2AA1, XX=DN50 TRI CLAMP INVERSE FREQUENCY SHIFT CAPACITANCE LEVEL AND INTERFACE TRANSMITTER FOR EXTREME AND CRITICAL PROC 2001 TO 3000 MM (78.78 TO 118.11) 2) AND 4) DN50 SANNITARY FITTING CLAMP GENERAL PURPOSE 2 X M20 X 1.5 (IP68, ADAPTER) WITHOUT THERMAL ISOLATOR OR REMOTE ELECTRONICS 2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2 _3300 PF) Y01 = 2400MM Y02 = 125MM	Siemens
A5E03934191	LR260 ENCLOSURE WITH BOARD STACK, HART COMMUNICATION, M20 CABLE INLET, APPROVAL OPTION F, NO PROCESS CONNECTION	Siemens
A5E03490114	7ML55170AC241AA1,CRYOGENIC VERSION: Y01 = 600MM, 16MM PFA INSULATED ROD PROCESS CONNECTION: 2 ASME 300LB FLANGE, SINGLE PIECE FLANGE, RAISED FACE APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLSOURE/CABLE INLET: 2 X 1/2 NPT IP68 OPTIONS: NONE THERMAL ISOLATOR: PROVIDED WITH THERMAL ISOLATOR ELECTRICAL OUTPUT: 2-WIRE LOOP CURRENT 4 TO 20 MA (TRANSMITTER MSP2002-2_3300 PF) Y02: 50MM EXTRAS: CRYOGENIC TEST CERT. (TESTED IN LIQUID NITROGEN AT -196 C) PROVIDED	Siemens
A5E03937971	LIGHT SOURCE INCLUDING ADAPTER FO CD6 (SPARE PART FOR SENSOR ALIGNMENT KIT)	Siemens
A5E03496569	NAMUR ISOLATED SWITCH AMPLIFIER RELAY OUTPUT KFD2-SR2-EX1.W	Siemens
A5E03494175	7ML55150AD04XAA1,X=SS ENCL., Y01=300MM VERSION: Y01 = 300MM, ROD 16MM, PFA INSULATED PROCESS CONNECTION: 2 NPT (TAPER), ANSI/ASME B1.20.1 APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLOSURE: X = STAINLESS STEEL 2 X 1/2 NPT, IP68 OPTIONS: NONE THERMAL ISOLATOR: WITHOUT THERMAL ISOLATOR ELECTRONIC OUTPUT: 2-WIRE LOOP CURRENT 4 TO 20 MA (TRANSMITTER MSP2002-2 3300 PF) Y02: 50MM CERTIFICATES: C11 - C12 Y15 TAG	Siemens
A5E03490133	7ML56506JX100JB0,X=1325MM, C11,Y15 PROCESS CONNECTION: DN100 PN16,WELDED FLANGE, 316LSS, TYPE A FLAT FACED PROBE LENGTH: X = 1325MM, EXTENDED ROD LENGTH THERMAL ISOLATOR: WITH THERMAL ISOLATOR FOR PROCESS CONNECTION TEMP. OVER +85C WETTED SEALS: FKM PROBE MATERIAL: 316L SS WITH PFA LINING AND PEEK ISOLATORS APPROVALS: GP (CE, C-TICK) ENCLOSURE: ALUMINUM EPOXY COATED 2XM20X1.5 CABLE INLET, IP65 ACTIVE SHIELD LENGTH:105MM CERTIFICATES: C11 Y15 TAG:	Siemens
A5E03495359	7ML55171AC241AA1,CRYOGENIC VERSION: Y01 = 1100MM, 16MM PFA INSULATED ROD PROCESS CONNECTION: 2 ASME 300LB FLANGE, SINGLE PIECE FLANGE, RAISED FACE APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLSOURE/CABLE INLET: 2 X 1/2 NPT IP68 OPTIONS: NONE THERMAL ISOLATOR: PROVIDED WITH THERMAL ISOLATOR ELECTRICAL OUTPUT: 2-WIRE LOOP CURRENT 4 TO 20 MA (TRANSMITTER MSP2002-2 _3300 PF) Y02: 50MM CRYOGENIC TEST CERTIFICATE	Siemens
