| Артикул |
Наименование |
Производитель |
|
A5E03007571
|
FUE080 SPAREPART TRANSMITTER FOR AQUAMETRO FUE380 SYSTEMS WITH CUSTODY TRANSFER APPROVAL (7ME341). TYPE SITRANS FUE080 IP67 POLYAMIDE, SUPPLY: 115-230V AC. (THE ORIGINAL SYSTEM NUMBER AND SYSTEM SERIAL NUMBER MUST BE SPECIFIED ON ORDER. NOTE: A CUSTODY TRANSFER VERIFICATION IS NOT POSSIBLE).
|
Siemens
|
|
A5E03007597
|
FUE080 SPAREPART TRANSMITTER FOR AQUAMETRO FUE380 SYSTEMS WITH CUSTODY TRANSFER APPROVAL (7ME341). TYPE SITRANS FUE080 IP67 POLYAMIDE, SUPPLY: 115-230V AC, 3.6V BU. (THE ORIGINAL SYSTEM NUMBER AND SYSTEM SERIAL NUMBER MUST BE SPECIFIED ON ORDER. NOTE: A CUSTODY TRANSFER VERIFICATION IS NOT POSSIBLE).
|
Siemens
|
|
A5E03007576
|
FUE080 SPAREPART TRANSMITTER FOR AQUAMETRO FUE380 SYSTEMS WITH CUSTODY TRANSFER APPROVAL (7ME341). TYPE SITRANS FUE080 IP67 POLYAMIDE, SUPPLY: 3.6V BATTERY. (THE ORIGINAL SYSTEM NUMBER AND SYSTEM SERIAL NUMBER MUST BE SPECIFIED ON ORDER. NOTE: A CUSTODY TRANSFER VERIFICATION IS NOT POSSIBLE).
|
Siemens
|
|
A5E03007600
|
FUE080 SPAREPART TRANSMITTER FOR HYDROMETER FUE380 SYSTEMS WITH CUSTODY TRANSFER APPROVAL (7ME341). TYPE SITRANS FUE080 IP67 POLYAMIDE, SUPPLY: 115-230V AC. (THE ORIGINAL SYSTEM NUMBER AND SYSTEM SERIAL NUMBER MUST BE SPECIFIED ON ORDER. NOTE: A CUSTODY TRANSFER VERIFICATION IS NOT POSSIBLE).
|
Siemens
|
|
A5E03007599
|
FUE080 SPAREPART TRANSMITTER FOR AQUAMETRO FUE380 SYSTEMS WITH CUSTODY TRANSFER APPROVAL (7ME341). TYPE SITRANS FUE080 IP67 POLYAMIDE, SUPPLY: 3.6V, NO BATTERY. (THE ORIGINAL SYSTEM NUMBER AND SYSTEM SERIAL NUMBER MUST BE SPECIFIED ON ORDER. NOTE: A CUSTODY TRANSFER VERIFICATION IS NOT POSSIBLE).
|
Siemens
|
|
A5E03007601
|
FUE080 SPAREPART TRANSMITTER FOR HYDROMETER FUE380 SYSTEMS WITH CUSTODY TRANSFER APPROVAL (7ME341). TYPE SITRANS FUE080 IP67 POLYAMIDE, SUPPLY: 3.6V BATTERY. (THE ORIGINAL SYSTEM NUMBER AND SYSTEM SERIAL NUMBER MUST BE SPECIFIED ON ORDER. NOTE: A CUSTODY TRANSFER VERIFICATION IS NOT POSSIBLE).
|
Siemens
|
|
A5E03007603
|
FUE080 SPAREPART TRANSMITTER FOR HYDROMETER FUE380 SYSTEMS WITH CUSTODY TRANSFER APPROVAL (7ME341). TYPE SITRANS FUE080 IP67 POLYAMIDE, SUPPLY: 3.6V, NO BATTERY. (THE ORIGINAL SYSTEM NUMBER AND SYSTEM SERIAL NUMBER MUST BE SPECIFIED ON ORDER. NOTE: A CUSTODY TRANSFER VERIFICATION IS NOT POSSIBLE).
|
Siemens
|
|
A5E03007602
|
FUE080 SPAREPART TRANSMITTER FOR HYDROMETER FUE380 SYSTEMS WITH CUSTODY TRANSFER APPROVAL (7ME341). TYPE SITRANS FUE080 IP67 POLYAMIDE, SUPPLY: 115-230V AC, 3.6V BU. (THE ORIGINAL SYSTEM NUMBER AND SYSTEM SERIAL NUMBER MUST BE SPECIFIED ON ORDER. NOTE: A CUSTODY TRANSFER VERIFICATION IS NOT POSSIBLE).
|
Siemens
|
|
A5E03006748
|
7ML55153CC121AA1-Z,REFERENCE ROD. VERSION: ROD 24 MM, PFA INSULATED,Y01-4000MM,Y02-905MM PROCESS CONNECTION WELDED: FLANGE,RAISED FACE,2,ASME, 150IB. APPROVALS: CSA/FM CLASS 1,DIV. 2, GROUPS A, B, C, D T4, ATEX II 3G 2D EEXN A (IB) IIC T6 TO T4 T100 C, CSA/FM CLASS II AND III, DIV. 1, GROUPS E,F,G ENCLOURE: ALUMINUM EPOXY COATED,2 X 1/2 NPT IP68 THERMAL ISOLATOR: NONE ELECTRONIC OUTPUT 2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2 _ 3300 PF) SPECIAL REQUIREMENT REFERENCE
|
Siemens
|
|
A5E03007708
|
KIT, 1000FT SPOOL (12113) BELDEN CABLE
|
Siemens
|
|
A5E03005599
|
SITRANS F M MAG 3100 OP INSTR EN
|
Siemens
|
|
A5E03008182
|
SINAMICS G120 REPAIR PART WLX_311721 FRONT COVER FSC 575X200X100
|
Siemens
|
|
A5E03008175
|
SINAMICS G120 REPAIR PART WLX_311719 FRONT COVER FSA 410X125X100
|
Siemens
|
|
A5E03008178
|
SINAMICS G120 REPAIR PART WLX_311720 FRONT COVER FSB 510X145X100
|
Siemens
|
|
A5E03569747
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK, M20 CABLE INLET, APPROVAL OPTION A, WITH HART COMMUNICATION START-UP AT <, 3.6MA, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03569837
|
M900 - 7MH7116-3AA2
|
Siemens
|
|
A5E03016392
|
SIMATIC IPC, SPARE PART, REPEAR SET CABLE 1X USB CABLE ,1X SATA-ODD CABLE 1X FRONTFAN ADAPTER , 1X FRONT OPERATING PANEL CABLE FOR SIMATIC RACK IPC847C
|
Siemens
|
|
A5E03010063
|
SINAMICS G120 REPAIR PART WLX_999999 PM240 FSE U/F HOOD
|
Siemens
|
|
A5E03012863
|
SINAMICS G120 REPAIR PART WLX_999999 PM240 FSE NFIL CAP CHEM.OPT
|
Siemens
|
|
A5E03016398
|
SIMATIC IPC, SPARE PART, CABLE SET SATA DATA (5X) FOR 2X HDD FOR SIMATIC RACK IPC847C
|
Siemens
|
|
A5E03016399
|
SIMATIC IPC, SPARE PART, CABLE SET SATA DATA (5X) FOR 3X HDD FOR SIMATIC RACK IPC847C
|
Siemens
|
|
A5E03012864
|
SINAMICS G120 REPAIR PART WLX_999999 PM240 FSE FIL CAP CHEM.OPT
|
Siemens
|
|
A5E03586807
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK, NPT CABLE INLET, APPROVAL OPTION A, WITH HART COMMUNICATION START-UP AT <, 3.6MA, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03588512
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK, NPT CABLE INLET, APPROVAL OPTION B, WITH PROFIBUS PA COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03251957001
|
ASSEMBLY, PCBA, CIMBASE, CONT, I/F
|
Siemens
|
|
A5E03251957002
|
ASSEMBLY, PCBA, CIMBASE, CONT, I/F
|
Siemens
|
|
A5E03253753
|
SINAMICS G120 REPAIR PART WLX_312466 HEATSINK G120 PM230 FSCFSC 354X140X55
|
Siemens
|
|
A5E03259426
|
BELT,CONVEYOR,POLYURETHANE, 18 WIDE X 146 LONG, 57 PIW, 2PLY, 1/2 B-FLANGE
|
Siemens
|
|
A5E03259756
|
SOLAR S500 MOUNTINGPLATE FERRITE
|
Siemens
|
|
A5E03707920
|
MOTOR FLANGE 2
|
Siemens
|
|
A5E03702765
|
7MH71021CXX0, FLOWGUIDE, E40 BASE, 4,XX=SPECIAL PAINT MODEL E-40 BASE MOUNT, 40 T/H MAX. DESIGN CAPACITY FLOWGUIDE SIZE 4 ASME FLANGE PATTERN FLOWGUIDE CONSTRUCTION: MILD STEEL, EPOXY PAINTED WITH ZINC PRIMER CABINET CONSTRUCTION: MILD STEEL, EPOXY PAINTED WITH ZINC PRIMER
|
Siemens
|
|
A5E03707921
|
GAS FILTER WITH HOLDER, FOR NO
|
Siemens
|
|
A5E03702828
|
7MH71023FXX0, FG, E300, 10, XX=SPECIAL PAINT E-300 BASE MOUNT, 300 T/H MAX. DESIGN CAPACITY FLOWGUIDE SIZE: 10 ASME FLANGE PATTERN FLOWGUIDE CONSTRUCTION:MILD STEEL, EPOXY PAINTED WITH ZINC PRIMER CABINET CONSTRUCTION: MILD STEEL, EPOXY PAINTED WITH ZINC PRIMER
|
Siemens
|
|
A5E03707922
|
HOLDER FOR MIRROR
|
Siemens
|
|
A5E03704036
|
7ML56401BA000LB0,W/O LOCTITE. PROCESS CONNECTION R 1 ((BSPT), EN 10226/PT (JIS-T), JIS B 0203) LENGTH: COMPACT (THREADED 120 MM THREAD.) (4.72), FLANGED 98 MM (3.86)) THERMAL ISOLATOR WITHOUT THERMAL ISOLATOR WETTED SEALS FKM PROBE MATERIAL 316L STAINLESS STEEL WITH PPS PROBE BODY APPROVALS GENERAL PURPOSE (CE, C-TICK) ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65
|
Siemens
|
|
A5E03707924
|
SIPROCESS UV600 REFERENCE CELL,
|
Siemens
|
|
A5E03704037
|
7ML56401BM000LB0-Z,WITHOUT LOCTITE,Y01=275MM. PROCESS CONNECTION R 1 ((BSPT), EN 10226/PT (JIS-T), JIS B 0203) LENGTH: (LENGTHS FROM FLANGE FACE) (THREADED LENGTHS INCLUDE PROCESS THREAD.) EXTENDED ROD, 210 TO 1000 MM (8.27 TO 39.37) THERMAL ISOLATOR: WITHOUT THERMAL ISOLATOR WETTED SEALS: FKM PROBE MATERIAL 316L STAINLESS STEEL WITH PPS PROBE BODY APPROVALS: GP (CE, C-TICK) ENCLOSURE AND LID:ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65
|
Siemens
|
|
A5E03707923
|
BEAMSPLITTER
|
Siemens
|
|
A5E03707936
|
SIPROCESS UV600 MEASURING CELL,
|
Siemens
|
|
A5E03705474
|
7ML54310XX200CC0,Y15,DN80 PN40 TYPE E. PROCESS CONNECTION AND ANTENNA MATERIAL: 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL FLANGED CONNECTIONS 316L: DN 80 PN40 EN 1092-1 TYPE E SPIGOT FACE COMMUNICATION 4-20MA HART, START-UP AT <,3.6MA ENCLOSURE: ALUMINUM, EPOXY PAINT, 2 X 1/2 NPT ANTENNA: 3 HORN APPROVALS: IS IECEX/ATEX II 1 GD EX IA IIC T4, (IS BARRIER REQUIRED), R(AND)TTE, C-TICK, INMETRO BR-EX IA IIC T4
|
Siemens
|
|
A5E03705475
|
7ML54310XX200CC0,Y15,DN80 PN40 TYPE E. PROCESS CONNECTION AND ANTENNA MATERIAL 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL FLANGED CONNECTIONS 316L DN 80 PN40 EN 1092-1 TYPE E SPIGOT FACE COMMUNICATION 4-20MA HART, START-UP AT <,3.6MA ENCLOSURE: ALUMINUM, EPOXY PAINT, 2 X 1/2 NPT ANTENNA:3HORN WITH 100MM EXT. APPROVALS:IS IECEX/ATEX II 1 GD EX IA IIC T4, (IS BARRIER REQUIRED), R(AND)TTE, C-TICK, INMETRO BR-EX IA IIC T4
|
Siemens
|
|
A5E03707925
|
SIPROCESS UV600 MEASURING CELL,
|
Siemens
|
|
A5E03706041
|
SIMATIC IPC, SPAREPART PCB ASSEMBLY, 1X PCIE X4 FOR SIMATIC IPC427D
|
Siemens
|
|
A5E03705476
|
7ML54310XX200DC0,Y15,DN100 PN40 TYPE E. PROCESS CONNECTION AND ANTENNA MATERIAL 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL FLANGED CONNECTIONS 316L: DN 100 PN40 EN 1092-1 TYPE E SPIGOT FACE COMMUNICATION 4-20MA HART, START-UP AT <,3.6MA ENCLOSURE: ALUMINUM, EPOXY PAINT, 2 X 1/2 NPT ANTENNA 4 HORN APPROVALS:IS IECEX/ATEX II 1 GD EX IA IIC T4, (IS BARRIER REQUIRED), R(AND)TTE, C-TICK, INMETRO BR-EX IA IIC T4
|
Siemens
|
|
A5E03707937
|
SIPROCESS UV600 MEASURING CELL,
|
Siemens
|
|
A5E03707938
|
SIPROCESS UV600 MEASURING CELL,
|
Siemens
|
|
A5E03706051
|
SIMATIC IPC, SPAREPART PCB ASSEMBLY, 1X PCIE X4, 1X PCIE X1 FOR SIMATIC IPC427D
|
Siemens
|
|
A5E03707235
|
SAFETY FILTER FI64
|
Siemens
|
|
A5E03707939
|
SIPROCESS UV600 MEASURING CELL,
|
Siemens
|
|
A5E03707236
|
POWER SUPPLY UNITS, 24 V 10A
|
Siemens
|
|
A5E03707940
|
SIPROCESS UV600 MEASURING CELL,
|
Siemens
|
|
A5E03707238
|
CONNECTION CABLE PLUG <,(>,<,<,)>,->,
|
Siemens
|
|
A5E03707942
|
CALIBRATION CHAMBER WITH HOLDER
|
Siemens
|
|
A5E03707941
|
CALIBRATION CHAMBER WITH HOLDER
|
Siemens
|
|
A5E03707239
|
CONNECTION CABLE POWER SUPPLY <,
|
Siemens
|
|
A5E03707240
|
DISTRIBUTION BOARD
|
Siemens
|
|
A5E03707241
|
CONNCECTION CABLE POWER SUPPLY
|
Siemens
|
|
A5E03707944
|
DETECTOR 1
|
Siemens
|
|
A5E03707945
|
DETECTOR 2
|
Siemens
|
|
A5E03707242
|
CONNCECTION CABLE CAN-BUS 0.5 M DISTRIBUTION BOARD <,(>,<,<,)>,->, I/
|
Siemens
|
|
A5E03707965
|
MAINBOARD SIPROCESS UV600 REV.0
|
Siemens
|
|
A5E03707243
|
CONNCECTION CABLE CAN-BUS 0.5 M DISTRIBUTION BOARD <,(>,<,<,)>,->, SE
|
Siemens
|
|
A5E03707966
|
SIPROCESS UV600 MAINBOARD REV.0 WITH INSTALLED ACTUAL SOFTWARE
|
Siemens
|
|
A5E03707244
|
CONNCECTION CABLE CAN-BUS 0.5 M DISTRIBUTION BOAD <,(>,<,<,)>,->, BCU
|
Siemens
|
|
A5E03707967
|
SIPROCESS UV600 MAINBOARD WITH INSTALLED SOFTWARE AND ANA
|
Siemens
|
|
A5E03707757
|
FKM HOSE D=3/5 , LENGTH=1M
|
Siemens
|
|
A5E03707758
|
STRAIGHT SCREW CONNECTION D4-S
|
Siemens
|
|
A5E03707968
|
HEATER WITH 380 MM CABLE, FOR S MEDL, GAS CELL, MOTOR FLANGE
|
Siemens
|
|
A5E03707759
|
ELBOW JOINT D4-SS316, SWLK
|
Siemens
|
|
A5E03707969
|
MOISTURE SENSOR
|
Siemens
|
|
A5E03707760
|
THREADED JOINT D4-D6, PIPE NIPP
|
Siemens
|
|
A5E03707970
|
SPARE PART SET PRESSURE SENSOR GASKET AND O-RING
|
Siemens
|
|
A5E03707971
|
FLOW SENSOR INCLUDING TEMPERATU
|
Siemens
|
|
A5E03707761
|
ACCESSORY PLUG FOR 19 ENHOUSI
|
Siemens
|
|
A5E03707972
|
STRAIGHT SCREW CONNECTION D4-S
|
Siemens
|
|
A5E03707762
|
ACCESSORY PHOENIX CONNECTOR KIT
|
Siemens
|
|
A5E03707763
|
POWER CORD, LAENGE 2M
|
Siemens
|
|
A5E03707973
|
ELBOW JOINT D4-SS316, SWLK
|
Siemens
|
|
A5E03707764
|
DISPLAY UNIT, INCL. BCU AND MAI
|
Siemens
|
|
A5E03707974
|
THREADED JOINT D4-D6, PIPE NIPP
|
Siemens
|
|
A5E03707765
|
CONNCETION CABLE DISPLAY <,(>,<,<,)
|
Siemens
|
|
A5E03707766
|
BCU MAINBOARD
|
Siemens
|
|
A5E03707986
|
DIAPHRAGM PUMP, TYPE123, 24V/50
|
Siemens
|
|
A5E03707988
|
O-RING FOR GAS PUMP SUSPENSION
|
Siemens
|
|
A5E03707987
|
DIAPHRAGM ASSEMBLY, EPDM FOR TY
|
Siemens
|
|
A5E03708033
|
SIMATIC PG, SPARE PART, HEAT SINK FOR FIELD PG M4
|
Siemens
|
|
A5E03707916
|
DISPLAY UNIT FOR BCU
|
Siemens
|
|
A5E03708919
|
ELECTRONICS BOARD SIPROCESS UV6
|
Siemens
|
|
A5E03707917
|
I/O MODULE
|
Siemens
|
|
A5E03708920
|
ELECTRONICS BOARD SIPROCESS UV6
|
Siemens
|
|
A5E03707918
|
MEDL UV LAMP WITH HEATER
|
Siemens
|
|
A5E03707919
|
MOTOR FLANGE 3
|
Siemens
|
|
A5E03714266
|
7ML5630XXN100JA0,2 IN BSPT. PROCESS CONNECTION: 2 IN BSPT PROBE LENGTH 1700 MM THERMAL ISOLATOR: WITH THERMAL ISOLATOR WETTED SEALS: FKM PROBE MATERIAL: 316L STAINLESS STEEL WITH PPS PROBE BODY APPROVALS: GENERAL PURPOSE (CE, C-TICK) ENCLOSURE AND LID: ALUMINUM EPOXY COATED 2 X 1/2 NPT VIA ADAPTER - CABLE INLET, IP65
|
Siemens
|
|
A5E03708921
|
ELECTRONICS BOARD SIPROCESS UV6 AND FACTORY SETTINGS
|
Siemens
|
|
A5E03262088
|
SITRANS FUS SPARE PARTS: 2X15 M PTFE COAXIAL CABLE FOR USE WITH TRANSMITTER FUS060 AND CRYOGENIC SENSORS, 75 OHM TYPE, PTFE, TEMPERATURE MAX. +200 TO -200 DEG.C.
|
Siemens
|
|
A5E03713161
|
ILE-37, SPARE FIBREGLASS COVER
|
Siemens
|
|
A5E03718791
|
PRESSURE SENSOR IMIB 100BAR
|
Siemens
|
|
A5E03718791V
|
PRESSURE SENSOR IMIB 100BAR
|
Siemens
|
|
A5E03722877
|
ACCESSORY SITRANS FC430 SERVICE TOOLKIT HAND TOOLS FOR ELECTRONIC AND MECHANICAL MAINTENANCE
|
Siemens
|
|
A5E03726523
|
7ML5746-XAB64-1BA0, X=TRANSISTOR SITRANS LVL200 STANDARD: ELECTRONICS: TRANSISTOR (NPN/PNP) 10...55VDC APPROVAL OVERFILL PROTECTION ACCORDING TO WHG PROCESS CONNECTION: MATERIAL FLANGE DN100, PN16 FORM C, DIN 2501 / ECTFE
|
Siemens
|
|
A5E03726512
|
7ML5746-XAB63-1BA0, X=TRANSISTOR SITRANS LVL200 STANDARD: ELECTRONICS: TRANSISTOR (NPN/PNP)10...55VDC APPROVAL WITHOUT APPROVALS PROCESS CONNECTION: MATERIAL FLANGE DN100, PN16 FORM C, DIN 2501 / HASTELLOY C22
|
Siemens
|
|
A5E03726524
|
7ML5746-XAA18-1BA0, X=TRANSISTOR SITRANS LVL200 STANDARD: ELECTRONICS: TRANSISTOR (NPN/PNP)10...55VDC APPROVAL WITHOUT APPROVALS PROCESS CONNECTION: MATERIAL FLANGE DN100, PN16 FORM C, DIN 2501 / HASTELLOY C22
|
Siemens
|
|
A5E03287264
|
SPAREPARTKIT RELAY WITH SOCKET CONSISTS OF: 1X COMPACT RELAY 2KONT-DC24V-15A 1X SOCKET FOR KU RELAY 3 POL
|
Siemens
|
|
A5E03287238
|
SPAREPARTKIT SOCKET CABINETLINKAGE DC-AC CONSISTS OF: 1X SOCKET AWG 24-12 10P GREY 1X BASEELEMENT HCC 4-FE 1X ZUB_CLAMPS HCC 4-SR
|
Siemens
|
|
A5E03287345
|
SPAREPARTKIT PLUG CABINETLINKAGE DC-AC CONSISTS OF: 1X PLUG AWG 24-12 10P 1X BASEELEMENT HCC 4-FE 1X ZUB_CLAMPS HCC 4-SR
|
Siemens
|
|
A5E03732564
|
7ML5652-5KX00-0EA0Z,Y01=2000MM PROCESS CONNECTION: 3 ASME, 150 LB LENGTH (LENGTHS FROM FLANGE FACE) (THREADED LENGTHS INCLUDE PROCESS THREAD.) EXTENDED ROD, FACTORY ADJUSTED LENGTH 750 TO 999 MM (29.53 TO 39.3) WETTED SEALS: GRAPHITE PROBE MATERIAL: 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS FLAMEPROOF ENCLOSURE WITH IS PROBE, WITH WHG ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X 1/2 NPT VIA ADAPTER - CABLE INLET, IP65 ACTIVE SHIELD LENGTH STANDARD LENGTH - (125 MM THREADED, 105 MM FLANGED)
|
Siemens
|
|
A5E03287919
|
LOW-VOLTAGE MEASURING TRANSFORMER 1000/5A-15VA-UL
|
Siemens
|
|
A5E03736415
|
LR250 PROCESS CONNECTION KIT DN150 PN25/40 B1 RAISED FACE. ASSEMBLED AND PRESSURE TESTED PROCESS CONNECTION KIT: 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FFKM SEAL DN150 PN25/40 DIN EN 1092-1 TYPE B1 RAISED FACED 100MM PTFE EMITTER FITS 100MM WAVEGUIDE EXTENSION PRESSURE RATING RATING PER PRESSURE/TEMPERATURE CURVES IN INSTRUCTION MANUAL NOTE: HORN ANTENNA NOT INCLUDED. 100MM WAVEGUIDE NOT INCLUDED
|
Siemens
|
|
A5E03731570
|
KIT,3 AIMER ASSEMBLY,LR560
|
Siemens
|
|
A5E03732561
|
7ML5652-5KX00-0EA0Z,Y01=1170MM PROCESS CONNECTION: 3 ASME, 150 LB LENGTH (LENGTHS FROM FLANGE FACE) (THREADED LENGTHS INCLUDE PROCESS THREAD.) EXTENDED ROD, FACTORY ADJUSTED LENGTH 750 TO 999 MM (29.53 TO 39.3) WETTED SEALS: GRAPHITE PROBE MATERIAL: 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS FLAMEPROOF ENCLOSURE WITH IS PROBE, WITH WHG ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X 1/2 NPT VIA ADAPTER - CABLE INLET, IP65 ACTIVE SHIELD LENGTH STANDARD LENGTH - (125 MM THREADED, 105 MM FLANGED)
|
Siemens
|
|
A5E03731571
|
KIT,4 AIMER ASSEMBLY,LR560
|
Siemens
|
|
A5E03732563
|
7ML5652-5KX00-0EA0Z,Y01=1900MM PROCESS CONNECTION: 3 ASME, 150 LB LENGTH (LENGTHS FROM FLANGE FACE) (THREADED LENGTHS INCLUDE PROCESS THREAD.) EXTENDED ROD, FACTORY ADJUSTED LENGTH 750 TO 999 MM (29.53 TO 39.3) WETTED SEALS: GRAPHITE PROBE MATERIAL: 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS FLAMEPROOF ENCLOSURE WITH IS PROBE, WITH WHG ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X 1/2 NPT VIA ADAPTER - CABLE INLET, IP65 ACTIVE SHIELD LENGTH STANDARD LENGTH - (125 MM THREADED, 105 MM FLANGED)
|
Siemens
|
|
A5E03731572
|
KIT,6 AIMER ASSEMBLY,LR560
|
Siemens
|
|
A5E03732050
|
SIMATIC IPC, SPAREPART HDD-SATA-ADAPTER MODULE FOR SIMATIC IPC427D
|
Siemens
|
|
A5E03732555
|
7ML5652-5KX00-0EA0Z,Y01=1508MM PROCESS CONNECTION: 3 ASME, 150 LB LENGTH (LENGTHS FROM FLANGE FACE) (THREADED LENGTHS INCLUDE PROCESS THREAD.) EXTENDED ROD, FACTORY ADJUSTED LENGTH 750 TO 999 MM (29.53 TO 39.3) WETTED SEALS: GRAPHITE PROBE MATERIAL: 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS FLAMEPROOF ENCLOSURE WITH IS PROBE, WITH WHG ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X 1/2 NPT VIA ADAPTER - CABLE INLET, IP65 ACTIVE SHIELD LENGTH STANDARD LENGTH - (125 MM THREADED, 105 MM FLANGED)
|
Siemens
|
|
A5E03736910
|
SITRANS FC430 SIL PRODUCT INFORMATION DE
|
Siemens
|
|
A5E03732556
|
7ML5652-5KX00-0EA0Z,Y01=1040MM PROCESS CONNECTION: 3 ASME, 150 LB LENGTH (LENGTHS FROM FLANGE FACE) (THREADED LENGTHS INCLUDE PROCESS THREAD.) EXTENDED ROD, FACTORY ADJUSTED LENGTH 750 TO 999 MM (29.53 TO 39.3) WETTED SEALS: GRAPHITE PROBE MATERIAL: 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS FLAMEPROOF ENCLOSURE WITH IS PROBE, WITH WHG ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X 1/2 NPT VIA ADAPTER - CABLE INLET, IP65 ACTIVE SHIELD LENGTH STANDARD LENGTH - (125 MM THREADED, 105 MM FLANGED)
|
Siemens
|
|
A5E03732558
|
7ML5652-5KX00-0EA0Z,Y01=1010MM PROCESS CONNECTION: 3 ASME, 150 LB LENGTH (LENGTHS FROM FLANGE FACE) (THREADED LENGTHS INCLUDE PROCESS THREAD.) EXTENDED ROD, FACTORY ADJUSTED LENGTH 750 TO 999 MM (29.53 TO 39.3) WETTED SEALS: GRAPHITE PROBE MATERIAL: 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS FLAMEPROOF ENCLOSURE WITH IS PROBE, WITH WHG ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X 1/2 NPT VIA ADAPTER - CABLE INLET, IP65 ACTIVE SHIELD LENGTH STANDARD LENGTH - (125 MM THREADED, 105 MM FLANGED)
|
Siemens
|
|
A5E03732559
|
7ML5652-5KX00-0EA0Z,Y01=1230MM PROCESS CONNECTION: 3 ASME, 150 LB LENGTH (LENGTHS FROM FLANGE FACE) (THREADED LENGTHS INCLUDE PROCESS THREAD.) EXTENDED ROD, FACTORY ADJUSTED LENGTH 750 TO 999 MM (29.53 TO 39.3) WETTED SEALS: GRAPHITE PROBE MATERIAL: 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS FLAMEPROOF ENCLOSURE WITH IS PROBE, WITH WHG ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X 1/2 NPT VIA ADAPTER - CABLE INLET, IP65 ACTIVE SHIELD LENGTH STANDARD LENGTH - (125 MM THREADED, 105 MM FLANGED)
|
Siemens
|
|
A5E03739575
|
PIPE SECTION, 12 INCH, 300LBS FLANGE, 5 DIAMETER DOWN STREAM W/3 X 3/4 AND 1 X 1/4 PROCESS CONNECTIONS
|
Siemens
|
|
A5E03746795
|
7ML54310XX101CC0,C11,C12,Y15, 3150LB RF PROCESS CONNECTION AND ANTENNA MATERIAL: 316L SS PTFE EMITTER, FKM SEAL FLANGED CONNECTIONS 316L: 3 CLASS 150 ASME B16.5, RF COMMUNICATION:PROFIBUS PA ENCLOSURE (WITH CABLE INLETS): ALUMINUM,EPOXY PAINT,2XM20X1.5 ANTENNA: 3 HORN (FITS 3 ASME OR DN 80 NOZZLES) APPROVALS: INTRINSICALLY SAFE IECEX/ATEX II 1 GD EX IA IIC T4, (IS BARRIER REQUIRED), R<,(>,)>,TTE, C-TICK, INMETRO BR-EX IA IIC T4 PRESSURE RATING:RATING PER MANUAL C11, C12, Y15
|
Siemens
|
|
A5E03740695
|
7ML13051AC211BA0-Z,C12,D07,Y15 MODEL: CHAMBER REPLACEMENT PROBE CHAMBER AND PROCESS CONNECTION MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE (B31.1 CONSTRUCTION) PROCESS CONNECTION (SIZE/TYPE): 2, 300 LB ANSI RAISED FACE FLANGE LEVEL RANGE:14,(0.356 METERS) PROCESS CONNECTION CONFIGURATION:TOP IN,BOTTOM OUT TEMPERATURE RANGE: (260C), 500F,(DIELECTRIC CONSTANT>,1.4) CHAMBER TYPE FISHER 249B Y15,C12,D07
|
Siemens
|
|
A5E03743095
|
7ML55134EXX11AA1,MONEL VERSION Y01 = 8500 MM PROCESS CONNECTION 1-1/2 NPT ((TAPER), ANSI/ASME B1.20.1) APPROVALS: GENERAL PURPOSE ENCLOSURE/CABLE INLET: 2 X 1/2 NPT IP68 OPTIONS: NONE THERMAL ISOLATOR/REMOTE VERSION: WITHOUT TI OR REMOTE ELECTRONIC OUTPUT 2-WIRE LOOP CURRENT 4TO20MA (TRANSMITTER MSP2002-2 _3300 PF) STAINLESS STEEL TAG (69 X 50MM (2.71X1.97)):INCLUDED CERTIFICATES:MANUFACTURERS TEST CERT:EN 10204-2.2 ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03589260
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK, M20 CABLE INLET, APPROVAL OPTION C, WITH PROFIBUS PA COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03586854
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK,NPT CABLE INLET, APPROVAL OPTION B, WITH HART COMMUNICATION START-UP AT <, 3.6MA, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03589262
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK, NPT CABLE INLET, APPROVAL OPTION D, WITH PROFIBUS PA COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03586887
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK, M20 CABLE INLET, APPROVAL OPTION C, WITH HART COMMUNICATION START-UP AT <, 3.6MA, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03589264
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK,M20 CABLE INLET, APPROVAL OPTION E, WITH PROFIBUS PA COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03586961
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK, NPT CABLE INLET, APPROVAL OPTION D, WITH HART COMMUNICATION START-UP AT <, 3.6MA, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03589266
|
LR250 FLANGED ENCAPSULATED ANTENNA VERSION ENCLOSURE WITH BOARD STACK, M20 CABLE INLET, APPROVAL OPTION A, WITH FOUNDATION FIELDBUS COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03587012
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK, M20 CABLE INLET, APPROVAL OPTION E, WITH HART COMMUNICATION START-UP AT <, 3.6MA, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03589275
|
LR250 FLANGED THREADED ANTENNA VERSION ENCLOSURE WITH BOARD STACK, NPT CABLE INLET, APPROVAL OPTION A, WITH FOUNDATION FIELDBUS COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03587132
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK, M20 CABLE INLET, APPROVAL OPTION F, WITH HART COMMUNICATION START-UP AT <, 3.6MA, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03589277
|
LR250 FLANGED ENCAPSULATED ANTENNA VERSION ENCLOSURE WITH BOARD STACK, NPT CABLE INLET, APPROVAL OPTION B, WITH FOUNDATION FIELDBUS COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03587223
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK, M20 CABLE INLET, APPROVAL OPTION G, WITH HART COMMUNICATION START-UP AT <, 3.6MA, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03589280
|
LR250 FLANGED ENCAPSULATED ANTENNA VERSION ENCLOSURE WITH BOARD STACK,M20 CABLE INLET, APPROVAL OPTION C, WITH FOUNDATION FIELDBUS COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03588125
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK, NPT CABLE INLET, APPROVAL OPTION H, WITH HART COMMUNICATION START-UP AT <, 3.6MA, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03588171
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK, M20 CABLE INLET, APPROVAL OPTION A, WITH PROFIBUS PA COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03029392
|
FORMCABLE TYPE 1 40 POLES
|
Siemens
|
|
A5E03589281
|
LR250 FLANGED ENCAPSULATED ANTENNA VERSION ENCLOSURE WITH BOARD STACK,NPT CABLE INLET, APPROVAL OPTION D, WITH FOUNDATION FIELDBUS COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03594974
|
7ML55174CXX42AB1-Z,6, 300LB,DUP,Y01-4472,Y02-300 6, ASME, 300 IB DUPLEX SS ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 STAINLESS STEEL, 2 X M20 X 1.5 (IP68, ADAPTER) ISOLATOR, ONLY FOR USE WHEN TEMPERATURE RANGE IS OUTSIDE OF -40 TO 85 C,2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2 _3300 PF) TAG INFORMATION:....... (MAX 27 CHARACTERS) ACCEPTANCE TEST CERTIFICATE: MANUFACTURERS TEST CERT. M TO DIN 55350,PART 18 AND IS ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03588253
|
LR250 THREADED PVDF ANTENNA VERSION ENCLOSURE WITH BOARD STACK, NPT CABLE INLET, APPROVAL OPTION A, WITH PROFIBUS PA COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03589283
|
LR250 FLANGED ENCAPSULATED ANTENNA VERSION ENCLOSURE WITH BOARD STACK, M20 CABLE INLET,APPROVAL OPTION E, WITH FOUNDATION FIELDBUS COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03029404
|
FORMCABLE TYPE 2 26 POLES
|
Siemens
|
|
A5E03596142
|
7ML1302-3AA21-3XX0,Y01=830CM ROD EXTENSION MODEL:FLEXIBLE TWIN ROD PROBE PROBE INSERTION LENGTH: 316/316L (1.4401/1.4404) STAINLESS STEEL PROBE AND PROCESS CONNECTION Y01 = 860 CM O-RINGS:KALREZ 4079 PROCESS CONNECTION:G 2 ((BSPP), EN ISO 228-1) 60CM ROD EXTENSION
|
Siemens
|
|
A5E03037912
|
SINAMICS G120 REPAIR PART WLX_311722 SCREW M4X20MM T20, ADHESIVE. 25X10X10
|
Siemens
|
|
A5E03039213
|
RTC BASIS HW V5 (BASIS RACK847C), MED-REFERENCE NR: 10660885, CORE I5 PROZESSOR (2,4 GHZ), 2 GB DDR3 SDRAM
|
Siemens
|
|
A5E03603523
|
7MH75601XA01,8M,M12 PLUG SENSOR STANDARD TEMPERATURE RANGE (-20 C TO +80 C) CABLE LENGTH 8 METERS SENSOR MOUNTING NONE APPROVALS CE SPECIAL REQUIREMENTS M12 PLUG, TO BE COMPATIBLE WITH ET200
|
Siemens
|
|
A5E03603638
|
7MH75601XA01,15M,M12 PLUG SENSOR STANDARD TEMPERATURE RANGE (-20 C TO +80 C) CABLE LENGTH 15 METERS SENSOR MOUNTING NONE APPROVALS CE SPECIAL REQUIREMENTS M12 PLUG, TO BE COMPATIBLE WITH ET200
|
Siemens
|
|
A5E03607149002
|
DOUBLE MODULE REPLACEMENT, 2 M50, HARDWARE ONLY
|
Siemens
|
|
A5E03604831
|
SIMATIC PC, SPAREPART, DC24V POWER SUPPLY CONNECTOR, FOR IPC227D, IPC277D WITH 7/9 5 PIECES PER PACKAGING UNIT
|
Siemens
|
|
A5E03607150002
|
DOUBLE MODULE REPLACEMENT, 3 M50, HARDWARE ONLY
|
Siemens
|
|
A5E03607125001
|
SINGLE MODULE, PRESSURE TEST, HARDWARE ONLY
|
Siemens
|
|
A5E03607203
|
7ML54310XX200DG0,XX=6300LB RF PROCESS CONNECTION AND ANTENNA MATERIAL 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL PROCESS CONNECTION TYPE: 6 ASME, 300 LB, RAISED FACED COMMUNICATION: 4-20MA HART, START-UP AT <,3.6MA ENCLOSURE (WITH CABLE INLETS): ALUMINUM, EPOXY PAINT, 2 X 1/2 NPT ANTENNA 4 HORN (FITS 4 ASME OR DN 100 NOZZLES) APPROVALS ATEX II 1/2 GD EEX DM IA IIC T4, EX TD A20 IP67 T90C, CE, R&TTE, C-TICK
|
Siemens
|
|
A5E03607139002
|
DOUBLE MODULE REPLACEMENT, 1 M50, HARDWARE ONLY
|
Siemens
|
|
A5E03607238
|
7ML54310XX200BG0,C11,C12,Y15, 2150LB RAISED FACE PROCESS CONNECTION AND ANTENNA MATERIAL 316L(1.4435OR1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL PROCESS CONNECTION TYPE 2 ASME, 150 LB, RAISED FACE COMMUNICATION 4-20MA HART, START-UP AT <,3.6MA ENCLOSURE (WITH CABLE INLETS) ALUMINUM, EPOXY PAINT, 2 X 1/2 NPT ANTENNA 2 HORN (FITS 2 ASME OR DN 50 NOZZLES) APPROVALS ATEX II 1/2 GD EEX DM IA IIC T4, EX TD A20 IP67 T90C, CE, R&TTE, C-TICK
|
Siemens
|
|
A5E03051205
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CORE I3 2.13 GHZ, IPC627C, HMI IPC677C
|
Siemens
|
|
A5E03051024
|
SIMATIC PC, SPARE PART, MOTHERBOARD W/O FIELDBUS, CORE I3-330E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03051026
|
SIMATIC PC, SPARE PART, MOTHERBOARD WITH PROFINET, CORE I3-330E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03051025
|
SIMATIC PC, SPARE PART, MOTHERBOARD WITH PROFIBUS, CORE I3-330E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03051206
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CORE I3 2.13 GHZ, PROFIBUS, IPC627C, HMI IPC677C
|
Siemens
|
|
A5E03051027
|
SIMATIC PC, SPARE PART, MOTHERBOARD W/O FIELDBUS, CORE I5-520E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03051207
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CORE I3 2.13 GHZ, PROFINET, IPC627C, HMI IPC677C
|
Siemens
|
|
A5E03051028
|
SIMATIC PC, SPARE PART, MOTHERBOARD WITH PROFIBUS, CORE I5-520E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03051211
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CORE I7 2.53 GHZ, IPC627C, HMI IPC677C
|
Siemens
|
|
A5E03051212
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CORE I7 2.53 GHZ, PROFIBUS, IPC627C, HMI IPC677C
|
Siemens
|
|
A5E03051213
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CORE I7 2.53 GHZ, PROFINET, IPC627C, HMI IPC677C
|
Siemens
|
|
A5E03051032
|
SIMATIC PC, SPARE PART, MOTHERBOARD WITH PROFINET, CORE I7-610E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03051029
|
SIMATIC PC, SPARE PART, MOTHERBOARD WITH PROFINET, CORE I5-520E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03051030
|
SIMATIC PC, SPARE PART, MOTHERBOARD WITHOUT FIELDBUS, CORE I7-610E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03051031
|
SIMATIC PC, SPARE PART, MOTHERBOARD WITH PROFIBUS, CORE I7-610E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03051204
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CELERON 1.86 GHZ, PROFINET, IPC627C, HMI IPC677C
|
Siemens
|
|
A5E03051202
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CELERON 1.86 GHZ, IPC627C, HMI IPC677C
|
Siemens
|
|
A5E03051203
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CELERON 1.86 GHZ, PROFIBUS, IPC627C, HMI IPC677C
|
Siemens
|
|
A5E03617087
|
7ML5423XXXXX2CCX,HART SU<,3.6MA,NPT LR200 ENCLOSURE WITH BOARD STACK, LUI DISPLAY, 5.8 GHZ, LR200 ENCLOSURE WITH BOARD NPT CABLE INLET APPROVAL OPTION C, HART COMMUNICATION NO PROCESS CONNECTION
|
Siemens
|
|
A5E03617085
|
7ML5423XXXXX2CAX,HART SU<,3.6MA,NPT LR200 ENCLOSURE WITH BOARD STACK, LUI DISPLAY, 5.8 GHZ, LR200 ENCLOSURE WITH BOARD NPT CABLE INLET APPROVAL OPTION A, HART COMMUNICATION NO PROCESS CONNECTION
|
Siemens
|
|
A5E03617088
|
7ML5423XXXXX2CEX,HART SU<,3.6MA,NPT LR200 ENCLOSURE WITH BOARD STACK, LUI DISPLAY, 6.3 GHZ, LR200 ENCLOSURE WITH BOARD NPT CABLE INLET APPROVAL OPTION E, HART COMMUNICATION NO PROCESS CONNECTION
|
Siemens
|
|
A5E03617086
|
7ML5423XXXXX2CBX,HART SU<,3.6MA,NPT LR200 ENCLOSURE WITH BOARD STACK, LUI DISPLAY, 6.3 GHZ, LR200 ENCLOSURE WITH BOARD NPT CABLE INLET APPROVAL OPTION B, HART COMMUNICATION NO PROCESS CONNECTION
|
Siemens
|
|
A5E03617202
|
7ML1301-1AA11-1AA0-Z,Y01=30CM MODEL:COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION ADD ORDER CODE Y01 AND PLAIN TEXT:INSERTION LENGTH ... CM MODEL OPTION 1,4 AND MATERIAL OF CONSTRUCTION OPTION A, E 60 CM TO 100 CM (23.6 TO 39.4 O-RINGS VITON PROCESS CONNECTION:(SIZE/TYPE) 3/4 NPT )(TAPER), ANSI/ASME B1.20.1)
|
Siemens
|
|
A5E03617209
|
MSI,7MH7122-2CH61-1A,30M LOADCELL WIRE
|
Siemens
|
|
A5E03620601
|
SIMATIC IPC SPARE PART CABLE SET IPC227D
|
Siemens
|
|
A5E03620983
|
SIMATIC IPC, SPAREPART CABLE MAINBOARD LCD BACKLIGHT WIDE 15,4 CMI FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03625243
|
LOADCELL,MSI,1000LB,30M CABLE, SPARE
|
Siemens
|
|
A5E03621052
|
SIMATIC IPC, SPAREPART CABLE LCD BLC WIDE 21,5 X 1 FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03625280
|
BELT,CONVEYOR,SBR, 700MM X 4150MM, 2PLY,220PIW
|
Siemens
|
|
A5E03627158
|
7ML54231MEX13CA1,X=350MM STAINLESS STEEL SHIELD ANTENNA MATERIAL PTFE - USES ANTENNA ADAPTER AND ADDITIONAL PROCESS CONNECTION BELOW THREADED CONNECTION: (316L STAINLESS STEEL) G 2 ((BSPP), EN ISO 228-1) ANTENNA EXTENSIONS OR INACTIVE SHIELD LENGTH 350 MM (13.8) EXTENSION, 316L STAINLESS STEEL SHIELD PROCESS SEAL/GASKET:FKM O-RING ENCLOSURE/CABLE INLET ALUMINUM, EPOXY PAINTED, 2XM20X1.5, LUI INTERFACE COMMUNICATION/OUTPUT:4-20MA HART, START-UP AT <,3.6MA APPROVAL:GP, CE PRESSURE RATING:0.5BAR(7.25PSI)
|
Siemens
|
|
A5E03627401
|
LVS200 K05 ENHANCED ELECTRICAL MODULE, SPARE ELECTRONIC
|
Siemens
|
|
A5E03627858
|