A5E03497926	LR200 FLANGED HORN VERSION, PFA COATED PROCESS CONNECTION ANTENNA MATERIAL - (USES ANTENNA ADAPTER) PFA COATED 316L STAINLESS STEEL WITH PTFE CONE EMITTER AND PURGE CONNECTION WITH 1/8 NPT INLET PROCESS CONNECTION DN 200 PN 16, TYPE A, FLAT FACED COMMUNICATION/OUTPUT 4-20MA HART, START-UP AT <,3.6MA PROCESS SEAL/GASKET FKM (-40 TO +200 C) ENCLOSURE/CABLE INLET ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5 HORN/WAVEGUIDE-200MM(8)HORN APPROVAL GP, CE PRESSURE-0.5BAR(7.25PSI) MAX	Siemens
A5E03498053	7ML5513XXL062BA1,XX=20M VERSION: XX = 20,000MM PFA INSULATED CABLE, WEIGHTED PROCESS CONNECTION: G 1.5 ((BSPP), EN ISO 228-1/PF (JIS-P), JIS B 0202) APPROVALS: FM CLASS I, DIV. 1, GROUPS A, B, C, D,T4 ENCLOSURE/CABLE INLET: 2 X M20 X 1.5 (IP68, ADAPTER) OPTIONS: WITH MOUNTING EYE (TO FIX THE CABLE SENSOR STRAIGHT) THERMAL ISOLATOR: WITHOUT THERMAL ISOLATOR OR REMOTE ELECTRONICS ELECTRONIC OUTPUT: 2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2_ 3300 PF)	Siemens
A5E03498071	7ML57345AF121FA0,WITH FORK PROTECT,2260MM POWER SUPPLY: 7 TO 9 V DC (REQUIRES NAMUR SWITCH AMPLIFIER) NAMUR IEC 60947-5-6. 2-WIRE PROCESS TEMPERATURE: UP TO +80 C (+176 F) PROCESS CONNECTION: FLANGED: 3 ASME 150 LBS B16.5 (1.4541/321) EXTENSION LENGTH: 2000MM APPLICATION TYPE: DRY BULK SOLIDS (125 HZ) APPROVALS: ATEX II 1G AND 1/2G EEX IA IIC, ATEX II 1D AND 1/2D, C-TICK EXTRAS: PROVIDED WITH FORK PROTECTION	Siemens
A5E03498070	7ML57345AF111FA0, WITH FORK PROTECT, 2000MM POWER SUPPLY: 7 TO 9 V DC (REQUIRES NAMUR SWITCH AMPLIFIER) NAMUR IEC 60947-5-6. 2-WIRE PROCESS TEMPERATURE: UP TO +80 C (+176 F) PROCESS CONNECTION: FLANGED: 3 ASME 150 LBS B16.5 (1.4541/321) EXTENSION LENGTH: 2000MM APPLICATION TYPE: DRY BULK SOLIDS (125 HZ) APPROVALS: ATEX II 1G AND 1/2G EEX IA IIC, ATEX II 1D AND 1/2D, C-TICK EXTRAS: PROVIDED WITH FORK PROTECTION	Siemens
A5E03498072	7ML57345AF121FA0,WITH FORK PROTECT,2520MM POWER SUPPLY: 7 TO 9 V DC (REQUIRES NAMUR SWITCH AMPLIFIER) NAMUR IEC 60947-5-6. 2-WIRE PROCESS TEMPERATURE: UP TO +80 C (+176 F) PROCESS CONNECTION: FLANGED: 3 ASME 150 LBS B16.5 (1.4541/321) EXTENSION LENGTH: 2000MM APPLICATION TYPE: DRY BULK SOLIDS (125 HZ) APPROVALS: ATEX II 1G AND 1/2G EEX IA IIC, ATEX II 1D AND 1/2D, C-TICK EXTRAS: PROVIDED WITH FORK PROTECTION	Siemens
A5E03495456	705-530A-A11, ECLIPSE TRANSMITTER. HOUSING: ALUMINUM, (2) M20 X 1.5 CONDUIT CONNECTIONS GP/IS (ATEX II EEX IA IIC T4) POWER SUPPLY: 9-32 VDC (17 MA MAXIMUM CURRENT DRAW) OUTPUT SIGNAL: PROFIBUS PA TRANSMITTER MOUNTING:INTEGRAL	Siemens
A5E03495457	7MR-A110-089 - GUIDED WAVE RADAR RIGID OVERFILL SERVICE PROBE	Siemens
A5E03495458	X7MR-A220-082 - GUIDED WAVE RADAR RIGID OVERFILL SERVICE PROBE. X = 2 G BSPP	Siemens
A5E03499382	SIMATIC IPC, SPAREPART BACK LIGHT CONTROLLER 21,5 LG X 1 FOR SIMATIC IPC477D	Siemens