SIMATIC IPC SPARE PART, REPAIR SET MECHANICS DRIVES (DISTANCE PIECE 3X, DUMMY PANEL 3.5 FLOPPY 2X, DUMMY PANEL 3.5 1 DRIVE 2X, DUMMY PANEL 5.25 2X, ADAPTER BRACKET FOR DRIVES RETAINER 2X), FOR SIMATIC RACK IPC547D
|
Siemens
|
|
A5E03627700
|
SIMATIC IPC SPARE PART, REPAIR SET MECHANICS HOUSING (SCREW FOR FAN 10X, GRID FOR FAN 2X, SLOT BRACKET 7X, SCREW FOR SLOT BRACKET 10X, FRONT FLAP INCL. 2 KEYS, RUBBER FOOT 4X), FOR SIMATIC RACK IPC547D
|
Siemens
|
|
A5E03622869
|
7ML5431XAE201BA1, X=316L,PEEK,FKM PROCESS CONNECTION AND ANTENNA MATERIAL: 316L (1.4435 OR 1.4404) STAINLESS STEEL, PEEK EMITTERS, FKM SEAL PROCESS CONNECTION TYPE: R 2 ((BSPT), EN 10226-1) COMMUNICATION: 4-20MA HART, START-UP AT <,3.6MA ENCLOSURE (WITH CABLE INLETS): ALUMINUM,EPOXY PAINT,2XM20X1.5 ANTENNA: 2 HORN (FITS 2 ASME OR DN 50 NOZZLES) APPROVALS: GP, CE, CSA, FM, FCC, R AND TTE, C-TICK PRESSURE RATING: 0.5 BAR (7.5 PSI G) MAXIMUM
|
Siemens
|
|
A5E03623932
|
SIMATIC IPC SPARE PART REPAIR SET HEAT SPREADER FOR IPC277D
|
Siemens
|
|
A5E03627928
|
SIMATIC IPC, SPARE PART: CABLE SET SATA (SATA CABLE SET 1 2X, SATA CABLE SET 2 2X, SATA CABLE SET 3 2X, SATA ODD CABLE SET 2X), FOR SIMATIC RACK IPC547D
|
Siemens
|
|
A5E03627943
|
SIMATIC IPC SPARE PART, CABLE SET HDD ALARM (2X HDD ALARM LED CABLE RAID1, 2X HDD ALARM LED CABLE RAID5) FOR RACK IPC547D
|
Siemens
|
|
A5E03623933
|
SIMATIC IPC SPARE PART REPAIR SET HEAT SPREADER FOR IPC227D
|
Siemens
|
|
A5E03623934
|
SIMATIC IPC SPARE PART REPAIR SET HEAT SPREADER FOR POWERSUPPLY FOR IPC227D, IPC277D
|
Siemens
|
|
A5E03629341
|
SINAMICS G120 REPAIR PART WLX_999999 PM230 FSF FILTERMODULE PT+IP20
|
Siemens
|
|
A5E03623963
|
TERMINATION BOX LOADCELL, SPEED BOARD
|
Siemens
|
|
A5E03629351
|
SINAMICS G120 REPAIR PART WLX_999999 PM230 FSE FILTERMODULE PT+IP20
|
Siemens
|
|
A5E03623989
|
7ML55133EF122AA1,NACE,Y15,C12 CABLE,PFA INSULATED,WEIGHTED: Y01-8000 MM PROCESS CONNECTION: WELDED FLANGE, RAISED FACE 6, ASME, 150 IB APPROVALS: CSA/FM CLASS 1, DIV. 2, GROUPS A, B, C, D T4, ATEX II 3G 2D EEXN A (IB) IIC T6 TO T4 T100 ENCLOSURE/CABLE INLET: 2 X M20 X 1.5 (IP68, ADAPTER) OPTIONS: NO ADDITIONAL OPTIONS THERMAL ISOLATOR/REMOTE VERSION: WITHOUT TI OR REMOTE ELECTRONICS ELECTRONIC OUTPUT:2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2 _ 3300 PF) EN 10204
|
Siemens
|
|
A5E03629357
|
SINAMICS G120 REPAIR PART WLX_999999 PM230 FSD FILTERMODULE PT+IP20
|
Siemens
|
|
A5E03624078
|
CUSTOM MILLFLO, 4 5LB 304 STAINLESS STEEL
|
Siemens
|
|
A5E03635060
|
642-76-OHC-VI5 WW200 NUREMBERG
|
Siemens
|
|
A5E03631073
|
7ML54400AB000AA2, NO LOCTITE ON FLANGE. MEASUREMENT AND PROCESS TEMPERATURE RANGE: 40M MAX RANGE, -40 C TO +100 C PROCESS CONNECTION: UNIVERSAL FLAT-FACED FLANGE FITS ANSI/DIN/JIS FLANGES 3 / 80 MM, 304 STAINLESS STEEL-NO LOCTITE, REMOVABLE FLANGE ENCLOSURE: (WITH CABLE INLET) STAINLESS STEEL,1XM20X1.5 (PLASTIC GLAND INCLUDED) PRESSURE RATING 0.5 BAR G OUTPUT/COMMUNICATION: 4 TO 20 MA, HART APPROVALS GP, CSA US/C, INDUSTRY CANADA, FCC, CE, R C-TICK
|
Siemens
|
|
A5E03637691
|
SIMATIC IPC , COMPACTFLASH DIAG, 16 GB, INDUSTRIAL GRADE
|
Siemens
|
|
A5E03633877
|
7MH7102-1ZXX0 X=MILD STEEL SPECIAL PAINT Z=CUSTOM 4 FLOWGUIDE
|
Siemens
|
|
A5E03634997
|
WELDSEAL PARTS KIT, SIZE C, SPARE HARDWARE
|
Siemens
|
|
A5E03635158
|
SIMATIC IPC627C AND 16 GB COMPACTFLASH CONSISTING OF: IPC627C: 6ES7647-6CD16-0BA0, CF 16 GB A5E03637691
|
Siemens
|
|
A5E03633904
|
7MH7102-1ZXX0 X=MILD STEEL SPECIAL PAINT Z=CUSTOM 8 FLOWGUIDE
|
Siemens
|
|
A5E03638364
|
TEST CHAIN KIT FOR MODESTO MODEL 600 WEIGHFEEDER. INCLUDES TEST CHAIN BRACKET AND 1.62 LB/FT TEST CHAIN
|
Siemens
|
|
A5E03639590
|
7ML56505HC000JA2,A08,REMOTE 8M PROCESS CONNECTION: 2 ASME, 300 LB PROBE LENGTH: EXTENDED ROD, LENGTH 750 MM (29.53) THERMAL ISOLATOR: WITH THERMAL ISOLATOR WETTED SEALS: FKM PROBE MATERIAL: 316L STAINLESS STEEL WITH PFA LINING AND PEEK ISOLATORS APPROVALS: GP (CE, C-TICK) ENCLOSURE: ALUMINUM EPOXY COATED 2X1/2 NPT VIA ADAPTER - CABLE INLET, IP65 ACTIVE SHIELD LENGTH: EXTENDED SHIELD - (400 MM THREADED, 380 MM FLANGED)
|
Siemens
|
|
A5E03635009
|
624-68-OHC-VI5 WW200 NUREMBERG
|
Siemens
|
|
A5E03082919
|
SITRANS FM ACCESSORY 2 PCS. GROUNDING RINGS STAINLESS STEEL DN 500 (20 INCH)
|
Siemens
|
|
A5E03635012
|
WELDSEAL PARTS KIT, SIZE D,E, SPARE HARDWARE
|
Siemens
|
|
A5E03082907
|
SITRANS FM ACCESSORY 2 PCS. GROUNDING RINGS STAINLESS STEEL DN 50 (2 INCH)
|
Siemens
|
|
A5E03082917
|
SITRANS FM ACCESSORY 2 PCS. GROUNDING RINGS STAINLESS STEEL DN 400 (16 INCH)
|
Siemens
|
|
A5E03082918
|
SITRANS FM ACCESSORY 2 PCS. GROUNDING RINGS STAINLESS STEEL DN 450 (18 INCH)
|
Siemens
|
|
A5E03082920
|
SITRANS FM ACCESSORY 2 PCS. GROUNDING RINGS STAINLESS STEEL DN 600 (24 INCH)
|
Siemens
|
|
A5E03086288
|
SITRANS F M MAG 3100 OP INSTR DE
|
Siemens
|
|
A5E03086290
|
SITRANS F M MAG 3100 OP INSTR FR
|
Siemens
|
|
A5E03082908
|
SITRANS FM ACCESSORY 2 PCS. GROUNDING RINGS STAINLESS STEEL DN 65 (2,5 INCH)
|
Siemens
|
|
A5E03086291
|
SITRANS F M MAG 3100 OP INSTR ES
|
Siemens
|
|
A5E03082909
|
SITRANS FM ACCESSORY 2 PCS. GROUNDING RINGS STAINLESS STEEL DN 80 (3 INCH)
|
Siemens
|
|
A5E03082913
|
SITRANS FM ACCESSORY 2 PCS. GROUNDING RINGS STAINLESS STEEL DN 200 (8 INCH)
|
Siemens
|
|
A5E03082910
|
SITRANS FM ACCESSORY 2 PCS. GROUNDING RINGS STAINLESS STEEL DN 100 (4 INCH)
|
Siemens
|
|
A5E03082914
|
SITRANS FM ACCESSORY 2 PCS. GROUNDING RINGS STAINLESS STEEL DN 250 (10 INCH)
|
Siemens
|
|
A5E03082911
|
SITRANS FM ACCESSORY 2 PCS. GROUNDING RINGS STAINLESS STEEL DN 125 (5 INCH)
|
Siemens
|
|
A5E03082912
|
SITRANS FM ACCESSORY 2 PCS. GROUNDING RINGS STAINLESS STEEL DN 150 (6 INCH)
|
Siemens
|
|
A5E03082915
|
SITRANS FM ACCESSORY 2 PCS. GROUNDING RINGS STAINLESS STEEL DN 300 (12 INCH)
|
Siemens
|
|
A5E03082916
|
SITRANS FM ACCESSORY 2 PCS. GROUNDING RINGS STAINLESS STEEL DN 350 (14 INCH)
|
Siemens
|
|
A5E03089720
|
SITRANS F DEVICENET FOR USMII COMMUNICATION MODULE OP INSTR EN
|
Siemens
|
|
A5E03647415
|
SPARE,ILE-37 DAMPER WINDOW KIT INCLUDES: LUCITE WINDOW O-RING, HARDWARE
|
Siemens
|
|
A5E03640903
|
7ML13016AB511XX0, DN200,PN16,SEGMENT PROB MODEL: COAXIAL, INTERFACE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 444 CM O-RINGS: VITON EN/DIN FLANGES: DN 200 PN 16 EN 1092-1 TYPE A FLAT-FACED FLANGE
|
Siemens
|
|
A5E03649101
|
SIMATIC PG, SPARE PART, MOTHERBOARD FOR FIELD PG M4 WITH S5 INTERFACE WITH S5 EPROMMER W/O PROCESSOR, W/O RAM
|
Siemens
|
|
A5E03644134
|
SITRANS F M MAG 8000 GSM/GPRRS ADD-ON OP INSTR EN
|
Siemens
|
|
A5E03645010
|
7ML5650-1DD00-0JB2: SHIELD = 500MM PROCESS CONNECTION: R 1 1/2 (BSPT), EN 10226/PT (JIS-T) LENGTH: EXTENDED ROD, LENGTH 1000 MM (39.37) THERMAL ISOLATOR: WITHOUT THERMAL ISOLATOR WETTED SEALS: FKM PROBE MATERIAL: 316L STAINLESS STEEL WITH PFA LINING AND PEEK ISOLATORS APPROVALS: GP (CE, C-TICK) ENCLOSURE: ALUMINUM EPOXY COATED 2XM20X1.5 CABLE INLET, IP65 ACTIVE SHIELD LENGTH: EXTENDED SHIELD - (400 MM THREADED, 380 MM FLANGED)
|
Siemens
|
|
A5E03649102
|
SIMATIC PG, SPARE PART, MOTHERBOARD FOR FIELD PG M4 W/O S5 INTERFACE W/O S5 EPROMMER W/O PROCESSOR, W/O RAM
|
Siemens
|
|
A5E03849625
|
SITRANS LR260 WITH ATEX II 1GD EX IA IIC APPROVAL 7ML54270CL000AE0 PROCESS CONNECTION:4 / 100 MM ANTENNA:4 HORN ANTENNA, FITS 100 MM OR 4 NOZZLES PURGE(SELF CLEANING)CONNECTION: NO PURGE CONNECTION OUTPUT/COMMUNICATION:PROFIBUS PA CABLE INLET: 2 X M20 X 1.5 AREA CLASSIFICATION: INTRINSICALLY SAFE,IECEX/ATEX II 1 GD EX IA IIC T4, EX TD A20 IP67 T90C PRESSURE RATING: 3 BAR (43.51 PSI) BAR PRESSURE RATING
|
Siemens
|
|
A5E03645914
|
7ML54311XX201DF1,XX=6 150 FF PROCESS CONNECTION AND ANTENNA MATERIAL:316L (1.4435 OR 1.4404) SS, PTFE EMITTER, FFKM SEAL PROCESS CONNECTION TYPE:6 ASME, 150 LB, FLAT FACED COMMUNICATION:4-20MA HART, START-UP AT <,3.6MA ENCLOSURE(WITH CABLE INLETS): ALUMINUM, EPOXY PAINT, 2 X M20 X 1.5 ANTENNA:4 HORN (FITS 4 ASME OR DN 100 NOZZLES) APPROVALS:ATEX II 1/2 GD EEX EM IA IIC T4, EX TD A20 IP67 T90C, CE, R&TTE, C-TICK PRESSURE RATING:0.5 BAR (7.5 PSI G) MAXIMUM
|
Siemens
|
|
A5E03403941V
|
UPPER CASE ISID PRE-MOUNTED
|
Siemens
|
|
A5E03846481
|
7MH75601XA03, X=10M SENSOR STANDARD TEMPERATURE RANGE (-20 C TO +80 C) CABLE LENGTH 10 METERS (32.81 FT) SENSOR MOUNTING NONE APPROVALS FM/CSA CLASS II DIV. 1, GROUPS E, F AND G, COMES WITH 1/2 NPT FEMALE ADAPTOR
|
Siemens
|
|
A5E03849682
|
CONVEYOR BELT, POLY URETHANE, WHITE, 18 WIDE X 212 LONG, 57 PIW, 2 PLY, AFLANGE, FDA, ANTI-STATIC, ENDLESS SPLICE
|
Siemens
|
|
A5E03409989
|
SITRANS F M MAG 8000 MODBUS RTU OP INSTR EN
|
Siemens
|
|
A5E03405965
|
SIMATIC PC SPARE PART, MAINBOARD D2156-S21, CHIP SET I945G, GBIT LAN, GRAPHIC, AUDIO, RAID, FOR RACK PC 547B WIN2000 AND WIN2000 SERVER ONLY
|
Siemens
|
|
A5E03404000
|
SIMATIC PC, SPARE PART, DC24V POWER SUPPLY CONNECTOR, 3-POLE, FOR IPC62X, IPC82X, HMI IPC57X, IPC67X, PCU50X, FLAT PANEL 6AV7861..., 5 PIECES PER PACKAGING UNIT
|
Siemens
|
|
A5E03850687
|
7ML5660XXA010DB0 PROCESS CONNECTION DN 25, PN 40 RF TYPE B1 FLANGE LENGTH: STANDARD VERSION, ROD 350 MM (13.78) THERMAL ISOLATOR WITHOUT THERMAL ISOLATOR WETTED SEALS FFKM (FOR PROCESS TEMPERATURES ABOVE -20 C) PROBE MATERIAL 316L STAINLESS STEEL WITH PFA LINING AND PEEK ISOLATORS APPROVALS FLAMEPROOF ENCLOSURE WITH IS ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65 ACTIVE SHIELD LENGTH STANDARD LENGTH - (125 MM THREADED, 105 MM FLANGED)
|
Siemens
|
|
A5E03858060
|
H2S-SENSOR (MR 0-5/50 VPM)
|
Siemens
|
|
A5E03855966
|
MILLTRONICS MSI BELT SCALE MSI,7MH7122-2CT7X-XA-Z,RAL COL 7037.SCALE CONSTRUCTION: HAZARDOUS DUTY CSA/FM CLASS II, DIV.1,GROUPS E, F, G AND CLASS III.BELT WIDTH ANDA DIMENSION:77,A= 86(2184MM) LOAD CELL CAPACITY:1250 LB (567.0KG)1).FABRICATION: POLYESTER PAINTED MILD STEEL SYSTEM SPECIFICATION:STANDARD MSI AND MMI.TEST.CERTIFICATE: C11 MANUFACTURERS TEST CERT ACCORDING TO EN10204-2.Y15 SS
|
Siemens
|
|
A5E03855967
|
CSTM INCLINOMETER, 7MH7726-1AP, CL2 DIV2 TO SUIT CLASS II DIV 2 GROUP F INCLINOMETER WILL BE RATED FOR CLASS I GROUP A, B,C, & D
|
Siemens
|
|
A5E03856041
|
WW300 12 PULLEY BEARING, 4BOLT FLG,2-7/16
|
Siemens
|
|
A5E03856042
|
WW300 14 PULLEY BEARING, 4BOLT FLG,2-7/16
|
Siemens
|
|
A5E03859961
|
DUMMY PLATE FOR GAS MANAGEMENT MODULE , GASKET, MANUAL
|
Siemens
|
|
A5E03857162
|
ELECTRONICS MODULE LVL200 NAMUR
|
Siemens
|
|
A5E03859986
|
SET GASKETS INCL. DOOR GASKET FOR WALL MOUNT BASE UNIT
|
Siemens
|
|
A5E03411234V
|
SET OF CORNER PROTECTIONS UPPER
|
Siemens
|
|
A5E03859990
|
DOOR GASKET FOR WALL MOUNT BASE UNIT
|
Siemens
|
|
A5E03412711V
|
GASKET KIT INTERFACE MODULE ISI
|
Siemens
|
|
A5E03411257V
|
ASSEMBLY KIT DISPLAY ISID
|
Siemens
|
|
A5E03411331V
|
DISPLAY-TOUCH MODULE ISID
|
Siemens
|
|
A5E03412758
|
MAG 8000 GSM/GPRS COMMUNICATION MODULE
|
Siemens
|
|
A5E03411346V
|
KIT CABLES AND FLAT CABLES ISID
|
Siemens
|
|
A5E03411315V
|
CONTROL-DISPLAYPANEL ISID PRE
|
Siemens
|
|
A5E03412809V
|
MOTHERBOARD ISID WITH ACCESSORI
|
Siemens
|
|
A5E03412823V
|
SET OF CORNER PROTECTIONS LOWER
|
Siemens
|
|
A5E03412848V
|
HOUSING COVERS PLASTIC ISID
|
Siemens
|
|
A5E03411375V
|
LOWER CASE ISID PREMOUNTED
|
Siemens
|
|
A5E03412870V
|
HOUSING COVERS MG ISID
|
Siemens
|
|
A5E03411786V
|
SPEAKER ISID
|
Siemens
|
|
A5E03412897V
|
BLUETOOTH MODULE INCL. ACCESSOR
|
Siemens
|
|
A5E03411814V
|
BATTERY LOCKING MECHANISM CPL.
|
Siemens
|
|
A5E03412564V
|
ASSEMBLY KIT SPEAKER ISID
|
Siemens
|
|
A5E03412939V
|
FAN ISID INCL. ACCESSORIES
|
Siemens
|
|
A5E03412659V
|
BATTERY INTERFACE COMPLETE ISID
|
Siemens
|
|
A5E03860003
|
COVER FOR THREADED JOINTS, CABLE
|
Siemens
|
|
A5E03651143
|
SITRANS FC430 OP INSTR DE
|
Siemens
|
|
A5E03862650
|
SUPPLY CABLE FOR ANALYZER MODULE 2
|
Siemens
|
|
A5E03651152
|
SITRANS FC430 OP INSTR ES
|
Siemens
|
|
A5E03652918
|
7MH71001EB61, MILLFLO, 4 2LB, 316SS SIZE AND FABRICATION: 4, 316 STAINLESS STEEL LOAD CELL: 2 IB STAINLESS STEEL SENSING PLATE FABRICATION: FOR SIZES 4 / DN 100 ONLY
|
Siemens
|
|
A5E03651188
|
SITRANS FC430 OP INSTR FR
|
Siemens
|
|
A5E03658154
|
7ML56031FC111XA0, Y01=2000MM, CRYOGENIC ELECTRONIC TRANSMITTER MSP2002-1 (330 PF) SINGLE PIECE FLANGE,316L SS, TYPE B1 RAISED FACED DN80 PN16 PROBE INSULATION/MATERIAL OF PROCESS CONNECTION PFA INSULATION/316L SS APPROVALS GENERAL PURPOSE PROBE/ELECTRODE DIAMETER 16 MM (0.63) RIGID ROD, MAXIMUM LENGTH 1000 MM(39.4) THERMAL ISOLATOR/REMOTE VERSION RIGID THERMAL ISOLATOR FOR PROCESS TEMPERATURE OVER +85 C (+185 F) Y01=2000MM Y02=50MM
|
Siemens
|
|
A5E03651190
|
SITRANS FC430 OP INSTR IT
|
Siemens
|
|
A5E03658218
|
7ML5735-1AB11-0AA0,Y01=195 MM INPUT VOLTAGE: DPDT RELAY - 19 TO 253 V AC, 19 TO 55 V DC PROCESS TEMPERATURE UP TO 150 C (+302 F) PROCESS CONNECTION:1 1/4 NPT ((TAPER), ANSI/ASME B1.20.1) EXTENSION LENGTH STAINLESS STEEL 316TI (1.4571) APPROVALS CSA/FM GENERAL PURPOSE, CE, C-TICK TOTAL INSERTION LENGTH: Y01 = 195MM
|
Siemens
|
|
A5E03118474001
|
MAXUM SSSI SIEMENS I2C BUS INTERFACE ASSEMBLY PART SEALED CABLE FEEDTROUGH GC TO TOP TERMINATION BOX
|
Siemens
|
|
A5E03659229
|
7ML5650-3BA10-0HB0, Y01=350, Y02=250MM PROCESS CONNECTION G 1 (BSPP) LENGTH (THREADED LENGTHS INCLUDE PROCESS THREAD.) STANDARD VERSION, ROD 350 MM (13.78) THERMAL ISOLATOR WITH TI WETTED SEALS FKM PROBE MATERIAL: 316L SS WITH PFA LINING AND PEEK ISOLATORS APPROVALS: CSA/FM CLASS I, DIV. 1, GR. A, B, C, D, CSA/FM CLASS II, DIV. 1, GR. E, F, G, CSA/FM CLASS I ENCLOSURE:ALUMINUM EPOXYCOATED 2 X M20X1.5 CABLE INLET,IP65 ACTIVE SHIELD LENGTH EXTENDED SHIELD - (250 MM THREADED, 230 MM FLANGED)
|
Siemens
|
|
A5E03660721001
|
INPUT-OUTPUT SPARE KIT, ADIO_I2C BD, 4 EACH AI/AO/DI/DO
|
Siemens
|
|
A5E03661964
|
7ML57312BX142AA0,DN200, PN16,DIN 2632,FLAT FACED
|
Siemens
|
|
A5E03660723001
|
INPUT-OUTPUT SPARE KIT, DIO_I2C BD, 8 DO, 6 DI
|
Siemens
|
|
A5E03660722001
|
INPUT-OUTPUT SPARE KIT, AIO_I2C BD, 8AO, 8AI, 2DI
|
Siemens
|
|
A5E03661928
|
7ML13016AB312XX0,Y15,3000MM, DN100PN40 E MODEL: COAXIAL, INTERFACE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: 300CM O-RINGS: EPDM (ETHYLENE PROPYLENE RUBBER) PROCESS CONNECTION (SIZE/TYPE) DN 100 PN 25/40 EN 1092-1 TYPE E FACE ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX. 610 CM (240.2) Y01 = 300CM Y15 TAG LIRA442
|
Siemens
|
|
A5E03664503
|
MILLFLO, 7MH7101-2AB12, 150MM MS, 2 LB SIZE AND FABRICATION: 150 MM, STANDARD ORANGE PAINT LOAD CELL: 2 LB, STAINLESS STEEL SENSING PLATE FABRICATION: 304 STAINLESS STEEL
|
Siemens
|
|
A5E03668357
|
SIMATIC PC, SPARE PART LCD DISPLAY 19 WIDE F0R SIMATIC PANEL PC IPC277D 1366 X 768 PIXEL
|
Siemens
|
|
A5E03668361
|
SIMATIC IPC, SPAREPART LCD TFT 21,5 LG X 1 FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03127548
|
SIMATIC IPC, DIGITAL I/O CARD PCIE IPC227D DIO4, 4X DIG IN / 4 X DIG OUT FOR NANOBOX IPC227D
|
Siemens
|
|
A5E03661957
|
7ML54310XX200DC0,Y15,DN100 PN40 1092-1 E PROCESS CONNECTION AND ANTENNA MATERIAL: 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL PROCESS CONNECTION TYPES: DN 100PN40 EN1092-1 TYPE E FACE SPIGOT FACED COMMUNICATION 4-20MA HART, START-UP AT <,3.6MA ENCLOSURE (WITH CABLE INLETS): ALUMINUM, EPOXY PAINT, 2 X 1/2 NPT ANTENNA: 4 HORN (FITS 4 ASME OR DN 100 NOZZLES) APPROVALS INTRINSICALLY SAFE: IECEX/ATEX II 1 GD EX IA IIC T4, (IS BARRIER REQUIRED)
|
Siemens
|
|
A5E03677996
|
WFDR,830-63-OGAR-XIX VIETNAM
|
Siemens
|
|
A5E03668682
|
LVL100 SPARE ELECTRONICS CONTACTLESS
|
Siemens
|
|
A5E03661958
|
7ML57472DXXX1BA2,DN150,PN25, TYPEA. ELECTRONICS: CONTACTLESS ELECTRONIC SWITCH 20...250 V AC/DC APPROVAL ATEX II 1/2G, 2G EEX D IIC T6 + WHG PROCESS CONNECTION / MATERIAL FLANGE DN150 PN25 TYPE A, EN 1092-1 / 316L ADAPTER/PROCESS TEMPERATURE WITHOUT ADAPTER / -50...150C HOUSING/CABLE ENTRY ALUMINIUM IP66/IP67 / 1/2 NPT RIGID EXTENSION 316L Y01: 1200
|
Siemens
|
|
A5E03123922
|
SIMATIC IPC, SPARE PART, REPEAR SET CABLE 1X USB CABLE, 1X FRONTFAN ADAPTER, 1X FRONT OPERATING PANEL CABLE 1X SATA-ODD CABLE (DATA&POWER), 1X SATA-CF CABLE (DATA&POWER), 1X SATA-HDD CABLE SET DATA FOR SIMATIC RACK IPC647C
|
Siemens
|
|
A5E03673171
|
MILLFLO, 7MH7101-2AC12, 150MM MILD STEEL, 5 LB. SIZE AND FABRICATION: 150 MM, STANDARD ORANGE PAINT LOAD CELL: 5 LB, STAINLESS STEEL SENSING PLATE FABRICATION: 304 STAINLESS STEEL
|
Siemens
|
|
A5E03677426
|
SIMATIC IPC, SPARE PART, CABLE SET SAS RAID (1X SAS DATA CABLE, 1X SAS LED CABLE) FOR SIMATIC RACK PC IPC647C, IPC847C
|
Siemens
|
|
A5E03676560
|
ILE37, SM DIAPHRAGM RING AND HARDWARE,SPARES. 1 MACHINED ALUMINUM RING (PBD-54000141) 4 SHCS M6 X 1, 12 MM LONG, 304 STAINLESS STEEL
|
Siemens
|
|
A5E03678151
|
7ML57313AFXX1AA0,Y01-270MM
|
Siemens
|
|
A5E03683888
|
7ML11062XA200A,80M PROCESS CONNECTION R 1 ((BSPT), EN 10226) CABLE LENGTH 80 M FACING STANDARD (CSM RUBBER) APPROVALS FM CLASS I, ATEX II 2G, CSA CLASS I DIV. 2, SAA CLASS I MOUNTING FLANGE (FLUSH MOUNT) NONE
|
Siemens
|
|
A5E03676957
|
7ML54260XF001CA0, X=2 UNI FLANGE PROCESS CONNECTION: 2/50MM UNIVERSAL, FLAT FACED, WITH INTEGRAL EASY AIMER BALL ANTENNA: 4 HORN ANTENNA PURGE (SELF CLEANING): CONNECTION NO PURGE CONNECTION OUTPUT / COMMUNICATION: PROFIBUS PA POWER SUPPLY / CABLE INLET 24 V DC, 2 X M20 X 1.5 APPROVALS: GENERAL PURPOSE, CSA US/C, INDUSTRY CANADA, FCC, CE, R AND TTE PRESSURE RATING 0.5 BAR
|
Siemens
|
|
A5E03679158
|
7ML56301AC200CB0, REMOTE MOUNT 2M PROCESS CONNECTION R 3/4 ((BSPT), EN 10226/PT (JIS-T), JIS B 0203) PROBE LENGTH EXTENDED ROD, 350 MM (13.78) REMOTE MOUNT ELECTRONICS AND MOUNTING BRACKET REMOTE MOUNT ELECTRONICS WITH 2M(79)CABLE WETTED SEALS FKM PROBE MATERIAL 316L STAINLESS STEEL WITH PPS PROBE BODY APPROVALS DUST IGNITION PROOF, CE, C-TICK,ATEX II 1/2 D T100 ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65
|
Siemens
|
|
A5E03676961
|
7ML57313AX131BA0.DN50,PN16 POWER SUPPLY: 18 TO 50 V DC PNP PROCESS TEMPERATURE: WITHOUT TEMPERATURE ISOLATOR PROCESS CONNECTION: FLANGED, DN100 PN 16, EN1092-1 (1.4541/321) EXTENSION LENGTH:Y01=520MM MATERIAL PROCESS CONNECTION/ EXTENSION STAINLESS STEEL 304 (1.4301) APPROVALS: ATEX II 1/2 D, C-TICK
|
Siemens
|
|
A5E03679739
|
7ML56311DC000JB0 WITH EXTRA PROCESS CONNECTION. PROCESS CONNECTION: R 1 1/2 ((BSPT), EN 10226/PT (JIS-T), JIS B 0203) PROBE LENGTH: EXTENDED CABLE, 5000 MM THERMAL ISOLATOR WITHOUT THERMAL ISOLATOR PROBE MATERIAL FKM AND PTFE APPROVALS FEP JACKETED CABLE WITH PPS PROBE BODY ENCLOSURE AND LID GENERAL PURPOSE (CSA, FM) ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65
|
Siemens
|
|
A5E03682417
|
WW300, 830-197-OGAR-VIX, VIETNAM
|
Siemens
|
|
A5E03682502
|
WW100, 7MH7180-1MEXXXXB1-Z Y71=KG/HR, Y72=0.01, Y73=100, Y74=9.13
|
Siemens
|
|
A5E03682569
|
WW200, 618-52-EGC-VIX, BELGIUM. LIST PRICE BASED ON QUOTE FSG-11-362REV2 - DELIVERY VIA SEA FREIGHT
|
Siemens
|
|
A5E03685494
|
SITRANS LR 200, FLANGE ADAPTER/PTFE ROD ANTENNA VERSION 2-WIRE, 6 GHZ PULSE RADAR LEVEL TRANSMITTER FOR CONTINUOUS MONITORING OF LIQUIDS AND SLURRIES IN STORAGE AND PROCESS VESSELS INCLUDING HIGH TEMPERATURE AND PRESSURE, TO A RANGE OF 20 M (66 FT).
|
Siemens
|
|
A5E03690782
|
SIMATIC IPC, SPARE PART, RAID CONTROLLER PCIE X8, SAS, ADAPTEC 5405Z, 512MB CACHE, WITH ZMM FOR SIMATIC RACK PC IPC647C, IPC847C
|
Siemens
|
|
A5E03688775
|
7ML5631-1DAX0-0CB0, X=2M RME PROCESS CONNECTION R 1 1/2 ((BSPT), EN 10226/PT(JIS-T), JIS B 0203) 3000 MM (118.11), LENGTH CAN BE SHORTENED BY CUSTOMER REMOTE MOUNT ELECTRONICS AND MOUNTING BRACKET REMOTE MOUNT ELECTRONICS WITH 2 M (79) OF CABLE WETTED SEALS FKM AND PTFE PROBE MATERIAL FEP JACKETED CABLE WITH PPS PROBE BODY APPROVALS DUST IGNITION PROOF CE C-TICK, ATEX II 1/2D T100 ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65
|
Siemens
|
|
A5E03682575
|
7ML54310XX201DC0-Z,C11, Y15,C20,4150 RF PROCESS CONNECTION AND ANTENNA MATERIAL 316L (1.4435 OR 1.4404)SS, PTFE EMITTER, FKM SEAL 4 CLASS 150 ASME B16.5, RAISED FACE COMMUNICATION 4-20MA HART, START-UP AT <,3.6MA ENCLOSURE (WITH CABLE INLETS) ALUMINUM, EPOXY PAINT, 2 X M20 X 1.5 ANTENNA 4 HORN (FITS 4 ASME OR DN 100 NOZZLES) APPROVALS IS:IECEX/ATEX II 1 GD EX IA IIC T4, (IS BARRIER REQUIRED), R AND TTE PRESSURE RATING RATING PER PRESSURE/TEMPERATURE CURVES IN INSTRUCTION MANUAL
|
Siemens
|
|
A5E03693426
|
LINEARITY VERIFICATION KIT NH3 (VERSION 2) , 10 CELLS
|
Siemens
|
|
A5E03696553
|
SINUMERIK 802D SL CNC SOFTWARE ON CF-CARD VERSION G/N PRO SW 1.4 SP7 HF1 NO FREE DELIVERY VERSION
|
Siemens
|
|
A5E03691453
|
7ML54310AF201XA1, X=4 HORN,PURGE PROCESS CONNECTION AND ANTENNA MATERIAL 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL PROCESS CONNECTION TYPES G 2 ((BSPP), EN ISO 228-1) (PARALLEL THREAD) COMMUNICATION 4-20MA HART, START-UP AT <,3.6MA ENCLOSURE (WITH CABLE INLETS) ALUMINUM, EPOXY PAINT, 2 X M20 X 1.5 ANTENNA 4 HORN, PURGED AT EMITTER APPROVALS GP, CE, CSA, FM, FCC, R AND TTE, C-TICK PRESSURE RATING 0.5 BAR
|
Siemens
|
|
A5E03699730
|
SIMATIC PC, SPARE PART, MAINBOARD IPC227D, 1.3 GHZ, 2 GB RAM, REM, B1/A3
|
Siemens
|
|
A5E03691475
|
7ML54231XX003CA1, XX=DN125PN16 FF. ANTENNA MATERIAL ANTENNA ADAPTER: PTFE FLAT FACED FLANGES (316L STAINLESS STEEL)DN 125 PN 16, TYPE A, FLAT FACED ANTENNA EXTENSIONS OR INACTIVE SHIELD LENGTH NONE PROCESS SEAL/GASKET INTEGRAL GASKET, FOR FF FLANGE PROCESS CONNECTIONS ONLY ENCLOSURE/CABLE INLET ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5,LUI INTERFACE COMMUNICATION/OUTPUT 4-20MA HART,START-UP AT<,3.6MA APPROVAL GENERAL PURPOSE, CE, PRESSURE RATING 0.5 BAR MAX
|
Siemens
|
|
A5E03699731
|
SIMATIC PC, SPARE PART, MAINBOARD IPC227D, 1.0 GHZ, 1 GB RAM, REM, B1/A3
|
Siemens
|
|
A5E03692459
|
BELT,CNVR,PU,18X146,57PIW,2PLY
|
Siemens
|
|
A5E03699732
|
SIMATIC PC, SPARE PART, MAINBOARD IPC227D, 600 MHZ, 512 MB RAM, REM, B1/A3
|
Siemens
|
|
A5E03699733
|
SIMATIC PC, SPARE PART, MAINBOARD IPC227D, 1.3 GHZ, 2 GB RAM, B1/A3
|
Siemens
|
|
A5E03693662
|
SIMATIC PC, SPARE PART, MAINBOARD IPC277D, 1.3 GHZ, 2 GB RAM, B1/A3
|
Siemens
|
|
A5E03699735
|
SIMATIC PC, SPARE PART, MAINBOARD IPC227D, 600 MHZ, 512 MB RAM, B1/A3
|
Siemens
|
|
A5E03699734
|
SIMATIC PC, SPARE PART, MAINBOARD IPC227D, 1.0 GHZ, 1 GB RAM, B1/A3
|
Siemens
|
|
A5E03693700
|
SIMATIC PC, SPARE PART, MAINBOARD IPC277D, 1.0 GHZ, 1 GB RAM, REM, B1/A3
|
Siemens
|
|
A5E03699752
|
7MH71801AA013BB1,WW100, HI-TEMP BELT FRAMEAND ENCLOSURE CONSTRUCTION:PAINTED MILD STEEL ENCLOSED STYLE WITH PAINTED MILD STEEL ENCLOSURE MATERIAL CONTAINMENT CONSTRUCTION:SHEAR GATE INLET AND SKIRTBOARDS 304 SS LOAD CELL:15 KG (33LB) NICKEL PLATED STEEL SPEED SENSOR: 1000 PPR SHAFT MOUNTED OPTICAL ENCODER DRIVE CONFIGURATION:380-480V 3 PH, WITH 25 M (82 FT) COMMUNICATION AND POWER CABLES CALIBRATION METHOD: 1 CALIBRATION CHAIN STRAND 2.41 KG/M (1.62 LBS/FT) DESIGN ACCESS SIDE:RIGHT HAND
|
Siemens
|
|
A5E03699751
|
7ML54310XX201DA1,6 150 FF PROCESS CONNECTION AND ANTENNA MATERIAL: 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL PROCESS CONNECTION TYPE: 6 ASME, 150 LB, FLAT FACED COMMUNICATION: 4-20MA HART, START-UP AT <,3.6MA ENCLOSURE (WITH CABLE INLETS): ALUMINUM, EPOXY PAINT, 2 X M20 X 1.5 ANTENNA 4 HORN (FITS 4 ASME OR DN 100 NOZZLES) APPROVALS: GP, CE, CSA, FM, FCC, R(&)TTE, C-TICK PRESSURE RATING 0.5 BAR (7.5 PSI G) MAXIMUM
|
Siemens
|
|
A5E03693701
|
SIMATIC PC, SPARE PART, MAINBOARD IPC277D, 1.0 GHZ, 1 GB RAM, B1/A3
|
Siemens
|
|
A5E03743096
|
7ML55132EXX11AA1,MONEL VERSION Y01 = 4600 MM PROCESS CONNECTION 1-1/2 NPT ((TAPER), ANSI/ASME B1.20.1) APPROVALS: GENERAL PURPOSE ENCLOSURE/CABLE INLET: 2 X 1/2 NPT IP68 OPTIONS: NONE THERMAL ISOLATOR/REMOTE VERSION: WITHOUT TI OR REMOTE ELECTRONIC OUTPUT 2-WIRE LOOP CURRENT 4TO20MA (TRANSMITTER MSP2002-2 _3300 PF) STAINLESS STEEL TAG (69 X 50MM (2.71X1.97)):INCLUDED CERTIFICATES:MANUFACTURERS TEST CERT:EN 10204-2.2 ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03694109
|
SITRANS FC070 WITH PCS 7 OP INSTR EN
|
Siemens
|
|
A5E03746802
|
7ML54310XX101GC0,C11,C12,Y15, 3150LB RF PROCESS CONNECTION AND ANTENNA MATERIAL: 316L SS PTFE EMITTER, FKM SEAL FLANGED CONNECTIONS 316L: 3 CLASS 150 ASME B16.5, RF COMMUNICATION:PROFIBUS PA ENCLOSURE (WITH CABLE INLETS): ALUMINUM,EPOXY PAINT,2XM20X1.5 ANTENNA: 3 HORN WITH 100 MM EXTENSION APPROVALS: INTRINSICALLY SAFE IECEX/ATEX II 1 GD EX IA IIC T4, (IS BARRIER REQUIRED), R&TTE, C-TICK, INMETRO BR-EX IA IIC T4 PRESSURE RATING:RATING PER MANUAL C11, C12, Y15
|
Siemens
|
|
A5E03754340
|
7ML5662XXB000DD1-Z Y15,DN50, PN16,FORM B1 PROCESS CONNECTION DN50, PN16,WELDED FLANGE, 316L STAINLESS STEEL, TYPE B1 316L PROBE LENGTH EXTENDED ROD, LENGTH 500 MM (19.69) WETTED SEALS: GRAPHITE PROBE MATERIAL 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS: FLAMEPROOF ENCLOSURE WITH IS PROBE CE, C-TICK, ATEX II 1/2 G EEX D(IA) IIC T6...T4, ATEX II 1/2 D T100 C
|
Siemens
|
|
A5E03749355
|
7ML5726-1QB12-XBA4, X=1000MM PROCESS TEMPERATURE: UP TO +80 C (+176 F) POWER SUPPLY: SWITCH SELECTABLE 230V AC/115V AC/24V DC MULTIVOLTAGE, 1 REV/MIN PROCESS CONNECTION: G 1 1/2 ((BSPP), EN ISO 228-1) PROCESS PRESSURE: UP TO 0.5 BAR (7.25 PSI) PROCESS CONNECTION MATERIAL: STAINLESS STEEL 303 (1.4305) EXTENSION LENGTH:300MM(11.81) EXTENSION MATERIAL: (PROTECTION TUBE) STAINLESS STEEL 303 (1.4305) MEASURING VANE BOOT SHAPED, 35 X 106 MM (1.38 X 4.17) APPROVALS CE, C-TICK
|
Siemens
|
|
A5E03745635
|
7ML54231LAX13CA1,C11,Y15, 620MM SHIELD ANTENNA MATERIAL (USES ANTENNA ADAPTER): PTFE - USES ANTENNA ADAPTER AND ADDITIONAL PROCESS CONNECTION BELOW THREADED CONNECTION (316L STAINLESS STEEL): 1 1/2 NPT ((TAPER), ANSI/ASME B1.20.1) ANTENNA EXTENSIONS OR INACTIVE SHIELD LENGTH:620MM EXTENSION, 316L STAINLESS STEEL SHIELD PROCESS SEAL/GASKET:FKM O-RING ENCLOSURE/CABLE INLET:ALUMINUM EPOXY PAINTED, 2 X M20 X 1.5, SIEMENS LUI INTERFACE COMMUNICATION/OUTPUT:4-20MA HART,START-UP AT <,(>,<,<,)>,3.6MA APPROVAL: GENERAL PURPOSE, CE PRESSURERAT.:0.5BARMAX,C11,Y15
|
Siemens
|
|
A5E03758362
|
KIT,SPARES,WFDR PBD-51038163
|
Siemens
|
|
A5E03749639
|
7MH71021MXX0,FG,E40 BASE, DN150,XX=SPC.PT MODEL BASE MOUNT, 40 T/H MAX. DESIGN CAPACITY FLOWGUIDE SIZE DN150 FLANGE PATTERN FLOWGUIDE CONSTRUCTION MILD STEEL, POLYESTER PAINTED CABINET CONSTRUCTION MILD STEEL, POLYESTER PAINTED
|
Siemens
|
|
A5E03745816
|
CAMERA FIFE_DAC005 M349633
|
Siemens
|
|
A5E03749686
|
7ML1301-4AAX1-2AB0,Y01=35CM MODEL: COAXIAL, OVERFILL/ FLOODED CAGE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01=35CM O-RINGS:EPDM (ETHYLENE PROPYLENE RUBBER PROCESS CONNECTION (SIZE/TYPE): G 1 ((BSPP), EN ISO 226-1)
|
Siemens
|
|
A5E03308272
|
SIMATIC PC, SPARE PART, FAN FOR UNIT 50MM, NEAR PS, CV5, IPC627C, HMI IPC677C, HMI IPC577C
|
Siemens
|
|
A5E03306000
|
EVALUATION BOARD F. ERTEC 200P EB 200P, PART OF EK-ERTEC 200P INCL. POWERPLUG AND JUMPER W/O SOFTWARE W/O DOCUMENTATION
|
Siemens
|
|
A5E03313809
|
SIMATIC PC, SPARE PART DIN-RAIL, BASE, PCIE, COM, IO FOR NANOBOX IPC227D
|
Siemens
|
|
A5E03316290
|
SINVERT PVM WALL BRACKET WITHOUT ACCESSORIES
|
Siemens
|
|
A5E03756065
|
WD600,CUSTOM,7MH7185-6HA0, NO LOADCELLS BELT WIDTH 42 (1000MM) LOAD CELL CAPACITY NONE
|
Siemens
|
|
A5E03315891
|
SIMATIC PC, SPARE PART SIDE-MOUNT, BASE FOR NANOBOX IPC227D
|
Siemens
|
|
A5E03316369
|
SINVERT PVM CONNECTORS SET CONSISTS OF 1X CONNECTOR AC SMALL
|
Siemens
|
|
A5E03313811
|
SIMATIC PC, SPARE PART BOOK-MOUNT BASE FOR NANOBOX IPC227D
|
Siemens
|
|
A5E03313810
|
SIMATIC PC, SPARE PART WALL-MOUNT - BASE, COM,IO FOR NANOBOX IPC227D
|
Siemens
|
|
A5E03316370
|
SINVERT PVM AC CONNECTOR SMALL
|
Siemens
|
|
A5E03313812
|
SIMATIC PC, SPARE PART BOOK-MOUNT IPC227D,PCIE,COM,IO FOR NANOBOX IPC227D
|
Siemens
|
|
A5E03316508
|
SIMATIC PC, SPARE PART SIDE-MOUNT, PCIE FOR NANOBOX IPC227D
|
Siemens
|
|
A5E03316509
|
SIMATIC PC, SPARE PART SIDE-MOUNT, COM, IO FOR NANOBOX IPC227D
|
Siemens
|
|
A5E03315885
|
SIMATIC PC, SPARE PART WALL-MOUNT, 227D - PCIE FOR NANOBOX IPC227D
|
Siemens
|
|
A5E03763446
|
SIMATIC IPC, SPAREPART PCB ASSEMBLY, TACO BOARD FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03769348
|
WW300 10 PULLEY BEARING, 4BOLT FLG,2-7/16
|
Siemens
|
|
A5E03763511
|
SIMATIC IPC, SPAREPART PCB ASSEMBLY, CFAST-ADAPTER FOR SIMATIC IPC427D
|
Siemens
|
|
A5E03769538
|
7ML5431XXX300XB,LR250, FF,NPT,CSA/FM IS LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, NPT CABLE INLET, APPROVAL OPTION B, WITH FOUNDATION FIELDBUS COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03764379
|
WW100,7MH71801AA606AC0, ATEX WITH EXTERNAL MOTOR
|
Siemens
|
|
A5E03768320
|
7ML54310XX200CC1,XX=3 150LB RAISED FACE PROCESS CONNECTION AND ANTENNA MATERIAL 316L(1.4435OR1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL FLANGED CONNECTIONS 316L 3 CLASS150 ASME B16.5,RAISED FACE COMMUNICATION 4-20MA HART, START-UP AT <,3.6MA ENCLOSURE (WITH CABLE INLETS) ALUMINUM, EPOXY PAINT, 2 X 1/2 NPT ANTENNA 3 HORN (FITS 3 ASME OR DN 80 NOZZLES) APPROVALS: IS: IECEX/ATEX II 1 GD EX IA IIC T4, (IS BARRIER REQUIRED), R(&)TTE, C-TICK, INMETRO BR-EX IA IIC T4
|
Siemens
|
|
A5E03321626
|
VAS5052A TESTER WITHOUT BT (NO BATTERY) (CONTAINS A5E03320509)
|
Siemens
|
|
A5E03769543
|
7ML5431XXX301XEX,LR250 ,FF,M20,ATEX 3G LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, M20 CABLE INLET, APPROVAL OPTION E, WITH FOUNDATION FIELDBUS COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03327667
|
7MH7122-1DD84-1A, 90 DYNAMIC BEAM SPACE. MILLTRONICS MSI BELT SCALE A HEAVY-DUTY, HIGH-ACCURACY SINGLE IDLER BELT SCALE FOR PROCESS AND LOAD-OUT CONTROL. FOR MILLTRONICSMMI BELT SCALE SYSTEM, TWO OR MORE MSI BELT SCALES ARE REQUIRED. CALIBRATION WEIGHTS ARE REQUIRED AND ORDERED AS SEPARATE ITEMS. REFER TO CALIBRATION ACCESSORIES.
|
Siemens
|
|
A5E03321626NT
|
VAS5052A TESTER WITHOUT BT (NO BATTERY) (CONTAINS A5E03320509)
|
Siemens
|
|
A5E03321633
|
VAS5052A TESTER ROW (NO BATTERY) (CONTAINS A5E03320265)
|
Siemens
|
|
A5E03328866
|
SINAMICS G120 REPAIR PART WLX_311791 PCB-SUPPORT FSC 323X134X124
|
Siemens
|
|
A5E03327668
|
7MH72181DD671, FOR 90 DYNAMNIC BEAM MILLTRONICS MWL WEIGHT LIFTER A MECHANICAL CALIBRATION WEIGHT LIFTER FOR MSI, MMI, AND MUS BELT SCALES. FOR USE WITH MSI, ENSURE MSI FABRICATION OPTION 41 IS SELECTED.
|
Siemens
|
|
A5E03321633NT
|
VAS5052A TESTER ROW (NO BATTERY) (CONTAINS A5E03320265)
|
Siemens
|
|
A5E03322625
|
MICROBOX PC 427C SIMOCRANE, CORE 2 DUO 1,2 GHZ, 800 MHZ FSB, 3 MB SLC, PROFIBUS DP 12,, 2 GBYTE, DDR3 1066, 250 GB HDD SATA, OS WIN XP PROF, INTERFACES: 4 X USB, V2.0, 2X 10/100/1000 MBIT/S ETHERN., 1XVGA, 1XDVI-I, 1XCOM, CUSTOMER SPECIFIC: ACCESS. DP SLAVE, ACCESS. SOFTNET S7 LEAN, ACCESS. DOCU CD, CAN PCB INCL. DRIVER, RS 232 INTERFACE CARD 500 MBD
|
Siemens
|
|
A5E03325950
|
SIMATIC IPC, SPAREPART FRONT COMPL. 15 T/K WIDE USB FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03770776
|
7ML56300AAX00HA,REMOTE, HIGH TEMP CABLE PROCESS CONNECTION THREADED, 316L STAINLESS STEEL, 3/4 NPT ((TAPER), ANSI/ASME B1.20.1) PROBE LENGTH COMPACT (THREADED 120 MM (4.72), FLANGED 98 MM (3.86)) REMOTE MOUNT ELECTRONICS AND MOUNTING BRACKET: 5M (197) OF CABLE WETTED SEALS FKM PROBE MATERIAL 316L SS WITH PPS PROBE BODY APPROVALS: GP (CSA, FM) ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X 1/2 NPT VIA ADAPTER - CABLE INLET, IP65
|
Siemens
|
|
A5E03777032
|
SIMATIC PC, SPARE PART FRONT PLATE PRINTED FOR IPC427D
|
Siemens
|
|
A5E03770783
|
7ML55133EF122AA1,C11,C12, NACE,PRES CERT CABLE, PFA INSULATED, WEIGHTED Y01-8000MM,Y02-350MM PROCESS CONNECTION 6, ASME, 150 IB APPROVALS: CSA/FM CLASS I, DIV. 2, GROUPS A, B, C, D T4, ATEX II 3G 2D EEXN A(IB)IIC T6 TO T4 T100 ENCLOSURE/CABLE INLET ALUMINUM EPOXY COATED, 2 X M20 X 1.5 (IP68,ADAPTER) OPTIONS: NO OPTIONS THERMAL ISOLATOR/REMOTE VERSION WITHOUT THERMAL ISOLATOR OR REMOTE ELECTRONICS ELECTRONIC OUTPUT 2-WIRE LOOP CURRENT 4 TO 20MA
|
Siemens
|
|
A5E03780554
|
FUSE 10X38 10A 1000V DC PACKAGE SIZE 10PCS
|
Siemens
|
|
A5E03780536
|
FUSE 10X38 20A 1000VDC PACKAGE SIZE 10PCS
|
Siemens
|
|
A5E03783638
|
7MH71460DA,WELDED CAP CABLE LENGTH STANDARD LENGTH (AS DESCRIBED IN MODEL OPTIONS) MODEL MSP-9, 5 M HIGH TEMPERATURE CABLE STANDARD APPROVALS CE
|
Siemens
|
|
A5E03786216
|
7MH75601XA01,X=10M SITRANS AS 100 ACOUSTIC SENSOR WITH 10M CABLE
|
Siemens
|
|
A5E03780545
|
FUSE 10X38 15A 1000VDC PACKAGE SIZE 10PCS
|
Siemens
|
|
A5E03784424
|
RENAULT SCUBE, 4 SHOCK ABSORBER WITH AN ASSEMBLY INSTRUCTION SHEET NOTE : FOR MOP WITH CABINETEXTENSION YOU NEED 8 SHOCK ABSORBERS
|
Siemens
|
|
A5E03347540
|
PREAMPLIFIER O2-DUMBBELL
|
Siemens
|
|
A5E03347991
|
SIMATIC IPC SPARE PART, SERIELLE(COM2)-SCHNITTSTELLE FOR SIMATIC RACK IPC547D, IPC547E
|
Siemens
|
|
A5E03340193
|
KIT, EMITTER FOR LR400,PTFE, FKM,GP,NP
|
Siemens
|
|
A5E03347537
|
PARAMAGN. MEASURING CELL (DUMBBELL)
|
Siemens
|
|
A5E03347992
|
SIMATIC IPC SPARE PART, PARALLEL(LPT)-INTERFACE FOR SIMATIC RACK IPC547D, IPC547E
|
Siemens
|
|
A5E03790216
|
POWER PLUG WITH SAFETY CATCH
|
Siemens
|
|
A5E03792459
|
GASKET SET, FOR DIAPHRAGM GAS SUPPLY PUMP KNF
|
Siemens
|
|
A5E03354392
|
BATTERY BACK UP FOR MAINS POWER SUPPLY 1 PC D-CELL (3.6 V, 16.5 AH).
|
Siemens
|
|
A5E03790218
|
CABLE TIE, HIGH-TEMPERATURE, FOR CABLE FASTENING
|
Siemens
|
|
A5E03352442
|
SINAMICS POWERBLOCK REPAIR PART ZK-VERSCHIENUNG FS-J DC/AC 400V (4MM)
|
Siemens
|
|
A5E03352658
|
MOTOR,AC,ABB,0.37KW,415/3/50, 1500,IEC90
|
Siemens
|
|
A5E03355498
|
SITRANS VP300, 6DR63... COMPACT OPERATING INSTRUCTIONS: ENGLISH, FRENCH, GERMAN, SPANISH, ITALIAN, DUTCH
|
Siemens
|
|
A5E03355513
|
SITRANS VP300, 6DR63... COMPACT OPERATING INSTRUCTIONS: ENGLISH, ESTONIAN, LATVIAN, LITHUANIAN, POLISH, ROMANIAN
|
Siemens
|
|
A5E03357409
|
SINAMICS PWB REPAIR PART DC LINK BUSBAR SET DC/AC 690V
|
Siemens
|
|
A5E03359515
|
SITRANS VP300, 6DR63... COMPACT OPERATING INSTRUCTIONS: ENGLISH, BULGARIAN, CZECH, FINNISH, SLOVAKIAN, SLOVENIAN
|
Siemens
|
|
A5E03357834
|
SINAMICS POWERBLOCK REPAIR PART DC LINK BAR FS-J 690V (2,5MM)
|
Siemens
|
|
A5E03359529
|
SITRANS VP300, 6DR63... COMPACT OPERATING INSTRUCTIONS: ENGLISH, DANISH, GREEK, PORTUGUESE, SWEDISH, HUNGARIAN
|
Siemens
|
|
A5E03801744
|
SITRANS FC430 SIL PRODUCT INFORMATION EN
|
Siemens
|
|
A5E03808137
|
SIMATIC IPC, SPAREPART USB CABLE FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03356339
|
MILLTRONICS BW500 A FULL-FEATURE, POWERFUL INTEGRATOR DESIGNED FOR USE WITH BOTH BELT SCALES AND WEIGHFEEDERS
|
Siemens
|
|
A5E03802723
|
7MH71121HAX1 SENSING HEAD WITH SPECIAL PAINT: CLASSIFICATION: NON-HAZARDOUS RANGE(RANGE SPRING SIZE/ VISCOSITY OF DAMPINGFLUID:D3/ 3000 POSITION 2 GASKETING: SILICONE COATING:PRIMER-CARBOLINE 893SG ZINC PHOSPHATE INTERMEDIATE COAT-CARBOMASTIC 615 MICACEOUS IRON OXIDE TOP COAT-CARBOTHANE 133HB ACRYLIC POLYESTER (METALLIC) SENSING HEAD MOUNTED LVDT CONDITIONER:INTERNAL SENSING HEAD MOUNT COAT ALL ALUMINA PARTS AND OUTSIDE FRAME, ETC IN SPECIAL COATING
|
Siemens
|
|
A5E03802692
|
7MH71100MAX1 SENSING HEAD W/ SPEC PAINT: MOUNTING: BASE RANGE(RANGE SPRING SIZE/LEAF SPRING THICKNESS /VISCOSITY OF DAMPING FLUID):C13/A3/5000 GASKETING: SILICONE COATING:PRIMER-CARBOLINE 893SG ZINC PHOSPHATE INTERMEDIATE COAT-CARBOMASTIC 615 MICACEOUS IRON OXIDE TOP COAT-CARBOTHANE 133HB ACRYLIC POLYESTER (METALLIC) SENSING HEAD MOUNTED LVDT CONDITIONER:REQUIRED FOR USE WITH SF500 OR SIWAREX FTC INTEGRATOR COAT ALL ALUMINA PARTS AND OUTSIDE FRAME, ETC IN SPECIAL COATING
|
Siemens
|
|
A5E03802722
|
7MH71121PAX1 SENSING HEAD WITH SPECIAL PAINT: CLASSIFICATION: NON-HAZARDOUS RANGE (RANGE SPRING SIZE/ VISCOSITY OF DAMPING FLUID: D5/5000 POSITION2 GASKETING: SILICONE COATING:COATING PRIMER- CARBOLINE 893SG ZINC PHOSPHATE INTERMEDIATE COAT-CARBOMASTIC 615 MICACEOUS IRON OXIDE TOP COAT - CARBOTHANE 133HB ACRYLIC POLYESTER (METALLIC) SENSING HEAD MOUNTED LVDT CONDITIONER: INTERNAL SENSING HEAD MOUNT COAT ALL ALUMINA PARTS AND OUTSIDE FRAME, ETC IN SPECIAL COATING
|
Siemens
|
|
A5E03807091
|
7ML56525GB000DCX, Y01-500,Y02-380 PROCESS CONNECTION WELDED FLANGE, 316L STAINLESS STEEL, RAISED FACE,2 ASME, 150 LB PROBE LENGTH EXTENDED ROD, LENGTH 500 MM (19.69) WETTED SEALS GRAPHITE PROBE MATERIAL 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS FLAMEPROOF ENCLOSURE WITH IS PROBE:CE, C-TICK, ATEX II 1/2 G EEX D(IA) IIC T6...T1, ATEX II 1/2 D T100 C ENCLOSURE AND LID ALUMINUM EPOXY COATED 2X1/2NPT VIA ADAPTER - CABLE INLET, IP68 ACTIVE SHIELD LENGTH EXTENDED SHIELD - 380 MM
|
Siemens
|
|
A5E03802718
|
7MH71100LAX1 SENSING HEAD W/SPEC PAINT: MOUNTING: BASE RANGE (RANGE SPRING SIZE/LEAF SPRING THICKNESS/VISCOSITY OF DAMPING FLUID):C13/A3/5000 GASKETING SILICONE COATING: PRIMER-CARBOLINE 893SG ZINC PHOSPHATE INTERMEDIATE COAT-CARBOMASTIC 615 MICACEOUS OXIDE TOP COAT - CARBOTHANE 133HB ACRYLIC POLYESTER (METALLIC) SENSING HEAD MOUNTED LVDT CONDITIONER:REQUIRED FOR USE WITH SF500 OR SIWAREX FTC INTEGRATOR COAT ALL ALUMINA PARTS AND OUTSIDE FRAME, ETC IN SPECIAL COATING
|
Siemens
|
|
A5E03364317
|
SIMATIC NET PB SOFTNET DP SLAVE ED. 2008 SW FOR PROFIBUS DP INCL. FDL WITH OPC-SERVER AND NCM-PC UP TO 8 CONNECTIONS R-SW, ONLY COL, W/O CD AND W/O DOCU, CLASS A, 2-LANGUAGE (G, E) F. WINDOWS (32BIT) XP PRO+SP1-3 VISTA BUSINESS, ULTIMATE WINDOWS 2003/2008 SERVER FOR CP5512 / CP5611 / CP611A2/ CP5621/CP5711
|
Siemens
|
|
A5E03369912
|
SINAMICS G120 REPAIR PART WLX_312869 CU CARD PROFINET V-2 180X100X50
|
Siemens
|
|
A5E03361511
|
SITRANS FC430 OP INSTR EN
|
Siemens
|
|
A5E03362966
|
SIMATIC PG, SPARE PART, SHRINK TUBING WLAN ANTENNA CABLE FOR FIELD PG M4
|
Siemens
|
|
A5E03363348
|
SINVERT PVM CONTROLBOX WALLMOUNTING DEVICE
|
Siemens
|
|
A5E03364511
|
7ML11061XA200A, X=70M PROCESS CONNECTION: 1 NPT ((TAPER), ANSI/ASME B1.20.1) CABLE LENGTH: X = 70 METERS FACING: STANDARD (CSM RUBBER) APPROVALS: FM CLASS I, ATEX II 2G, CSA CLASS I DIV. 2, SAA CLASS I MOUNTING FLANGE: NONE
|
Siemens
|
|
A5E03369914
|
SINAMICS G120 REPAIR PART WLX_312870 IO CARD PROFINET V-2 180X100X50
|
Siemens
|
|
A5E03365233
|
SINAMICS G120 REPAIR PART WLX_311723 PCB SUPPORT TRAY FSA 170X75X115
|
Siemens
|
|
A5E03818963
|
7ML52212AA11,Y15, CERTIFICATES ENCLOSURE / CABLE INLET: PLASTIC (PBT), 2 X 1/2 NPT (NO CABLE GLANDS SUPPLIED) RANGE/TRANSDUCER MATERIAL: 6 METER (20 FT), ETFE PROCESS CONNECTION: 2 NPT ((TAPER), ANSI/ASME B1.20.1) COMMUNICATION / OUTPUT: 4-20 MA, HART APPROVAL: GENERAL PURPOSE, FM, CSA, CE STAINLESS STEEL TAG (69 X 50 MM (2.71 X 1.97)): MEASURING-POINT NUMBER / IDENTIFICATION (MAX. 27 CHARACTERS) SPECIFY IN PLAIN TEX
|
Siemens
|
|
A5E03818057
|
POINTEK CLS300 - HIGH TEMP ROD VERSION WITH STANDARD OUTPUT MLFB: 7ML56525HX000DC0, Y01-230 PROCESS CONNECTION WELDED FLANGE, 316L STAINLESS STEEL, RAISED FACE, 2 PROBE LENGTH Y01-230MM WETTED SEALS GRAPHITE PROBE MATERIAL 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS FLAMEPROOF ENCLOSURE WITH IS PROBE:CE, C-TICK, ATEX II 1/2 G EII 1/2 D T100 C ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X 1/2 NPT VIA ADAPTER - CABLE ACTIVE SHIELD LENGTH STANDARD LENGTH -105 MM CERTIFICATES MATERIAL EN 10204, 3.1
|
Siemens
|
|
A5E03372626
|
SINVERT PVM CONTROLBOX POWERSUPPLY
|
Siemens
|
|
A5E03375640V
|
HDD ISID 250 GB (CONTAINS A5E03375258)
|
Siemens
|
|
A5E03376501
|
SITRANS F M MAG 5100 W OP INSTR CN
|
Siemens
|
|
A5E03374526V
|
MOTHERBOARD VAS 5052A WITH ACCESSORIES 4GB
|
Siemens
|
|
A5E03376521
|
SITRANS F M MAG 5100 W OP INSTR FR
|
Siemens
|
|
A5E03376527
|
SITRANS F M MAG 5100 W OP INSTR DE
|
Siemens
|
|
A5E03375640
|
HDD ISID 250 GB (CONTAINS A5E03375258)
|
Siemens
|
|
A5E03376529
|
SITRANS F M MAG 5100 W OP INSTR ES
|
Siemens
|
|
A5E03820857
|
7ML54270XA000AE1,2 R,316L,FKM,C11,Y15 PROCESS CONNECTION: R 2 ((BSPT), EN 10226-1) (TAPERED THREAD), 316L ANTENNA:2 HORN ANTENNA,316L PURGE (SELF CLEANING) CONNECTION:NO PURGE CONNECTION OUTPUT/COMMUNICATION: 4 TO 20 MA, HART CABLE INLET:2XM20X1.5 AREA CLASSIFICATION: INTRINSICALLY SAFE,IECEX/ATEX II 1 GD EX IA IIC T4, EX TD A20 IP67 T90C, R&TTE, C-TICK, INMETRO PRESSURE RATING: 0.5 BAR (7.25 PSI) MAXIMUM C11, Y15
|
Siemens
|
|
A5E03827225
|
SIMATIC IPC, SPAREPART PS CABLE FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03825511
|
SIMATIC PC, SPARE PART, MAINBOARD IPC277D, 1.0 GHZ,1 GB RAM, REM, NEW COOL
|
Siemens
|
|
A5E03825512
|
SIMATIC PC, SPARE PART, MAINBOARD IPC277D, 1.0 GHZ, 1 GB RAM, NEW COOLER
|
Siemens
|
|
A5E03825596
|
7MH71121LAX1 SENSING HEADW/SPEC PAINT, X=CARB. 893SG ZINC PHOS. PRIMER,CARB.615 M.I.O,CARB. CARB.133HB: CLASSIFICATION: NON-HAZARDOUS RANGE (RANGE SPRING SIZE/ VISCOSITY OF DAMPING FLUID): D4/5000 POSITION 2 GASKETING: SILICONE COATING: PRIMER-CARBOLINE 893SG ZINC PHOSPHATE INTERMEDIATE COAT-CARBOMASTIC 615 MICACEOUS IRON OXIDE TOP COAT-CARBOTHANE 133HB ACRYLIC POLYESTER (METALLIC) SENSING HEAD MOUNTED LVDT CONDITIONER:INTERNAL SENSING HEAD MOUNT (FOR USE WITH SF 500 AND CLASSIFICATION OPTION1)
|
Siemens
|
|
A5E03829069
|
AS100,7MH75601XA03,X=10M CABLE SENSOR STANDARD TEMPERATURE RANGE (-20 C TO +80 C) CABLE LENGTH X=10M SENSOR MOUNTING NONE APPROVALS FM/CSA CLASS II DIV. 1, GROUPS E, F AND G, COMES WITH 1/2 NPT FEMALE ADAPTOR
|
Siemens
|
|
A5E03455540
|
TERMINAL ACCSY INLAYBRIDGE EB_2-25/UKH
|
Siemens
|
|
A5E03457148
|
CUD SMC/FLASHED WITH FIRMWARE WITHOUT PARAMETERS
|
Siemens
|
|
A5E03455561
|
TERMINAL ANREIH TRAG 57A_750V_AGK/10/UKH95
|
Siemens
|
|
A5E03457153
|
BGR SONST INTERFACE CONVERTER I-7510
|
Siemens
|
|
A5E03455564
|
STECK_RCK_BUCHSE_5P GER-1R_SCHRAUB_5.08M
|
Siemens
|
|
A5E03457166
|
RESTRICTOR 135UH 490A 400V
|
Siemens
|
|
A5E03457155
|
TRANSFORMER DT 264V 400V 35KVA
|
Siemens
|
|
A5E03455632
|
CONNECTOR RCK FEMALE PIN-/JACK 10P GER
|
Siemens
|
|
A5E03457164
|
GER SONST IISDN I MODEM
|
Siemens
|
|
A5E03455668
|
CUSTOM-RUBBERLEADCABLE 1,8/3KV NSGAFOEU
|
Siemens
|
|
A5E03455672
|
RAIL TERMINAL MODULE 210A 726V
|
Siemens
|
|
A5E03455729
|
CABLE RADOX 4GKW-AX 1,5QMM
|
Siemens
|
|
A5E03455731
|
DEHN VM500 900 421 VARISTOR
|
Siemens
|
|
A5E03457178
|
GER SONST TK-EQUIPMENT COMPACT 4410 USB
|
Siemens
|
|
A5E03455748
|
SHUNT WITH ISOSOCKET AND PROTECTIONCAP NW 60MV KL.0,5/100A
|
Siemens
|
|
A5E03457181
|
POWER SUPPLY ASSEMBLY PSU2
|
Siemens
|
|
A5E03455738
|
WEIGEL SHUNT CONFIG.A 100A/60MV
|
Siemens
|
|
A5E03457184
|
DEV PROTECTION BLITZDUCTOR BCT MLC BD HF 5
|
Siemens
|
|
A5E03455742
|
CONNECTOR RCK FEMALE JACK 4P GER SCHRAUB
|
Siemens
|
|
A5E03455745
|
CONNECTOR RCK MALE JACK 9P GER SCHRAUB
|
Siemens
|
|
A5E03459194
|
CAPACITOR 115U -5:+10% 440V POLYPROPYLE
|
Siemens
|
|
A5E03455750
|
SHUNT_WITH_ISOSOCKET 60MV KL.05/250A
|
Siemens
|
|
A5E03459373
|
CONTACTOR CHANGE 3TC5617-0BP0 AC 220V
|
Siemens
|
|
A5E03459198
|
CAPACITOR 138U -5:+10% 480V POLYPROPYLE
|
Siemens
|
|
A5E03459207
|
TRANSFORMER DT 1.250KVA
|
Siemens
|
|
A5E03455753
|
AXIALFAN_W2E200 AC_230V_2550U/MIN
|
Siemens
|
|
A5E03459375
|
ELECTRIC SHUNT 100MV 400A
|
Siemens
|
|
A5E03455762
|
EOS VARISTOR TYPE B32K385 VAC 385, 25000A, 1400PF
|
Siemens
|
|
A5E03455767
|
WEB-LOG MODULE ANALOG
|
Siemens
|
|
A5E03455765
|
GER_SONST_MINIWEBSERVER
|
Siemens
|
|
A5E03459376
|
TRANSFORMER DT 1.6000KVA
|
Siemens
|
|
A5E03459394
|
GER SONST WEB-LOG PRO ANALOG
|
Siemens
|
|
A5E03455768
|
SENSOR THERMAL PT100 TEMPERATURESENSOR
|
Siemens
|
|
A5E03459414
|
GER SONST WEB-LOG PRO GSM
|
Siemens
|
|
A5E03459398
|
GER SONST WEB-LOG PRO ISDN
|
Siemens
|
|
A5E03456287
|
CABLE RUBBERLEAD NSGAFOEU 185QMM_SW
|
Siemens
|
|
A5E03456290
|
SENSOR THERMAL AGS54 OPTION WEB-LOG
|
Siemens
|
|
A5E03459460
|
ISOLATING AMPLIFIER TV-H-U
|
Siemens
|
|
A5E03456301
|
TRAFO DT 288V 400V 17.5KW
|
Siemens
|
|
A5E03459461
|
TRANSFORMER DT 2.000KVA
|
Siemens
|
|
A5E03456416
|
TRAFO DT 288V_400V_87KW
|
Siemens
|
|
A5E03459462
|
TRANSFORMER DT 2KVA
|
Siemens
|
|
A5E03456414
|
TRAFO DT 288V_400V_52.5KW
|
Siemens
|
|
A5E03459465
|
DEV OTHER SIGNAL CONVERTER TEMPERATURE SIG
|
Siemens
|
|
A5E03459463
|
OVERVOLTAGE DIVERTER DGT385FM
|
Siemens
|
|
A5E03456423
|
DEVICE CONTROL FAX_ALARM_1-4
|
Siemens
|
|
A5E03456426
|
CABLE_ROUND_CUSTOM CABLE_1_SINVERT_SOLAR_5M
|
Siemens
|
|
A5E03459479
|
THREE PHASE CAST RESIN TRANSFORMER 1250 KVA
|
Siemens
|
|
A5E03456429
|
CABLE_ROUND_CUSTOM CABLE_3_SINVERT_SOLAR_5M
|
Siemens
|
|
A5E03459484
|
CAPACITOR MKP 1U2 +-5% 1.2KV
|
Siemens
|
|
A5E03456434
|
BOARD CONTROL SWITCHCONTROL_UPS
|
Siemens
|
|
A5E03459491
|
INTERFERENCE FILTER BOARD 10 KVA-S
|
Siemens
|
|
A5E03456432
|
FUSE 50A_700V
|
Siemens
|
|
A5E03459500
|
ZUB SAFETY SWITCH AUXILLARY CONTACT TYP S800
|
Siemens
|
|
A5E03459494
|
OVERCURRENT SWITCH S803S-B10 10A 415V
|
Siemens
|
|
A5E03456467
|
BOARD_CONTROL INVERTER_USI
|
Siemens
|
|
A5E03456471
|
RADIO DEJAM FILTER 6SA8252-0DA48
|
Siemens
|
|
A5E03459508
|
WID_VAR_POT_DRA_2K2_300W
|
Siemens
|
|
A5E03456474
|
RADIO DEJAM FILTER 6SA8252-0AD45
|
Siemens
|
|
A5E03459510
|
FILTER NOT RADIO 100V 20A
|
Siemens
|
|
A5E03456477
|
OVER-VOLTAGE PROTECTION 600V
|
Siemens
|
|
A5E03459520
|
FILTER NOT RADIO 100V 20A
|
Siemens
|
|
A5E03459531
|
TRANSFORMER DT 630KVA
|
Siemens
|
|
A5E03456491
|
COMMUNICATION BOARD CBP2_G9X
|
Siemens
|
|
A5E03459538
|
TRANSFORMER DT 400KVA
|
Siemens
|
|
A5E03456495
|
FERRITE_RING N30_5.4MH
|
Siemens
|
|
A5E03459541
|
TRANSFORMER DT 800KVA
|
Siemens
|
|
A5E03459554
|
FUSE 16A 1KV
|
Siemens
|
|
A5E03456500
|
SHUNT 60MV KL.05/400A
|
Siemens
|
|
A5E03459559
|
OVERVOLTAGE DIVERTER 3EK7270
|
Siemens
|
|
A5E03459549
|
GER SAFETY DEHN VALVE DV M TNC 255FM
|
Siemens
|
|
A5E03456507
|
SHUNT_WITH_ISOSOCKET 60MV KL.05/600A
|
Siemens
|
|
A5E03456537
|
SHUNT_WITH_ISOSOCKET 60MV KL.05/250A
|
Siemens
|
|
A5E03456565
|
SWITCH_DC 24V-220V
|
Siemens
|
|
A5E03459563
|
FILTER SPARK SUPPRESSION 900VDC 2A
|
Siemens
|
|
A5E03456580
|
TRAFO_DT 225V_400V_87KW
|
Siemens
|
|
A5E03459566
|
CAPACITOR MKP 2U5 +-5% 400V
|
Siemens
|
|
A5E03459567
|
SNUBBER RESISTOR HPP 2X3K3 106W 5%
|
Siemens
|
|
A5E03456585
|
SHUNT_WITH_ISOSOCKET_200A
|
Siemens
|
|
A5E03459568
|
CAPASITOR 32U -5:+10% 525V POLYPROPYLENE
|
Siemens
|
|
A5E03456589
|
GER_SIMOVERT_USV_100_KVA
|
Siemens
|
|
A5E03456591
|
ISDN-FRITZ!CARDPCIV2.0
|
Siemens
|
|
A5E03459569
|
CURRENT TRANSFORMER KIT 200A/200MA
|
Siemens
|
|
A5E03456594
|
CONTROLPANEL_F_USV
|
Siemens
|
|
A5E03459571
|
INDUCTOR ALU THREE PHASE, AC 0,265MH, 210A,
|
Siemens
|
|
A5E03456597
|
LOAD DISCONNECTOR F_14X51_SICH
|
Siemens
|
|
A5E03459572
|
ISDN UNIT COMPACT 2204USB
|
Siemens
|
|
A5E03456598
|
OVERVOLTAGE PROTECTOR 255V DGP C T 255
|
Siemens
|
|
A5E03459577
|
TRANSFORMER DT 288V 400V 1.25KVA
|
Siemens
|
|
A5E03456851
|
SWITCH OVERCURRENT 40A
|
Siemens
|
|
A5E03459578
|
SOLAR OPT METEOROLOGICAL STATION JUNCTION BOX
|
Siemens
|
|
A5E03456854
|
SHUNT 60MV/800A_KL.0.5
|
Siemens
|
|
A5E03456859
|
SHUNT 60MV KL.05/1000A
|
Siemens
|
|
A5E03459579
|
GER SONST WEB-LOG PRO DSL
|
Siemens
|
|
A5E03456861
|
SHUNT 5A 300MV
|
Siemens
|
|
A5E03459583
|
OVERVOLTAGE DIVERTER 600V 15KA
|
Siemens
|
|
A5E03459584
|
VOLTAGE CONVERTER EI60
|
Siemens
|
|
A5E03459589
|
MS-TRANSFORMER 1600KV 15/20KV
|
Siemens
|
|
A5E03456862
|
MEASURING CONVERTER TYPVUD2.2
|
Siemens
|
|
A5E03383665
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CORE I3 2.13 GHZ, PROFIBUS, IPC627C, IPC827C, HMI IPC677C,
|
Siemens
|
|
A5E03456865
|
DC SWITCH SEC10-10-01-0-1-0
|
Siemens
|
|
A5E03383574
|
SIMATIC PC, SPARE PART, MOTHERBOARD W/O FIELDBUS, CORE I3-330E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03383575
|
SIMATIC PC, SPARE PART, MOTHERBOARD WITH PROFIBUS, CORE I3-330E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03383666
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CORE I3 2.13 GHZ, PROFINET, IPC627C, IPC827C, HMI IPC677C,
|
Siemens
|
|
A5E03383670
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CORE I7 2.53 GHZ, IPC627C, IPC827C, HMI IPC677C,
|
Siemens
|
|
A5E03383576
|
SIMATIC PC, SPARE PART, MOTHERBOARD WITH PROFINET, CORE I3-330E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03383578
|
SIMATIC PC, SPARE PART, MOTHERBOARD WITH PROFIBUS, CORE I5-520E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03383671
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CORE I7 2.53 GHZ, PROFIBUS, IPC627C, IPC827C, HMI IPC677C,
|
Siemens
|
|
A5E03383577
|
SIMATIC PC, SPARE PART, MOTHERBOARD W/O FIELDBUS, CORE I5-520E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03383580
|
SIMATIC PC, SPARE PART, MOTHERBOARD WITHOUT FIELDBUS, CORE I7-610E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03383672
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CORE I7 2.53 GHZ, PROFINET, IPC627C, IPC827C, HMI IPC677C,
|
Siemens
|
|
A5E03383579
|
SIMATIC PC, SPARE PART, MOTHERBOARD WITH PROFINET, CORE I5-520E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03383581
|
SIMATIC PC, SPARE PART, MOTHERBOARD WITH PROFIBUS, CORE I7-610E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03385485
|
SIMATIC PC, SPARE PART REPLACEMENTFRONT 15 WIDE TOUCH FOR SIMATIC PANEL PC IPC277D
|
Siemens
|
|
A5E03385897
|
SINAMICS G120 REPAIR PART WLX_312467 MAIN COVER FSC 322X122X140
|
Siemens
|
|
A5E03383582
|
SIMATIC PC, SPARE PART, MOTHERBOARD WITH PROFINET, CORE I7-610E, FOR SIMATIC RACK PC: IPC647C, IPC847C CAUTION: THE MOTHERBOARD CAN ONLY BE USED AFTER THE DEVICES WERE ASSIGNED IN AN AUTHORIZED REPAIR CENTER, I.E., THE MOTHERBOARD MUST HAVE KNOWLEDGE OF THE VARIOUS DEVICES (BIOS INITIALIZING9
|
Siemens
|
|
A5E03383662
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CELERON 1.86 GHZ, PROFIBUS, IPC627C, IPC827C, HMI IPC677C,
|
Siemens
|
|
A5E03383661
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CELERON 1.86 GHZ, IPC627C, IPC827C, HMI IPC677C
|
Siemens
|
|
A5E03388055
|
FIFE_DP-30 - M348214/211332-001
|
Siemens
|
|
A5E03383663
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CELERON 1.86 GHZ, PROFINET, IPC627C, IPC827C, HMI IPC677C,
|
Siemens
|
|
A5E03383664
|
SIMATIC PC, SPARE PART, MAINBOARD CV5 CORE I3 2.13 GHZ, IPC627C, IPC827C, HMI IPC677C,
|
Siemens
|
|
A5E03388800
|
7MH7122-1BK51-1A UPGD STC BASE MOUNT AND IDLER MOUNT. SCALE CONSTRUCTION: STANDARD DUTY BELT WIDTH AND A DIMENSION: 48, A= 57 LOAD CELL CAPACITY: 750 LBS FABRICATION: POLYESTER PAINTED MILD STEEL SYSTEM SPECIFICATION STANDARD MSI AND MMI
|
Siemens
|
|
A5E03830623
|
ACCESSORY SITRANS FCS400 HEATING JACKET DN15 ELECTRIC
|
Siemens
|
|
A5E03835128
|
SITRANS PROBE LU 7ML52211BA11, TEST CERT.,C11 ENCLOSURE / CABLE INLET: PLASTIC (PBT), 2 X M20X1.5 (CHECK APPROVALS FOR CABLE GLAND DETAILS) RANGE:6 METER (20 FT), PVDF COPOLYMER PROCESS CONNECTION 2 NPT ((TAPER), ANSI/ASME B1.20.1) COMMUNICATION / OUTPUT 4-20 MA, HART, APPROVAL GENERAL PURPOSE, FM, CSA, CE
|
Siemens
|
|
A5E03830624
|
ACCESSORY SITRANS FCS400 HEATING JACKET DN25 ELECTRIC
|
Siemens
|
|
A5E03830626
|
ACCESSORY SITRANS FCS400 HEATING JACKET DN80 ELECTRIC
|
Siemens
|
|
A5E03830625
|
ACCESSORY SITRANS FCS400 HEATING JACKET DN50 ELECTRIC
|
Siemens
|
|
A5E03835221
|
7ML54400XB000AA2, NO FLANGE MEASUREMENT AND PROCESS TEMPERATURE RANGE: 40M (131 FT) MAX RANGE, -40 C TO +100 C PROCESS CONNECTION: NO FLANGE - M90 X 2 MOUNTING THREAD ENCLOSURE (WITH CABLE INLET): STAINLESS STEEL, 1 X M20 X 1.5 (PLASTIC GLAND INCLUDED) PRESSURE RATING: 0.5 BAR G (7.5 PSI G) MAXIMUM OUTPUT/COMMUNICATION: 4 TO 20 MA, HART APPROVALS: GP, CSA US/C, INDUSTRY CANADA, FCC, CE, R&TTE, C-TICK LOCAL DISPLAY INTERFACE: WITH LDI (LOCAL DISPLAY INTERFACE)
|
Siemens
|
|
A5E03835763
|
SIMATIC PG, SPARE PART, INDICATOR BOARD FOR FIELD PG M4
|
Siemens
|
|
A5E03838469
|
7ML54311CAX13CA0,Y15, X=500MM SS SHIELD ANTENNA MATERIAL (USES ANTENNA ADAPTER) PTFE - USES ANTENNA ADAPTER AND ADDITIONAL PROCESS CONNECTION BELOW FLAT FACED FLANGES (316L STAINLESS STEEL)DN 100 PN 16, TYPE A,FLAT FACED ANTENNA EXTENSIONS OR INACTIVE SHIELD LENGTH:500MM EXTENSION,316L SS SHIELD PROCESS SEAL/GASKET:FKM O-RING ENCLOSURE/CABLE INLET: ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5, SIEMENS LUI COMMUNICATION/OUTPUT: 4-20MA HART,START-UP AT<,3.6MA APPROVAL: GP, CE
|
Siemens
|
|
A5E03838470
|
7ML54311CAX13CE0,Y15, X=500MM SS SHIELD ANTENNA MATERIAL (USES ANTENNA ADAPTER) PTFE - USES ANTENNA ADAPTER AND ADDITIONAL PROCESS CONNECTION BELOW FLAT FACED FLANGES (316L STAINLESS STEEL)DN 100 PN 16, TYPE A,FLAT FACED ANTENNA EXTENSIONS OR INACTIVE SHIELD LENGTH:500MM EXTENSION,316L SS SHIELD PROCESS SEAL/GASKET:FKM O-RING ENCLOSURE/CABLE INLET: ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5, SIEMENS LUI COMMUNICATION/OUTPUT: 4-20MA HART,START-UP AT<,3.6MA APPROVAL:ATEX II 1 G EEX IA
|
Siemens
|
|
A5E03838471
|
7ML54311CAX13CG0,Y15, X=500MM SS SHIELD ANTENNA MATERIAL (USES ANTENNA ADAPTER) PTFE - USES ANTENNA ADAPTER AND ADDITIONAL PROCESS CONNECTION BELOW FLAT FACED FLANGES (316L STAINLESS STEEL)DN 100 PN 16, TYPE A,FLAT FACED ANTENNA EXTENSIONS OR INACTIVE SHIELD LENGTH:500MM EXTENSION,316L SS SHIELD PROCESS SEAL/GASKET:FKM O-RING ENCLOSURE/CABLE INLET: ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5, SIEMENS LUI COMMUNICATION/OUTPUT: 4-20MA HART,START-UP AT<,3.6MA APPROVAL:ATEX II 1/2 G EEX EM
|
Siemens
|
|
A5E03832555
|
BELT,87-1/2X12-1/2,HI-TEMP, FDA,WW100
|
Siemens
|
|
A5E03839193
|
ACCESSORY SITRANS FCS400 HEATING JACKET CONTROLLER 230 VAC
|
Siemens
|
|
A5E03832658
|
7ML56615NA100HBX,150LB RF FLANGE, X = Y02 = 500MM WELDED FLANGE, 316L STAINLESS STEEL,RAISED FACE 4ASME,150LB LENGTH: EXTENDED CABLE, 3000 MM (118.11) THERMAL ISOLATOR WITH THERMAL ISOLATOR (FOR PROCESS CONNECTION TEMPERATURES OVER +85C (+185F)) WETTED SEALS FKM PROBE MATERIAL BARE 316L STAINLESS STEEL CABLE, PEEK ISOLATORS AND 316L STAINLESS STEEL CABLE WEIGHT APPROVALS: GP (CSA, FM) ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65 ACTIVE SHIELD LENGTH Y02=500MM
|
Siemens
|
|
A5E03833925
|
7ML13012XE223CA0,X=MONEL, MODEL:COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: MONEL ADD ORDER CODE Y01 AND PLAIN TEXT: INSERTION LENGTH CM Y01=TBD O-RINGS NONE PROCESS CONNECTION: (SIZE/TYPE) 1-1/2 300 LB ASME RAISED FACE FLANGE FURTHER DESIGNS: PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S). Y01=TBD Y15=TBD
|
Siemens
|
|
A5E03839290
|
7ML54270XL000AE1,DN100PN10 A, 316L,FKM PROCESS CONNECTION: DN 100 PN10/16 EN 1092-1 TYPE A, FLAT FACED, 316L,FKM SEAL ANTENNA: 4 HORN ANTENNA, FITS 100 MM OR 4 NOZZLES PURGE(SELF CLEANING)CONNECTION NO PURGE CONNECTION OUTPUT / COMMUNICATION: 4 TO 20 MA, HART CABLE INLET 2 X M20 X 1.5 AREA CLASSIFICATION INTRINSICALLY SAFE, IECEX/ATEX II 1 GD EX IA IIC T4, EX TD A20 IP67 T90C, R&TTE, C-TICK, INMETRO PRESSURE RATING 0.5 BAR (7.25 PSI) MAXIMUM
|
Siemens
|
|
A5E03391211001
|
MAXUM SSSI SIEMENS I2C BUS INTERFACE ASSEMBLY PART CONDULET TOP CABLE TERMINATION BOX
|
Siemens
|
|
A5E03839194
|
ACCESSORY SITRANS FCS400 HEATING JACKET CONTROLLER 115 VAC
|
Siemens
|
|
A5E03390402
|
KIT F-2 COPPER SET AC PHASE 2
|
Siemens
|
|
A5E03393681
|
SIMATIC IPC, SPAREPART FRONT COMPL. 22TOUCH WIDE USB FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03391443002
|
MEMORY EXPANSION MODULE, 8K-BYTES SRAM + 8K-BYTES FLASH FOR ADV. PLUS
|
Siemens
|
|
A5E03390405
|
KIT F-3 BUS_BARS AC PHASE 3
|
Siemens
|
|
A5E03390859
|
SIMATIC PC, SPARE PART REPLACEMENTFRONT 19 WIDE TOUCH FOR SIMATIC PANEL PC IPC277D
|
Siemens
|
|
A5E03391443001
|
MEMORY EXPANSION MODULE, 8K-BYTES SRAM + 8K-BYTES FLASH FOR NAU AND GC
|
Siemens
|
|
A5E03392498
|
SIMATIC PG, SPARE PART, BATTERY COVER FOR FIELD PG M3
|
Siemens
|
|
A5E03846410
|
WD600,CUSTOM, BELT WIDTH=800MM, B=890MM,6 KG MILLTRONICS 600 WEIGH DECK 304 SS CONSTRUCTION WITH UHMW SLIDERS BELT WIDTH 800MM LOAD CELL CAPACITY 6 KG STAINLESS STEEL BELT WIDTH = 800MM MOUNTING B DIM = 890MM
|
Siemens
|
|
A5E03840602
|
7ML57471AB261AB0-Z, Y01, Y17, Y01=250MM, Y17=LSA-4014, LSA-4016 ELECTRONICS: CONTACTLESS ELECTRONIC SWITCH 20...250 V AC/DC APPROVAL WITHOUT APPROVALS PROCESS CONNECTION / MATERIAL FLANGE DN125 PN40 FORM C, DIN 2501 / ECTFE Y01=250MM Y17 = LSA 4014 AND LSA 4016
|
Siemens
|
|
A5E03862657
|
RIBBON CABLE MAIN PROCESSING BOARD - LUI
|
Siemens
|
|
A5E03860011
|
SET THREADED JOINTS FOR CABLE
|
Siemens
|
|
A5E03860020
|
PURGING STUB
|
Siemens
|
|
A5E03862665
|
RIBBON CABLE ANALYZER MODULE 1 - OPTIONAL MODULE 2.X
|
Siemens
|
|
A5E03860127
|
MAIN PROCESSING BOARD
|
Siemens
|
|
A5E03862669
|
RIBBON CABLE ANALYZER MODULE 2 - OPTIONAL MODULE 2.X
|
Siemens
|
|
A5E03860138
|
OPTIONAL MODULE 2.1 (6XAO + 6XDO)
|
Siemens
|
|
A5E03866328
|
7ML13011AA211XX0-Z,XX=DN50PN16 FORM E, Y01=171CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=171CM O-RINGS:VITON PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S)
|
Siemens
|
|
A5E03860162
|
TERMINAL BLOCK STANDARD
|
Siemens
|
|
A5E03866330
|
7ML13011AA317XX0-Z,XX=DN50PN16 Y01=235CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=235CM O-RINGS:CHEMRAZ PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S).
|
Siemens
|
|
A5E03860180
|
POWER JACK
|
Siemens
|
|
A5E03860189
|
RIBBON CABLE KB - MAIN PROCESSING BOARD
|
Siemens
|
|
A5E03866331
|
7ML13011AA411XX0-Z,XX=DN50PN16 FORM E, Y01=330CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=330CM O-RINGS:VITON PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S).
|
Siemens
|
|
A5E03866332
|
7ML13011AA417XX0-Z,XX= DN50PN16,Y01=310CM Y01=310CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=310CM O-RINGS:CHEMRAZ PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANGE
|
Siemens
|
|
A5E03860938
|
CAN CABLE
|
Siemens
|
|
A5E03866333
|
7ML13015AF321XX0-Z,XX= DN50PN16,Y01=290CM Y01=290CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL, STEAM MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=290CM O-RINGS:AEGIS PF 128 PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 16 EN 1092-1 TYPE E FLANGE FURTHER DESIGNS:PLEASE ADD-Z TO ORDER NO. AND SPECIFY ORDER CODE(S).
|
Siemens
|
|
A5E03860941
|
SUPPLY CABLE FOR MAIN PROCESSING BOARD
|
Siemens
|
|
A5E03860948
|
SUPPLY CABLE FOR ANALYZER MODULE
|
Siemens
|
|
A5E03867270
|
7ML54310XX201FF1,DN50 PN16 1092-1 E PROCESS CONNECTION AND ANTENNA MATERIAL: 316L STAINLESS STEEL, PTFE EMITTER, FKM SEAL FLANGED CONNECTIONS 316L DN 50 PN10/16 EN 1092-1 TYPE E, FLAT FACED COMMUNICATION:4-20MA HART, ENCLOSURE (WITH CABLE INLETS) ALUMINUM,EPOXY PAINT, 2 X M20 X 1.5 ANTENNA: 2 HORN WITH 100 MM EXTENSION APPROVALS:INCREASED SAFETY: IECEX/ATEX II 1/2 GD EX EMBIA IIC T4, EX TD A20 IP67 T90C, CE PRESSURE RATING: 0.5 BAR
|
Siemens
|
|
A5E03860962
|
SUPPLY CABLE FOR LUI MODULE
|
Siemens
|
|
A5E03867272
|
7ML54310XX201HF1,DN50 PN16 1092-1 E PROCESS CONNECTION AND ANTENNA MATERIAL: 316L STAINLESS STEEL, PTFE EMITTER, FKM SEAL FLANGED CONNECTIONS 316L DN 50 PN10/16 EN 1092-1 TYPE E, FLAT FACED COMMUNICATION:4-20MA HART, ENCLOSURE (WITH CABLE INLETS) ALUMINUM,EPOXY PAINT, 2 X M20 X 1.5 ANTENNA: 4 HORN WITH 100 MM EXTENSION APPROVALS:INCREASED SAFETY: IECEX/ATEX II 1/2 GD EX EMBIA IIC T4, EX TD A20 IP67 T90C, CE PRESSURE RATING: 0.5 BAR
|
Siemens
|
|
A5E03860966
|
RIBBON CABLE, ANALYZER MODULE - OPTIONAL MODULE 2.1
|
Siemens
|
|
A5E03867273
|
7ML13011AA113XX0-Z,XX=DN50PN16, FORM E,Y01=78CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=78CM O-RINGS:KALREZ 4079 PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S)
|
Siemens
|
|
A5E03867274
|
7ML13011AA113XX0-Z,XX=DN50PN16, FORM E, Y01=98CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=98CM O-RINGS:KALREZ 4079 PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S)
|
Siemens
|
|
A5E03860971
|
RIBBON CABLE KB - OPTIONAL MODULE 2.1
|
Siemens
|
|
A5E03867276
|
7ML13011AA117XX0-Z,XX=DN50PN16, FORM E, Y01=98CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=98CM O-RINGS:CHEMRAZ PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S)ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION MAX. 610 CM (240.2)
|
Siemens
|
|
A5E03861595
|
SINAMICS G120 REPAIR PART WLX_312874 HEATSINK FSA V-2 196X73X55 ((TAPER), ANSI/ASME B1.20.1) STILLING WELL: NO STILLING WELL NOTES: PROVIDED WITH NO ENCLOSURE OR TRANSMITTER
|
Siemens
|
|
A5E03861652
|
SINAMICS G120 REPAIR PART WLX_312455 HEATSINK FSB V-2 196X100X61 ((TAPER), ANSI/ASME B1.20.1) STILLING WELL: NO STILLING WELL NOTES: PROVIDED WITH NO ENCLOSURE OR TRANSMITTER
|
Siemens
|
|
A5E03867279
|
7ML13011AA211XX0-Z,XX=DN50PN16, FORM E, Y01=134CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=134CM O-RINGS:VITON PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S. ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX 610 CM (240.2)
|
Siemens
|
|
A5E03867281
|
7ML13011AA211XX0-Z,XX=DN50PN16, FORM E, Y01=154CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=154CM O-RINGS:VITON PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S).ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX. 610 CM (240.2)
|
Siemens
|
|
A5E03861685
|
SINAMICS G120 REPAIR PART WLX_312456 HEATSINK FSC V-2 295X140X61 ((TAPER), ANSI/ASME B1.20.1) STILLING WELL: NO STILLING WELL NOTES: PROVIDED WITH NO ENCLOSURE OR TRANSMITTER
|
Siemens
|
|
A5E03867285
|
7ML13011AA213XX0-Z,XX=DN50PN16, FORM E, Y01=118CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=118CM O-RINGS:KALREZ 4079 PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S).ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION MAX. 610 CM (240.2)
|
Siemens
|
|
A5E03862297
|
DOOR FOR WALL MOUNT BASE UNIT, COMPLETE
|
Siemens
|
|
A5E03867287
|
7ML13011AA213XX0-Z,XX=DN50PN1, FORM E, Y01=163CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=163CM O-RINGS:KALREZ 4079 PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S).ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX. 610 CM (240.2)
|
Siemens
|
|
A5E03862411
|
DUMMY PLATE FOR ANALYZER MODULE
|
Siemens
|
|
A5E03867288
|
SITRANS LG200 COAXIAL PROBES MLFB: 7ML1301-1AA21-3XX0-Z, XX=DN50PN16 FORM E, Y01=168CM MODEL COAXIAL MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNPROBE INSERTION LENGTH Y01=168CM O-RINGS KALREZ 4079 PROCESS CONNECTION (SIZE/TYPE) DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANG FURTHER DESIGNS PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S). ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX. 610 CM
|
Siemens
|
|
A5E03862437
|
DUMMY PLATE FOR GAS MANAGEMENT MODULE
|
Siemens
|
|
A5E03862587
|
COVER BEHIND DOOR
|
Siemens
|
|
A5E03862588
|
PROTECTION AGAINST CONTACT
|
Siemens
|
|
A5E03867291
|
SITRANS LG200 COAXIAL PROBES MLFB: 7ML1301-1AA21-7XX0-Z, XX=DN50PN16 FORM E, Y01=158CM MODEL COAXIAL MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNPROBE INSERTION LENGTH Y01=158CM O-RINGS CHEMRAZ PROCESS CONNECTION (SIZE/TYPE) DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANG FURTHER DESIGNS PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S). ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX. 610 CM
|
Siemens
|
|
A5E03862602
|
ENCLOSURE COVER
|
Siemens
|
|
A5E03867293
|
SITRANS LG200 COAXIAL PROBES 7ML1301-1AA21-7XX0-Z,XX= DN50PN16 FORM E, Y01=138CM MODEL COAXIAL MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNPROBE INSERTION LENGTH Y01=138CM O-RINGS CHEMRAZ PROCESS CONNECTION (SIZE/TYPE) DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANG FURTHER DESIGNS PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S). ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX. 610 CM
|
Siemens
|
|
A5E03867294
|
SITRANS LG200 COAXIAL PROBES MLFB: 7ML1301-1AA41-3XX0-Z, XX=DN50PN16 FORM E, Y01=356CM MODEL COAXIAL MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNPROBE INSERTION LENGTH Y01=356CM O-RINGS KALREZ 4079 PROCESS CONN. (SIZE/TYPE) DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANGFURTHER DESIGNS PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S). ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX. 610 CM
|
Siemens
|
|
A5E03862608
|
POWER JACK WITH RETAINING CLIP
|
Siemens
|
|
A5E03867295
|
SITRANS LG200 COAXIAL PROBES 7ML1301-2AE12-3XX0-Z,XX= DN50PN40 FORM E, Y01=78CM MODEL COAXIAL, HIGH TEMP/HIGH PRESSURE MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNPROBE INSERTION LENGTH Y01=78CM O-RINGS NONE PROCESS CONNECTION (SIZE/TYPE) DN 50 PN 40 EN 1092-1 TYPE E SPIGOT FLANGFURTHER DESIGNS PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S). ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX. 610 CM
|
Siemens
|
|
A5E03862614
|
DUMMY PLATE FOR ELECTRONIC BOARD
|
Siemens
|
|
A5E03862617
|
BRACKET FOR ELECTRONIC BOARD
|
Siemens
|
|
A5E03867319
|
SITRANS LG200 COAXIAL PROBES MLFB: 7ML1301-4AA11-3XX0-Z, XX=DN50PN40 FORM E, Y01=98CM MODEL COAXIAL, OVERFILL/ FLOODED CAGE MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNPROBE INSERTION LENGTH Y01=98CM O-RINGS KALREZ 4079 PROCESS CONN. (SIZE/TYPE) DN 50 PN 40 EN 1092-1 TYPE E SPIGOT FLANG FURTHER DESIGNS PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S). ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX. 610 CM
|
Siemens
|
|
A5E03862623
|
CABLE STRAP, HIGH TEMPERATURE
|
Siemens
|
|
A5E03867322
|
SITRANS LG200 COAXIAL PROBES 7ML1301-6AB11-3XX0-Z, XX=DN50PN16 FORM E, Y01=78CM MODEL COAXIAL, INTERFACE MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONN PROBE INSERTION LENGTH Y01=78CM O-RINGS KALREZ 4079 PROC.CONN.DN 50 PN 16 EN 1092-1 TYPE E SPIGOT FLANG FURTHER DESIGNS PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S). ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX. 610 CM
|
Siemens
|
|
A5E03862634
|
CABLE FOR SERVICE INTERFACE
|
Siemens
|
|
A5E03867328
|
7ML13012EE123XX0-Z,XX= DN50PN40 FORM E, Y01=68CM SITRANS LG200 COAXIAL PROBES MODEL:COAXIAL,HIGH TEMPERATURE /HIGH PRESSURE MATERIAL OF CONSTRUCTION: ENLARGED COAXIAL, 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION. PROBE INSERTION LENGTH: Y01=68CM O-RINGS:NONE PROCESS CONNECTION (SIZE/TYPE):DN 50 PN 40 EN 1092-1 TYPE E SPIGOT FLANGE FURTHER DESIGNS:PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S).ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION,MAX. 610 CM (240.2
|
Siemens
|
|
A5E03868457
|
MILLTRONICS MSI BELT SCALE CSTM MSI,7MH71221AU511A, 55-65 IDL MNT. SCALE CONSTRUCTION: STANDARD DUTY BELT WIDTH AND A DIMENSION: 36, A = 45 (1143 MM) LOAD CELL CAPACITY 750 LB (340.2 KG). FABRICATION: POLYESTER PAINTED MILD STEEL SYSTEM SPECIFICATION: STANDARD MSI AND MMI NOTE: STANDARD IDLER MOUNTS OF THE 18-54 MSI ARE REPLACED WITH STANDARD IDLER MOUNTS FROM THE 55-65. THIS MSI WILL HAVE STANDARD (18-54) HANGER BRACKETS.
|
Siemens
|
|
A5E03426525
|
DC VOLTAGE DIVIDER PCB A500
|
Siemens
|
|
A5E03862649
|
SUPPLY CABLE FOR ANALYZER MODULE 1
|
Siemens
|
|
A5E03426535
|
CAPICITOR MKP CAP 164U4 +-10% 440V_POLYPROPYLE
|
Siemens
|
|
A5E03424356
|
MODULAR COUPLER SL SERIES 5E SCREENED
|
Siemens
|
|
A5E03424550
|
RJ45 COUPLER 8-POLES SCREENED
|
Siemens
|
|
A5E03426542
|
SURGE ARRESTER DG S 385 FM 385V-0.5A
|
Siemens
|
|
A5E03424560
|
OVERVOLTAGE- ARRESTER DG S 600 FM
|
Siemens
|
|
A5E03426555
|
TRANSFORMER 350KVA-208V-480V-3PHASIG
|
Siemens
|
|
A5E03424570
|
FUSEHOLDER 2-POLE 30A 690VAC 10X38
|
Siemens
|
|
A5E03424573
|
FUSE DEVICE ATM FLINK 8A 600V
|
Siemens
|
|
A5E03424621
|
VARISTOR-PROTECTIONMODULE DG MOD440
|
Siemens
|
|
A5E03426558
|
CURRENT TRANSDUCER TYP M93L-750/5
|
Siemens
|
|
A5E03426568
|
FUSE UL 15A 500V
|
Siemens
|
|
A5E03424577
|
FUSEHOLDER 225-600A 700VDC
|
Siemens
|
|
A5E03426573
|
FUSE NH SUPERFLINK 160A 690V
|
Siemens
|
|
A5E03424636
|
INDUCTOR 80UH 1000A-208V(L-L)3POLES
|
Siemens
|
|
A5E03424635
|
VARISTOR-PROTECTIONMODULE DG MOD PV SCI 500
|
Siemens
|
|
A5E03426586
|
EOS VARISTOR
|
Siemens
|
|
A5E03424646
|
SHUNT 1200A-60MV-0.5-B
|
Siemens
|
|
A5E03426579
|
RESISTOR 1200W 2 OHM 5% UL
|
Siemens
|
|
A5E03424640
|
CABINET FAN 115-230V 50/60HZ
|
Siemens
|
|
A5E03426610
|
RJ45 JACK AND PROTECTING CAP
|
Siemens
|
|
A5E03424692
|
RESISTOR MET SHT 0207 2.49KOHM +-1% 600MW +5 PACKAGESIZE = 100 PCS
|
Siemens
|
|
A5E03426696
|
EMV-FILTER 3X16A 520V AC
|
Siemens
|
|
A5E03424824
|
FUSE ATM FLINK 5A 600V
|
Siemens
|
|
A5E03426655
|
EMV-FILTER 3X1000A-520V AC
|
Siemens
|
|
A5E03424739
|
SITRANS FUE950 OP INSTR EN
|
Siemens
|
|
A5E03426814
|
OUTPUT AC VOLTAGE SENSOR PCB A600
|
Siemens
|
|
A5E03424902
|
FUSE UL MODULOSTAR US101PC/I
|
Siemens
|
|
A5E03426950
|
FUSE HOLDER 3-POLE/30A/690VAC 10X38
|
Siemens
|
|
A5E03425259
|
FUSE ATM FLINK 2A 600V
|
Siemens
|
|
A5E03427013
|
CUSTOMIZED POTENTIALCABLE 4M
|
Siemens
|
|
A5E03425484
|
CURRENT TRANSDUCER DK20-C10
|
Siemens
|
|
A5E03425507
|
CUSTOM CIRCUIT MODULE EMG 10-B2 4POLE
|
Siemens
|
|
A5E03429426
|
KIT1-BUSBAR-3POL
|
Siemens
|
|
A5E03425503
|
DIODE FAST REC 10A01-07 1KV 10A DIODE 2_18
|
Siemens
|
|
A5E03425510
|
FUSE A70QS 400A 700V
|
Siemens
|
|
A5E03425946
|
CF-CARD CU320 1GB V4.3.2
|
Siemens
|
|
A5E03429469
|
KIT2 MULIFUNCTION DEVICEADAPTER 40A
|
Siemens
|
|
A5E03426058
|
ACCESSORY LOCTITE 243
|
Siemens
|
|
A5E03429542
|
KIT3 FLEXIBARCONNECTION DC-AC-CABINET
|
Siemens
|
|
A5E03873398
|
SPARE, E-40 FLOWGUIDE, 6, MS, PWDR PNT FLOWGUIDE SIZE: 6 INCH ASME FLANGE PATTERN FLOWGUIDE CONSTRUCTION: MILD STEEL, POLYESTER PAINTED NOTE: THE CEG CANNOT ENSURE THE EXISTING EQUIPMENT WHEN COMBINED WITH THE REPLACEMENT FLOWGUIDE, WILL WORK FOR THE INTENDED APPLICATION. PLEASE CONTACT THE ESG TO VERIFY THE APPLICATION.
|
Siemens
|
|
A5E03874763
|
7ML54270XX000AE0,XX=DN100 PN16 B1,4 HORN PROCESS CONNECTION AND ANTENNA MATERIAL 316L STAINLESS STEEL, PTFE EMITTER, FKM SEAL PROCESS CONNECTION DN100 PN10/16 DIN EN 1092-1 TYPE B1 RAISED FACED ANTENNA: 4 HORN (FITS 4 ASME OR DN 100 NOZZLES) OUTPUT / COMMUNICATION 4 TO 20 MA, HART CABLE INLET 2 X M20 X 1.5 AREA CLASSIFICATION INTRINSICALLY SAFE, IECEX/ATEX II 1 GD EX IA IIC T4, EX TD A20 IP67 T90C, R(&)TTE,C-TICK,INMETRO PRESSURE:PER CURVES IN MANUAL
|
Siemens
|
|
A5E03873548
|
7ML54231XX313CG1,XX=DN50PN16 TYPE E ANTENNA MATERIAL PTFE - USES ANTENNA ADAPTER PROCESS CONNECTION G 2 ASSEMBLED TO DN50PN16 1092-1 TYPE E FLANGE ANTENNA EXTENSIONS OR 100 MM (4) EXTENSION, 316L STAINLESS STEEL SHIELD PROCESS SEAL/GASKET FKM O-RING ENCLOSURE/CABLE INLET ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5, SIEMENS LUI COMMUNICATION/OUTPUT 4-20MA HART,START-UP AT<,3.6MA APPROVAL:ATEX II 1/2 G EEX EM IA IIC T4,NO BARRIER REQ. PRESSURE RATING 0.5 BAR MAX
|
Siemens
|
|
A5E03877124
|
7ML56506EG000DBX-Y02-500, Y01=850MM PROCESS CONNECTION DN 50, PN 16 LENGTH: Y01=850MM THERMAL ISOLATOR WITHOUT THERMAL ISOLATOR WETTED SEALS FKM PROBE MATERIAL 316L STAINLESS STEEL WITH PFA LINING AND PEEK ISOLATORS APPROVALS FLAMEPROOF ENCLOSURE WITH IS PROBE: ENCLOSURE ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65 ACTIVE SHIELD LENGTH Y01=500MM TOTAL INSERTION LENGTH Y01=850MM
|
Siemens
|
|
A5E03874760
|
7ML54270XX000AE0,XX=DN50 PN40 B1,2 HORN PROCESS CONNECTION AND ANTENNA MATERIAL 316L STAINLESS STEEL, PTFE EMITTER, FKM SEAL PROCESS CONNECTION DN50 PN25/40 DIN EN 1092-1 TYPE B1 RAISED FACED ANTENNA: 2 HORN (FITS 2 ASME OR DN 50 NOZZLES) OUTPUT / COMMUNICATION 4 TO 20 MA, HART CABLE INLET: 2 X M20 X 1.5 AREA CLASSIFICATION INTRINSICALLY SAFE, IECEX/ATEX II 1 GD EX IA IIC T4, EX TD A20 IP67 T90C,R(&)TTE,C-TICK,INMETRO PRESSURE:PER CURVES IN MANUAL
|
Siemens
|
|
A5E03873569
|
7ML5425XDA113CE1,X=1292MM SLIDING WAVEGUIDE ANTENNA MATERIAL - SLIDING WAVEGUIDE SYSTEM WITH 1292 MM WAVEGUIDE FLAT FACED FLANGES (316L SS) DN 150 PN 16,TYPEA,FLAT FACED COMMUNICATION/OUTPUT: PA PROCESS SEAL/GASKET NITRILE (-40 TO +100 C), ENCLOSURE/CABLE INLET ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5, SIEMENS LUI INTERFACE HORN SIZE/WAVEGUIDE OPTIONS 100 MM (4) HORN, FOR STILLPIPE APPLICATIONS ONLY APPROVAL:ATEX II 1 G EEX IA IIC T4,IS WITH SUITABLE BARRIER PRESSURE RATING 0.5 BAR
|
Siemens
|
|
A5E03879682
|
SINUMERIK 828D, PPU280/281 CNC-SOFTWARE MILLING, EXPORT SOFTWARE 2.7 SP3 ON CF-CARD WITH LICENSE
|
Siemens
|
|
A5E03874761
|
7ML54270XX000AE0,XX=DN80 PN40 B1,3 HORN PROCESS CONNECTION AND ANTENNA MATERIAL 316L STAINLESS STEEL, PTFE EMITTER, FKM SEAL PROCESS CONNECTION DN80 PN25/40 DIN EN 1092-1 TYPE B1 RAISED FACED ANTENNA 3 HORN (FITS 3 ASME OR DN 80 NOZZLES) OUTPUT / COMMUNICATION 4 TO 20 MA, HART CABLE INLET 2 X M20 X 1.5 AREA CLASSIFICATION INTRINSICALLY SAFE, IECEX/ATEX II 1 GD EX IA IIC T4, EX TD A20 IP67 T90C,R(&)TTE,C-TICK,INMETRO PRESSURE:PER CURVES IN MANUAL
|
Siemens
|
|
A5E03879884
|
7ML5732-1DE38-1DA0-Z, Y01=2000MM, WITH PFA COATING POWER SUPPLY 19 TO 230 V AC, 19 TO 55 V DC, ONE RELAY OUTPUT (SPDT) PROCESS TEMPERATURE SEPARATED ENCLOSURE - CABLE LENGTH 4.0 M (13.12 FT) MAX. TEMP PROCESS +180 C PROCESS CONNECTION DN100 PN 6, EN1092-1 (1.4541/321) EXTENSION LENGTH Y02=2000MM MATERIAL PROCESS CONNECTION/ EXTENSION STAINLESS STEEL 316TI (1.4571) APPROVALS CE, C-TICK
|
Siemens
|
|
A5E03436620
|
SIPART PS2, 6DR5... COMPACT OPERATING INSTRUCTIONS: ENGLISH, FRENCH, GERMAN, SPANISH, ITALIAN, DUTCH
|
Siemens
|
|
A5E03436655
|
SIPART PS2, 6DR5... COMPACT OPERATING INSTRUCTIONS: ENGLISH, ESTONIAN, LATVIAN, LITHUANIAN, POLISH, ROMANIAN
|
Siemens
|
|
A5E03433214
|
SPECIAL VERSION FOR LEUZE MOBILE DATA STORAGE MDS D139 TO ISO 15693 FOR EXTENTED TEMPERATURE RANGE UP TO +220 DGR, 112 BYTE EEPROM, IP 68 85 X 15 MM (DXH), (PACKAGING UNIT 10 PCS)
|
Siemens
|
|
A5E03436664
|
SIPART PS2, 6DR5... COMPACT OPERATING INSTRUCTIONS: ENGLISH, BULGARIAN, CZECH, FINNISH, SLOVAKIAN, SLOVENIAN
|
Siemens
|
|
A5E03436686
|
RECHARGABLE LITHIUM ION BATTERY FOR MAG 8000 GSM/GPRS COMMUNICATION MODU
|
Siemens
|
|
A5E03436683
|
SIPART PS2, 6DR5... COMPACT OPERATING INSTRUCTIONS: ENGLISH, DANISH, GREEK, PORTUGUESE,SWEDISH, HUNGARIAN
|
Siemens
|
|
A5E03433639V
|
TEMPERATURE SENSOR ISID
|
Siemens
|
|
A5E03433681V
|
WLAN ANTENNAS ISID
|
Siemens
|
|
A5E03436689
|
HIGH GAIN ANTENNA FOR MAG 8000 GSM/GPRS
|
Siemens
|
|
A5E03433697V
|
SCREW SET ISID
|
Siemens
|
|
A5E03436698
|
ANALOG INPUT CABLE FOR MAG 8000 GSM/GPRS COMMUNICATION MODULE
|
Siemens
|
|
A5E03433705V
|
CONSUMABLE MATERIAL ISID
|
Siemens
|
|
A5E03437668
|
SIMATIC PG, SPARE PART, BATTERY COVER FOR FIELD PG M3/M4
|
Siemens
|
|
A5E03435979V
|
INVERTER WITH ISOLATION FOILS I
|
Siemens
|
|
A5E03881071001
|
PLUG, HEATER TERMINATION, MODULAR
|
Siemens
|
|
A5E03881078
|
7ML54270XX000AE1,XX=DN150 PN10 B1, 4 HORN PROCESS CONNECTION AND ANTENNA MATERIAL 316L (1.4435 OR 1.4404)SS, PTFE EMITTER, FKM SEAL PROCESS CONNECTION DN150 PN10/16 DIN EN 1092-1 TYPE B1 RAISED FACED ANTENNA:4 HORN (FITS 4 ASME OR DN 100 NOZZLES) PURGE:NO PURGE CONNECTION OUTPUT / COMMUNICATION 4 TO 20 MA, HART CABLE INLET 2 X M20 X 1.5 AREA CLASSIFICATION IS, IECEX/ATEX II 1 GD EX IA IIC T4, EX TD A20 IP67 T90C, R(&)TTE, C-TICK, INMETRO PRESSURE RATING 0.5 BAR MAX
|
Siemens
|
|
A5E03881081
|
7ML54270XX000AE1,XX=G 2, 4 HORN PROCESS CONNECTION AND ANTENNA MATERIAL 316L (1.4435 OR 1.4404) SS, PTFE EMITTER, FKM SEAL PROCESS CONNECTION G 2 ((BSPP), EN ISO 228-1) (PARALLEL THREAD) ANTENNA 4 HORN (FITS 4 ASME OR DN 100 NOZZLES) PURGE:NO PURGE CONNECTION OUTPUT / COMMUNICATION 4 TO 20 MA, HART CABLE INLET 2XM20X1.5 AREA CLASSIFICATION IS, IECEX/ATEX II 1 GD EX IA IIC T4, EX TD A20 IP67 T90C,R(&)TTE,C-TICK,INMETRO PRESSURE RATING 0.5 BAR
|
Siemens
|
|
A5E03882575
|
BELT,CNVR,SBR,30X161,150PIW,2P, B-SECTION
|
Siemens
|
|
A5E03888794
|
SIMATIC IPC, SPAREPART SATA-CABLE-ODD DATA/POWER FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03444139
|
SINAMICS G120 REPAIR PART WLX_311724 PCB SUPPORT TRAY FSB 268X100X125
|
Siemens
|
|
A5E03441096
|
7ML5431XXX200XAX,HART SU<,3.6MA,NPT LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, NPT CABLE INLET, APPROVAL OPTION A, WITH HART (<,3.6MA START UP) COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03959533001
|
MODULE HARDWARE TESTER
|
Siemens
|
|
A5E03509421
|
SIMATIC PG, SPARE PART, MOTHERBOARD FOR FIELD PG M3 WITH S5 INTERFACE WITH S5 EPROMMER W/O PROCESSOR, W/O RAM
|
Siemens
|
|
A5E03510451
|
M500,50LB,304STAINLESS STEEL AND POLYURETHANE LINER 7MH7116-2AB1. M500 FLOWMETER, MILD STEEL HOUSING, 304STAINLESS STEEL SENSING PLATE WITH POLYURETHANE LINER, 50 LB LOADCELL NOTE: COMES WITH ATEX EQUIVALENT CERTIFICATE FOR THE LOADCELLS ONLY AS THEY ARE THE ONLY ELECTRICAL COMPONENT ON THIS UNIT. THE MECHANICAL CONSTRUCTION HAS NO IMPACT ON THE APPROVAL.
|
Siemens
|
|
A5E03505027
|
MICROMASTER 4 REPAIR PART WLX_999999 CABLE HOLDER MM4 FSD 430/440 IP
|
Siemens
|
|
A5E03509422
|
SIMATIC PG, SPARE PART, MOTHERBOARD FOR FIELD PG M3 W/O S5 INTERFACE W/O S5 EPROMMER W/O PROCESSOR, W/O RAM
|
Siemens
|
|
A5E03518208
|
WFDR 618-78.93-EGC-VI5 DENMARK (300MM INLET)
|
Siemens
|
|
A5E03510715
|
7ML11061XA200L,X=70M PROCESS CONNECTION: 1 NPT ((TAPER), ANSI/ASME B1.20.1) CABLE LENGTH: X = 70M CABLE FACING:STANDARD (CSM RUBBER) APPROVALS: FM CLASS I, ATEX II 2G, CSA CLASS I DIV. 2, SAA CLASS I MOUNTING FLANGE: DN 150, PN 10/16, TYPE A, FLAT FACED
|
Siemens
|
|
A5E03518308
|
7ML13011AA311XX0,XX=DN100 PN40 FORM E MODEL: COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 300 CM O-RINGS: VITON PROCESS CONNECTION: DN 100 PN40, EN1092-1 FORM E FLANGE
|
Siemens
|
|
A5E03518137
|
ISOLATING AMPLIFIER UE 60-100-300MV UA 10V
|
Siemens
|
|
A5E03518307
|
7ML13011AA411XX0,XX=DN100 PN40 FORM E MODEL: COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 320 CM O-RINGS: VITON PROCESS CONNECTION: DN 100 PN40, EN1092-1 FORM E FLANGE
|
Siemens
|
|
A5E03517329
|
TEST CHAIN,15LB/FT,12.33, 4PITCH,BUSHED 7MH7161-0DD30-Z - Y01 = 12.33 FT ALL PARTS TO BE NICKLE PLATED
|
Siemens
|
|
A5E03518309
|
7ML13011AA311XX0,XX=DN50 PN40 FORM E MODEL: COAXIAL MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 300 CM O-RINGS: VITON PROCESS CONNECTION: DN 50 PN40, EN1092-1 FORM E FLANGE
|
Siemens
|
|
A5E03518201
|
WFDR 618-78.93-EGC-VI5 DENMARK (200MM INLET)
|
Siemens
|
|
A5E03520382
|
SIMATIC PC, SPARE PART LCD DISPLAY 15 WIDE F0R SIMATIC PANEL PC IPC277D 1280 X 800 PIXEL
|
Siemens
|
|
A5E03523240
|
SIMATIC PC, SPARE PART, MAINBOARD IPC227D, 1,0 GHZ, 1 GB RAM, REMANENCE
|
Siemens
|
|
A5E03518339
|
WEIGHFEEDER 630-52-OHC-VI5
|
Siemens
|
|
A5E03965730
|
7ML56606JD110HBY-Z,X=Y02= 500MM ACTIVE SHIELD PROCESS CONN: DN 100,PN 16 EXTENDED ROD, LENGTH 1000 MM (39.37)WITH THERMAL ISOLATOR (FOR PROCESS CONN.TEMPERATURES OVER +85 C (+185 F) FFKM (FOR PROCESS TEMPERATURES ABOVE -20 C (-4 F)) 316L STAINLESS STEEL WITH PFA LINING AND PEEK ISOLATORS GENERAL PURPOSE (CSA, FM) ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65 Y02=500MM, ADD Z TO ORDER NO. AND SPECIFY ORDER CODES(S) : TAG INFO TBD MANUFACTURERS TEST CERTIFICATE: M TO DIN 55350, PART 18 AND TO ISO 9000
|
Siemens
|
|
A5E03524947
|
7ML13031AXX11AD0,XX=DN65 PN40TYP E,315CM MODEL: SINGLE ROD RIDIG PROBE MATERIAL OF CONSTRUCTION: 316/316L SS PROBE AND PROCESS CONNECTION PROCESS CONNECTION: XX = DN 65 PN40, EN1092-1 TYPE E FACING (SPIGOT FACING) O-RING: VITON PROBE INSERTION LENGTH: Y01 = 315CM
|
Siemens
|
|
A5E03526771
|
7ML54310XX101DC1,C11,Y15, 4150LB RF PROCESS CONNECTION AND ANTENNA MATERIAL: 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER, FKM SEAL PROCESS CONNECTION TYPE: 4 ASME, 150 LB, RAISED FACE COMMUNICATION: PROFIBUS PA ENCLOSURE:(WITH CABLE INLETS) ALUMINUM, EPOXY PAINT, 2 X M20 X 1.5 1-1/2 HORN 4 HORN (FITS 4 ASME OR DN 100 NOZZLES) APPROVALS:ATEX II 1 GD EEX IA IIC T4,IS BARRIER REQUIRED, R AND TTE, C-TICK, INMETRO PRESSURE RATING 0.5 BAR MAX C11 AND Y15
|
Siemens
|
|
A5E03523523
|
KIT,SPACER COAX PROBE WITH PARTS
|
Siemens
|
|
A5E03523241
|
SIMATIC PC, SPARE PART, MAINBOARD IPC227D, 1,0 GHZ, 1 GB RAM
|
Siemens
|
|
A5E03528943
|
ANTENNA KIT 2 G (BSPP) THREADED PVDF
|
Siemens
|
|
A5E03528941
|
ANTENNA KIT 2 NPT THREADED PVDF
|
Siemens
|
|
A5E03524944
|
7ML13031AXX11AB0,XX=DN80 PN40TYP E,145CM MODEL: SINGLE ROD RIDIG PROBE MATERIAL OF CONSTRUCTION: 316/316L SS PROBE AND PROCESS CONNECTION PROCESS CONNECTION: XX = DN 80 PN40, EN1092-1 TYPE E FACING (SPIGOT FACING) O-RING: VITON PROBE INSERTION LENGTH: Y01 = 145CM
|
Siemens
|
|
A5E03524946
|
7ML13031AXX11AC0,XX=DN50 PN40TYP E,205CM MODEL: SINGLE ROD RIDIG PROBE MATERIAL OF CONSTRUCTION: 316/316L SS PROBE AND PROCESS CONNECTION PROCESS CONNECTION: XX = DN 50 PN40, EN1092-1 TYPE E FACING (SPIGOT FACING) O-RING: VITON PROBE INSERTION LENGTH: Y01 = 205CM
|
Siemens
|
|
A5E03528947
|
ANTENNA KIT 2 R (BSPT) THREADED PVDF
|
Siemens
|
|
A5E03524945
|
7ML13031AXX11AC0,XX=DN100 PN40TYP E,205CM MODEL: SINGLE ROD RIDIG PROBE MATERIAL OF CONSTRUCTION: 316/316L SS PROBE AND PROCESS CONNECTION PROCESS CONNECTION: XX = DN 100 PN40, EN1092-1 TYPE E FACING (SPIGOT FACING) O-RING: VITON PROBE INSERTION LENGTH: Y01 = 205CM
|
Siemens
|
|
A5E03976691
|
LPS100 WITH PENDULUM SHAFT, LENGTH 500MM:7ML572X2AA000AA0 ,LPS100:STANDARD PADDLE LEVEL SWITCH (LOW COST MODEL), PROCESS CONNECTION BSP 1 EXTENSION LENGTH 150MM ENCLOSURE 1/2 THREAD CONDUIT ENTRY, ALUMINIUM, SCREWABLE LID. APPROVALS:CE, FM CLASS II, DIV. 1, GROUP E,F, G, CLASS III, ATEX I VOLTAGE SUPPLY VOLTAGE 24V DC NOTE: THIS QUOTE IS FOR A MINIMUM ORDER QTY OF 25 UNITS
|
Siemens
|
|
A5E03528948
|
KIT OF HARDWARE PARTS FOR LR250 THREADED PVDF ANTENNA
|
Siemens
|
|
A5E03976647
|
7ML5431XAD200DG0,X=304L SS,FKM PROCESS CONNECTION AND ANTENNA MATERIAL 304L STAINLESS STEEL, PTFE EMITTER, FKM SEAL THREADED CONNECTIONS 316L 2 NPT (ASME B1.20.1) (TAPERED THREAD) COMMUNICATION: 4-20MA HART, START-UP AT <,3.6MA ENCLOSURE:(WITH CABLE INLETS) ALUMINUM, EPOXY PAINT, 2 X 1/2 NPT ANTENNA:4 HORN(FITS 4 ASME OR DN 100 NOZZLES) APPROVALS:FLAMEPROOF:IECEX/ ATEX II 1/2 GD EX DMBIA IIC T4, EX TD A20 IP67 T90C, CE, R(&)TTE, C-TICK, INMETRO BR-EX DMBIA IIC T4
|
Siemens
|
|
A5E03976690
|
SITRANS LR260 WITH LR250 PROCESS CONNECTION 7ML54270XX000BA1,XX=2NPT, 3 HRN: PROCESS CONNECTION AND ANTENNA MATERIAL:316L (1.4435 OR1.4404) STAINLESS STEEL,PTFE EMITTER, FKM SEAL THREADED CONNECTIONS 316L: 2 NPT (ASME B1.20.1) ANTENNA:3 HORN (FITS 3 ASME OR DN 80 NOZZLES)PURGE (SELF CLEANING)CONNECTION NO PURGE CONNECTION.OUTPUT/ COMMUNICATION 4 TO 20 MA, HART. CABLE INLET 2 X 1/2 NPT. AREA CLASSIFICATION: GENERAL PURPOSE, CSA US/C, INDUSTRY CANADA, FCC, CE, R&TTE,C-TICK.PRESSURE RATING 0.5 BAR (7.25 PSI) MAXIMUM
|
Siemens
|
|
A5E03976692
|
7MH71221XX811A, A-DIM 2820MM, EXTRA SP NP MILLTRONICS MSI BELT SCALE SCALE CONSTRUCTION: STANDARD DUTY. BELT WIDTH AND A DIMENSION: A = 2820 MM LOAD CELL CAPACITY 1500 LB STANDARD LOADCELL FABRICATION STANDARD, POLYESTER PAINTED MILD STEEL SYSTEM SPECIFICATION STANDARD MSI AND MMI Y15, C11 AND ADDITIONAL SPANISH NAMEPLATE INCLUDED
|
Siemens
|
|
A5E03976651
|
7ML1201-1FK00,PRE-PROGRAMMED THE PROBE: MEASURING RANGE 5M (16.40 FT) TRANSDUCER/PROCESS CONNECTION: PVDF COPOLYMER, R 2 ((BSPT), EN 10226)). MODEL / APPROVAL: 2 WIRE, IS, ATEX, CSA, FM (AVAILABLE WITH 5MRANGE ONLY) INCLUDING: 2 BSP LOCKNUT PLASTIC - 7ML1830-1DQ PLASTIC M20 CABLE GLAND WITH METAL LOCKNUT - 7ML1930-1DB PRE PROGRAM INFO 4 MA-3.5M 20 MA - 0.5 M
|
Siemens
|
|
A5E03976664
|
WW200, 7MH73001AD000AA0-Z, CSTM W/ LOW PROFILE INLET 18 (457MM) BELT WDTH , 52 (1321MM) C/L INFEED TO C/L DISCHARGE (2 LEGS) CUSTOM LOW PROFILE SHEAR GATE INLET, 304 SS,10 KG (22LB) NICKEL PL. STEEL 500 PPR SHAFT MOUNTED OPTICAL ENCODER 0.25HP (0.19KW) 220-240/380- 480V 3PH 50/60 HZ POLYURETHANE ANTI STATIC 57 PIW, 2 PLY FDA/USDA APPROVED LEFT HAND Y74=11.05,SHEAR GATE ARC RADIUS Y74=11.05,APPLICATION DATA Y71=MTPH,Y72=0.24,Y73=7.2 AC GEARMOTOR REDUCTION RATIO Y73=51.41:1,CUSTOM LENGTH Y01=1200 MM C/L INFEED TO C/L DISCHARGE
|
Siemens
|
|
A5E03976694
|
7MH71221CNX35A, X=1500LB. CUSTOM LOAD CELL, WITH EXTRA SPANISH NAMEPLATE SCALE CONSTRUCTION STANDARD DUTY BELT WIDTH AND A DIMENSION 72 BELT, A = 81 (2057 MM) LOAD CELL CAPACITY 1500 LB, HERMETICALLY SEALED CUSTOM LOAD CELL FABRICATION STAINLESS STEEL 316 (1.4401) SYSTEM SPECIFICATION STANDARD MSI AND MMI Y15, C11 AND ADDITIONAL SPANISH NAMEPLATE INCLUDED
|
Siemens
|
|
A5E03976676
|
KIT,2 HORN,TANTALINE,LR250 2 HORN (FITS 2 ASME OR DN 50 NOZZLES) ALL SURFACES OF HORN ANTENNA TREATED WITH TANTALINE SURFACE ALLOY 50 MICRONS TANTALINE 3 MTH MFG GUARANTEE PART IS TESTED FOR INTEGRITY OF THE TANTALUM LAYER BY FULL IMMERSION IN HOT HYDROCHLORIC ACID FOR AT LEAST 48 H HTTP://WWW.TANTALINE.COM/
|
Siemens
|
|
A5E03976677
|
KIT,3 HORN,TANTALINE,LR250 3 HORN (FITS 3 ASME OR DN 80 NOZZLES) ALL SURFACES OF HORN ANTENNA TREATED WITH TANTALINE SURFACE ALLOY 50 MIC TANTALINE 3 MTH MFG GUARANTEE PART IS TESTED FOR INTEGRITY OF THE TANTALUM LAYER BY FULL IMMERSION IN HOT HYDROCHLORIC ACID FOR AT LEAST 48 H HTTP://WWW.TANTALINE.COM/
|
Siemens
|
|
A5E03533051
|
7ML13015AF321XX0,XX=DN50 PN25 FORM C MODEL: COAXIAL, STEAM MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 210 CM O-RINGS: AEGIS PF 128 PROCESS CONNECTION: XX = DN50, PN25 EN1092-1 FORM C APPLICATION DETAILS: PROCESS TEMPERATURE: 0 TO 280 DEG C PROCESS PRESSURE: 10 TO 16 BAR
|
Siemens
|
|
A5E03977669
|
7MH75603XB01,X=10M SENSOR: EXTENDED TEMPERATURE RANGE (-40 C TO +125C) CABLE LENGTH: X=10 METERS (32.81FT) SENSOR MOUNTING: MOUNTING DISK APPROVALS: CE
|
Siemens
|
|
A5E03441097
|
7ML5431XXX200XBX,HART SU<,(>,<,<,)>,3.6MA,NPT LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, NPT CABLE INLET, APPROVAL OPTION B, WITH HART (<,(>,<,<,)>,3.6MA START UP) COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03441098
|
7ML5431XXX200XDX,HART SU<,(>,<,<,)>,3.6MA,NPT LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, NPT CABLE INLET, APPROVAL OPTION D, WITH HART (<,3.6MA START UP) COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03441099
|
7ML5431XXX200XHX,HART SU <,3.6MA,NPT LR250 ENCLOSURE WITH BOARD STACK FOR HORN ANTENNA VERSIONS, NPT CABLE INLET, APPROVAL OPTION H, WITH HART (<,3.6MA START UP) COMMUNICATION, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03442457V
|
WLAN MODULE ISID INCL. ACCESSOR
|
Siemens
|
|
A5E03442502
|
KIT,HYDRO+,PANEL MNT,W/ COMPLETE FRAME
|
Siemens
|
|
A5E03442578
|
SINAMICS G120 REPAIR PART WLX_312871 ENCLOSURE FRONT PN FSABC 163X68X49
|
Siemens
|
|
A5E03442582
|
SINAMICS G120 REPAIR PART WLX_312872 ENCLOSURE SHIELD PN FSABC 154X64X8
|
Siemens
|
|
A5E03446802
|
SIMATIC IPC, SPAREPART LVDS & BACKLIGHT CABLE 12 FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03442670
|
CUSTOM E40 FLOWGUIDE, 8, MILD STEEL WITH SPECIAL PAINT
|
Siemens
|
|
A5E03447701
|
ABS. VALUE ENCODER ST 13 BIT SYNCHRONE WITH PROFIBUS DP OPERATING VOLTAGE 10-30 V SYNCHROFLANGE WITH HOOD AND PG RADIAL
|
Siemens
|
|
A5E03447703
|
ABS. VALUE ENCODER ST 13 BIT SYNCHRONE WITH PROFIBUS DP OPERATING VOLTAGE 10-30 V STRIP FLANGE WITH HOOD AND RADIAL PG
|
Siemens
|
|
A5E03442673
|
CUSTOM E40 FLOWGUIDE, 4, MILD STEEL WITH SPECIAL PAINT
|
Siemens
|
|
A5E03447705
|
ABSOLUTE VALUE ENCODER 25 BIT SYNCHRONE WITH PROFIBUS DP OPERATING VOLTAGE 10-30 V SYNCHROFLANGE WITH HOOD AND PG RADIAL
|
Siemens
|
|
A5E03447704
|
ABSOLUTE ENCODER ST 13 BIT WITH PROFIBUS DP CLOCK SYNCHRONIZED OPERATING VOLTAGE 10-30 V WITH HOLLOW SHAFT 8-15 MM WITH COVER AND PG RADIAL
|
Siemens
|
|
A5E03447707
|
ABSOLUTE ENCODER MT 27 BIT WITH PROFIBUS DP CLOCK SYNCHRONIZED OPERATING VOLTAGE 10-30 V WITH HOLLOW SHAFT 8-15 MM WITH COVER AND PG RADIAL
|
Siemens
|
|
A5E03447706
|
ABS. VALUE ENCODER MT 27 BIT SYNCHRONE WITH PROFIBUS DP OPERATING VOLTAGE 10-30 V CLAMP FLANGE WITH HOOD AND RADIAL PG
|
Siemens
|
|
A5E03448489
|
ABSOLUTE ENCODER 25 BIT SYNCHRONE WITH PROFIBUS DP OPERATING VOLTAGE 10-30 V CLAMPING FLANGE 65 MM SHAFT W. DRILLING FOR DOWEL PIN DOWEL PIN ENCLOSED WITH HOOD IN SPECIAL VERSION
|
Siemens
|
|
A5E03448490
|
ABS. VALUE ENCODER MT 27 BIT CLOCKED WITH PROFIBUS DP OPERATING VOLTAGE 10-30 V SUPPORTED FLANGE JOINT, SPECIAL VERSION WITH HOOD AND RADIAL SCREW FITTING
|
Siemens
|
|
A5E03894784
|
MILLTRONICS MUS BELT SCALE - NICKEL PLATED LOAD CELLS MLFB: MUS, 7MH7123-1XX10, CSTM LC, 20 KG, ATEX MILLTRONICS MUS BELT SCALE, CONSTRUCTION STANDARD FOR BELT WIDTH UP TO 1000 MM (42) NICKEL PLATED LOAD CELL CAPACITY 20 KG CUST. LOAD CELL APPLICATION OF SIWAREX WL260 FABRICATION POLYESTER PAINTED MILD STEEL SIWAREX WL260 20 KG CAPACITY II 1 G EX IA IIC T4 II 1 D EX IAD 20 T73 DEGREES II 3G EX NL IIC T4
|
Siemens
|
|
A5E03892433
|
SIMATIC PC, SPARE PART MODULE EXTENSION FRAME PCIE, 2-FOLD, FOR IPC427D
|
Siemens
|
|
A5E03895462
|
WW100 INLET KIT, SPARE, FLAT SHEAR GATE INCLUDES ONE PIECE 304 STAINLESS STEEL INLET 304 SS SHEAR GATE, Y74= FLAT BOTTOM 304 SS GATE CLAMP MOUNTING HARDWARE
|
Siemens
|
|
A5E03892445
|
7MH75601XA01,X=7M SENSOR: STANDARD TEMPERATURE RANGE (-20 C TO +80 C) CABLE LENGTH: 7 METERS (22.97 FT) SENSOR MOUNTING: NONE APPROVALS: CE
|
Siemens
|
|
A5E03895535
|
LC500,7ML55151AC142AA1Z, Y01=1300,Y02=100,Y15,C12, NACE CERTIFICATE VERSION: 1001 TO 2000 MM (39.41 TO 78.74) THREADED CONNECTION:2, ASME, 150 IB APPROVALS ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLOSURE/CABLE INLET 2XM20 X1.5 (IP68, ADAPTER) OPTIONS NONE THERMAL ISOLATOR OR REMOTE MOUNTED ELECTRONICS: WITHOUT ELECTRONIC OUTPUT:2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2 ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204 NACE CERTIFICATE
|
Siemens
|
|
A5E03892459
|
PULLEY,DN,6X24,1/4LAG,304SS, 40MM SHAFT
|
Siemens
|
|
A5E03895565
|
MSI, 7MH7122-2AJ24-1A, CUSTOM PAINT SCALE CONSTRUCTION HAZARDOUS DUTY CSA / FM CLASS II, DIV. 1, GROUPS E, F, G AND CLASS III BELT WIDTH AND A DIMENSION 26, A = 35 (889 MM) LOAD CELL CAPACITY 100 LB (45.4 KG) FABRICATION CUSTOM PAINT (COMPATIBLE WITH MWL WEIGHT CALIBRATION SYSTEM) SYSTEM SPECIFICATION STANDARD MSI AND MMI CUSTOM PAINT: DEGREE OF RUST REMOVAL, SA 2.5 PRIMER, ALKYDE RESIN
|
Siemens
|
|
A5E03892460
|
PULLEY,DR,6X24,1/4LAG,304SS, 40MM SHAFT
|
Siemens
|
|
A5E03895581
|
MSI, 7MH7122-2BK24-1A, CUSTOM PAINT SCALE CONSTRUCTION HAZARDOUS DUTY CSA / FM CLASS II, DIV. 1, GROUPS E, F, G AND CLASS III BELT WIDTH AND A DIMENSION 48, A = 57 (1448 MM) LOAD CELL CAPACITY 100 LB (45.4 KG) FABRICATION CUSTOM PAINT (COMPATIBLE WITH MWL WEIGHT CALIBRATION SYSTEM) SYSTEM SPECIFICATION STANDARD MSI AND MMI CUSTOM PAINT: DEGREE OF RUST REMOVAL, SA 2.5 PRIMER, ALKYDE RESIN
|
Siemens
|
|
A5E03893496
|
WW200, X30-79-YGC,X=HEATED PULLY,Y=CUSTOM COVERS
|
Siemens
|
|
A5E03895611
|
MWL, 7MH7218-1BK63-1, CUSTOM PAINT ACTUATION MANUALLY BELT WIDTH AND A DIMENSION 48, A= 57 (1448 MM) WEIGHT TYPE FOR USE WITH 6 INTEGRATED ROUND BAR WEIGHT (42-53, 131.8-154.8 KG) FABRICATION CUSTOM PAINT MILD STEEL CUSTOM PAINT: DEGREE OF RUST REMOVAL, SA 2.5 PRIMER, ALKYDE RESIN/
|
Siemens
|
|
A5E03893735
|
7ML54240XX012CA0,XX=DIN 11851 DN100 ANTENNA MATERIAL (USES ANTENNA ADAPTER):PTFE, ONE PIECE ROD ANTENNA PROCESS CONNECTION:DIN 11851 HYGIENIC THREADED FITTING CONFIGURATION/CONNECTION SIZE: DN100 HYGIENIC THREADED FITTING, DIN 11851,1.4404, PTFE SEAL FDA APPROVED ANTENNA EXTENSION:NO EXTENSION MOUNTING PARTS:COMPLETE 11851 FITTING INCLUDING LINER AND NUT FOR CUSTOMER INSTALLATION. ENCLOSURE/CABLE INLET:ALUMINUM, EPOXY PAINTED, 2X1/2NPT,SIEMENS LUI INTERFACE COMMUNICATION /OUTPUT:4-20MA HART, START-UP AT <,3.6MA
|
Siemens
|
|
A5E03895608
|
MWL, 7MH7218-1AJ31-1, CUSTOM PAINT ACTUATION MANUALLY BELT WIDTH AND A DIMENSION 26, A= 35 (889 MM) WEIGHT TYPE FOR USE WITH 3 INTEGRATED ROUND BAR WEIGHT (18-29, 15.9-22.7 KG) FABRICATION CUSTOM PAINTED MILD STEEL CUSTOM PAINT: DEGREE OF RUST REMOVAL, SA 2.5 PRIMER, ALKYDE RESIN
|
Siemens
|
|
A5E03895622
|
RBSS, 7MH7134-2AB22, CUSTOM PAINT MODEL:60 PULSES PER REVOLUTION FABRICATION CUSTOM PAINT MILD STEEL MOUNTING OPTIONS WITH MOUNTING KIT APPROVALS CE, C-TICK, ATEX II 1 G, EEX IA IIC T6, ATEX II 1D EX IAD 20 T108 C, CSA/FM SWITCH ISOLATOR 230 V AC, REQUIRED WITH RBSS IS CUSTOM PAINT: DEGREE OF RUST REMOVAL, SA 2.5 PRIMER, ALKYDE RESIN / ZINC
|
Siemens
|
|
A5E03894520
|
SINAMICS G120 REPAIR PART WLX_999999 PM240-PBO-15KW FSD R6 COATED
|
Siemens
|
|
A5E03894521
|
SINAMICS G120 REPAIR PART WLX_999999 PM240-PBO-18,5KW FSD R6 COATED
|
Siemens
|
|
A5E03894522
|
SINAMICS G120 REPAIR PART WLX_999999 PM240-PBO-22KW FSD R6 COATED
|
Siemens
|
|
A5E03896485001
|
REGULATOR ASSEMBLY, PURGE
|
Siemens
|
|
A5E03894523
|
SINAMICS G120 REPAIR PART WLX_999999 PM240-PBO-30KW FSE R5 COATED
|
Siemens
|
|
A5E03896485002
|
REGULATOR ASSEMBLY, VALVE GAS
|
Siemens
|
|
A5E03894524
|
SINAMICS G120 REPAIR PART WLX_999999 PM240-PBO-37KW FSE R5 COATED
|
Siemens
|
|
A5E03894525
|
SINAMICS G120 REPAIR PART WLX_999999 PM240-PBO-75KW FSF R0 COATED
|
Siemens
|
|
A5E03896485003
|
REGULATOR ASSEMBLY, REGULATED AIR
|
Siemens
|
|
A5E03899350
|
7ML57281MX215AB0, X=DN125 PN6 FLANGE PROCESS TEMPERATURE UP TO +80 C (+176 F) POWER SUPPLY 24 V DC, 1 REV/MIN., FAIL-SAFE PROCESS CONNECTION DN125 PN 16, EN1092-1 (1.4541/321) PROCESS PRESSURE UP TO 5 BAR (72.5 PSI) PROCESS CONNECTION MATERIAL STAINLESS STEEL 303 (1.4305) EXTENSION LENGTH 300 MM (11.81) MEASURING VANE RECTANGULAR VANE, 50X98MM (1.97X3.86) APPROVALS ATEX II 1 /2 D, C-TICK
|
Siemens
|
|
A5E03894526
|
SINAMICS G120 REPAIR PART WLX_999999 PM240-PBO-110KW FSF R0 COATED
|
Siemens
|
|
A5E03457090
|
BOARD MONITORING CURRENTSENSOR DC70A
|
Siemens
|
|
A5E03457100
|
SONST_910620_230V_
|
Siemens
|
|
A5E03453701
|
SINAMICS G120 REPAIR PART WLX_312873 .CU CARD DP 24V 180X100X50 ((TAPER), ANSI/ASME B1.20.1) STILLING WELL: NO STILLING WELL NOTES: PROVIDED WITH NO ENCLOSURE OR TRANSMITTER
|
Siemens
|
|
A5E03457102
|
CABLE TYPE 1 40 POLES
|
Siemens
|
|
A5E03453702
|
SINAMICS G120 REPAIR PART WLX_311789 CU CARD PROFIBUS V-2 180X100X50 ((TAPER), ANSI/ASME B1.20.1) STILLING WELL: NO STILLING WELL NOTES: PROVIDED WITH NO ENCLOSURE OR TRANSMITTER
|
Siemens
|
|
A5E03457104
|
CABLE TYPE2 26-POLES
|
Siemens
|
|
A5E03453720
|
SINAMICS G120 REPAIR PART WLX_311790 CU CARD USS V-2 180X100X50 ((TAPER), ANSI/ASME B1.20.1) STILLING WELL: NO STILLING WELL NOTES: PROVIDED WITH NO ENCLOSURE OR TRANSMITTER
|
Siemens
|
|
A5E03453738
|
SINAMICS G120 REPAIR PART WLX_311788 CU CARD CAN V-2 180X100X50 ((TAPER), ANSI/ASME B1.20.1) STILLING WELL: NO STILLING WELL NOTES: PROVIDED WITH NO ENCLOSURE OR TRANSMITTER
|
Siemens
|
|
A5E03455469
|
TERMINAL MODULE 2 415A 1KV UKH GREY
|
Siemens
|
|
A5E03455504
|
TERMINAL MODULE 2_232A_1KV_UKH_95
|
Siemens
|
|
A5E03457109
|
OVERVOLTAGE DIVERTER TNC230/400FM
|
Siemens
|
|
A5E03457113
|
COOLER AC 400V 1390U/MIN
|
Siemens
|
|
A5E03457122
|
FUSE,HLS- 3NE3335 560A 1000V
|
Siemens
|
|
A5E03457129
|
DEVICE COMMUNICATION TYPE COMPACT2104
|
Siemens
|
|
A5E03455510
|
TERMINAL_MOD_RAIL_2
|
Siemens
|
|
A5E03459595
|
PLEXIGLASS COVER FOR DC-FUSES
|
Siemens
|
|
A5E03457145
|
ADSL FIREWALL ROUTER TYPE DG834B
|
Siemens
|
|
A5E03459596
|
COOLER AC 400V 1420U/MIN
|
Siemens
|
|
A5E03456867
|
REMOTE-INFO-SYSTEM 8 DIGITAL IN-/OUTPUTS
|
Siemens
|
|
A5E03456872
|
SWITCH_OVERCURRENT 63A
|
Siemens
|
|
A5E03459597
|
FLASH DUKTOR BXTBAS
|
Siemens
|
|
A5E03459598
|
FLASH DUKTOR BXTML2BES24 33V
|
Siemens
|
|
A5E03456877
|
TRAFO_DT 288V_400V_260KVA
|
Siemens
|
|
A5E03459601
|
COM SERVER 10/100 BASET
|
Siemens
|
|
A5E03456907
|
CAPACITOR MKP_3X100U_15V
|
Siemens
|
|
A5E03459602
|
CURRENT SENSOR DC70A ICHECKER-ET
|
Siemens
|
|
A5E03456939
|
CAPACITOR MKP_166U_400V
|
Siemens
|
|
A5E03459603
|
CU-SET 420M 60HZ
|
Siemens
|
|
A5E03456957
|
CAPACITOR MKP 1UF_+-5%_1.2KV
|
Siemens
|
|
A5E03456959
|
SHUNT 100MV/250A_KL_0,5
|
Siemens
|
|
A5E03459606
|
FUSE SWITCH 160A
|
Siemens
|
|
A5E03456973
|
SENSOR THERMAL THERMOSTAT
|
Siemens
|
|
A5E03459611
|
OVERVOLTAGE DIVERTER 5V
|
Siemens
|
|
A5E03459610
|
OVERVOLTAGE DIVERTER 230/400V, 20KA
|
Siemens
|
|
A5E03459613
|
FLASH DUCTOR BXT ML4 BE 24
|
Siemens
|
|
A5E03456976
|
INDUCTOR_100UH_600A COMMUTATION INDUCTOR
|
Siemens
|
|
A5E03456983
|
CONNECTOR AWG 24-12 10P.
|
Siemens
|
|
A5E03456996
|
JACK AWG 24-12 10P. GREY
|
Siemens
|
|
A5E03459614
|
ELEGARD-CARTRIDGE FUSEFALLDETECTOR
|
Siemens
|
|
A5E03457023
|
SWITCH PROTECTION AGAINST CONTACT
|
Siemens
|
|
A5E03457006
|
BASEELEMENT HCC 4-FE
|
Siemens
|
|
A5E03457025
|
SWITCH CONTACTSET DISCONNECTOR
|
Siemens
|
|
A5E03459616
|
TWIN STORY RESTRICTOR 3PH CU 10
|
Siemens
|
|
A5E03459618
|
FLASH DUCTOR XT BXT ML2 BD 180
|
Siemens
|
|
A5E03459619
|
SOLAR S500 TRANSFORMERLESS FLEXIBAR
|
Siemens
|
|
A5E03457047
|
LOAD DISCONNECTOR NH_690V
|
Siemens
|
|
A5E03459621
|
SOLAR S500 TRANSFORMERLESS FLEXIBAR LI
|
Siemens
|
|
A5E03457055
|
OVERVOLTAGE PROTECTOR 600V_15KA_FM SN 1469
|
Siemens
|
|
A5E03457051
|
CURRENT TRANSFORMER PSA 514 650/0,2A 1VA KL.1
|
Siemens
|
|
A5E03459634
|
CURRENT TRANSFORMER 1.2KA 200MA 1W
|
Siemens
|
|
A5E03459623
|
SOLAR S500 TRANSFORMERLESS FLEXIBAR RE
|
Siemens
|
|
A5E03457056
|
OVERVOLTAGE PROTECTOR PROTECTIONMODULE T750
|
Siemens
|
|
A5E03457065
|
DEVICE MONITORING IRDH275-427 A-ISOMETER
|
Siemens
|
|
A5E03459662
|
CURRENT TRANSFORMER 1000/0,2A 1VA KL.1
|
Siemens
|
|
A5E03459666
|
CU-SATZ 500TL
|
Siemens
|
|
A5E03457076
|
TRAFO_DT 288V_400V_410KW
|
Siemens
|
|
A5E03459689
|
TRANSFORMER 10KVA 300V/400,230V
|
Siemens
|
|
A5E03906080
|
SPAREPART SITRANS FCS400 REMOTE VERSION SENSOR HOUSING NPT
|
Siemens
|
|
A5E03905351
|
7ML57474CXXX1BA0-Z,Y01,Y17, DN50,PN63,Y0,Y01=220MM,XXX= DN50PN63 EN1092-1, TYPE H SITRANS LVL200, RIGID EXTENSION ELECTRONICS: NAMUR SIGNAL APPROVAL: ATEX II 1G, 1/2G, 2G EEX IA IIC T6 + WHG PROCESS CONNECTION / MATERIAL FLANGE DN50 PN63 EN1092-1 TYPE H. Y01=220MM THIS FLANGE IS RATED FOR 37.9 BAR MADP
|
Siemens
|
|
A5E03906091
|
SPAREPART SITRANS FCT030 REMOTE VERSION MOUNTING BRACKET KIT WALL AND PIPE MOUNTING
|
Siemens
|
|
A5E03905356
|
7ML57474CXXX1BA0-Z,Y01,Y17, DN50,PN63,Y01=240MM, XXX=DN50PN63 EN1092-1 TYPE H ELECTRONICS NAMUR SIGNAL APPROVAL ATEX II 1G, 1/2G, 2G EEX IA IIC T6 + WHG PROCESS CONNECTION / MATERIAL FLANGE DN50 PN63 EN1092-1 TYPE H Y01=240MM
|
Siemens
|
|
A5E03906095
|
SPAREPART SITRANS FCS400 REMOTE VERSION M12 OPTION FOR DSL HOUSING
|
Siemens
|
|
A5E03905355
|
7ML57474CXXX1BA0-Z,Y01,Y17 DN50,PN63,Y01=230MM XXX=DN50PN63 EN1092-1 TYPE H ELECTRONICS NAMUR SIGNAL APPROVAL ATEX II 1G, 1/2G, 2G EEX IA IIC T6 + WHG PROCESS CONNECTION / MATERIAL FLANGE DN50 PN63 EN1092-1 TYPE H Y01=230MM
|
Siemens
|
|
A5E03906112
|
SPAREPART SITRANS FCT030 REMOTE VERSION TERMINAL HOUSE M20 PEDESTAL
|
Siemens
|
|
A5E03906104
|
SPAREPART SITRANS FCT030 REMOTE VERSION SOCKET, M12 PEDESTAL
|
Siemens
|
|
A5E03905359
|
7ML57474CXXX1BA0-Z,Y01,Y17, DN50,PN63,Y01=250MM,XXX= DN50PN63 EN1092-1 TYPE H ELECTRONICS NAMUR SIGNAL APPROVAL ATEX II 1G, 1/2G, 2G EEX IA IIC T6 + WHG PROCESS CONNECTION / MATERIAL FLANGE DN50 PN63 EN1092-1 TYPE H Y01=250MM
|
Siemens
|
|
A5E03905372
|
7ML1301-4AA11-3XX0-Z, XX=DN100PN63 FORM H,Y01=60CM, Y15 COAXIAL 1) 2) COAXIAL, OVERFILL/FLOODED CAGE MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01=60CM O-RINGS KALREZ 4079 PROCESS CONNECTION (SIZE/TYPE) DN 100 PN 63 EN 1092-1 TYPE H FLANGE
|
Siemens
|
|
A5E03906130
|
SPAREPART SITRANS FCT030 REMOTE VERSION TERMINAL HOUSE 1/2 NPT PEDESTAL
|
Siemens
|
|
A5E03906888
|
7ML55150AXX41AA1-Z Y01+Y02+ Y15,Y01=600MM,Y02=50MM,XX= DN100 PN63, TYPE H EN1092-1 FLANGE 200 TO 1000 MM (7.87 TO 39.37)PROC.CONN.(316L STAINLESS STEEL) DN100 PN63 EN 1092-1 TYPE H APPROVALS ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLOSURE/CABLE INLET 2 X 1/2NPT IP68 OPTIONS: NONE 2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2 _3300 PF) ADD Z TO ORDER NO.SPECIFY ORDER CODE(S)STAINLESS STEEL TAG 69 X 50 MM (2.71 X 1.97) Y01=600MM Y02=50MM Y15=01- LT0111,01-LT0402 FLANGE IS RATED 50.1 BAR MADP
|
Siemens
|
|
A5E03905373
|
7ML1301-4AA31-3XX0-Z, XX=DN100PN63 FORM H,Y01=250CM ,Y15 COAXIAL 1) 2) COAXIAL, OVERFILL/FLOODED CAGE MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01=250CM O-RINGS KALREZ 4079 PROCESS CONNECTION (SIZE/TYPE) DN 100 PN 63 EN 1092-1 TYPE H FLANGE
|
Siemens
|
|
A5E03905380
|
7ML1301-4AA11-3XX0-Z, XX=DN100PN40 FORM E, Y01=60CM,Y15 COAXIAL 1) 2) COAXIAL, OVERFILL/FLOODED CAGE MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01=60CM O-RINGS KALREZ 4079 PROCESS CONNECTION(SIZE/TYPE) DN 100 PN 40 EN 1092-1 TYPE H FLANGE
|
Siemens
|
|
A5E03906889
|
7ML55150AXX41AA1-Z Y01+Y02+ Y15,Y01=400MM,Y02=50MM,XX= DN100 PN40,TYPE 200 TO 1000 MM (7.87 TO 39.37)PROC.CONN: DN100 PN40 EN 1092-1 TYPE E APPROVALS ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 2 X 1/2NPT IP68 OPTIONS NONE WITHOUT THERMAL ISOLATOR ELECT OUTPUT 2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2 _3300 PF) PLEASE Z TO ORDER NO. STAINLESS STEEL TAG (69 X 50 MM (2.71 X 1.97)): Y01=400MM,Y02=50MM Y15=02-LT0103A,02-LT0103B
|
Siemens
|
|
A5E03905382
|
7ML1301-4AA11-3XX0-Z, XX=DN100PN40 FORM E, Y01=80CM,Y15 COAXIAL 1) 2) COAXIAL, OVERFILL/FLOODED CAGE MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01=80CM O-RINGS KALREZ 4079 PROCESS CONNECTION(SIZE/TYPE) DN 100 PN 40 EN 1092-1 TYPE H FLANGE
|
Siemens
|
|
A5E03906890
|
7ML55150AXX41AA1-Z Y01+Y02+Y15 Y01=600MM,Y02=50MM,XX=DN100 PN40, E EN1092-1 FLANGE VERSION 200 TO 1000 MM (7.87 TO 39.37) PROC.CONN. DN100 PN40 EN 1092-1 TYPE E APPROVALS ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLOSURE/CABLE INLET 2 X 1/2 NPT IP68 WITHOUT THERMAL ISOLATOR OR REMOTE ELECTRONICS ELECT.OUTPUT 2-WIRE LOOP CUR. 4 TO 20MA(TRANSMITTER MSP2002- 2 _ 3300 PF)ADD Z TO ORDER TOTAL INSERTION LENGTH STAINLESS STEEL TAG (69 X 50MM (2.71 X 1.97)): Y01=600MM Y02=50MM Y15=01 -LT0116,01-LT0406
|
Siemens
|
|
A5E03905385
|
7ML1301-4AA11-1XX0-Z, XX=DN100PN40 FORM E, Y01=100CM,Y15 COAXIAL 1) 2) COAXIAL, OVERFILL/FLOODED CAGE MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01=100CM O-RINGS KALREZ 4079 PROCESS CONNECTION(SIZE/TYPE) DN 100 PN 40 EN 1092-1 TYPE H FLANGE
|
Siemens
|
|
A5E03906891
|
7ML55150AXX41AA1-Z Y01+Y02+ Y15,Y01=900MM,Y02=50MM,XX= DN100 PN40, TYPE E EN1092-1 FLANGE VERSION:200 TO 1000 MM (7.87 TO 39.37)PROC.CONN (316L STAINLESS STEEL) DN100 PN40 EN 1092-1 TYPE E APPROVALS ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLOSURE/CABLE INLET 2 X 1/2 NPT IP68 ELECTRONIC OUTPUT 2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2 _3300 PF ADD Z TO ORDER NO. ENTER THE TOTAL INSERTION LENGTH SS TAG (69 X 50 MM (2.71 X 1.97)): Y01=900MM Y02=50MM Y15=04-LT0206,04-LT0207 ,04-LT0208
|
Siemens
|
|
A5E03905405
|
7ML1301-4AA21-1XX0-Z, XX=DN100PN40 FORM E, Y01=160CM,Y15 COAXIAL 1) 2) COAXIAL, OVERFILL/FLOODED CAGE MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01=160CM O-RINGS KALREZ 4079 PROCESS CONNECTION(SIZE/TYPE) DN 100 PN 40 EN 1092-1 TYPE H FLANGE
|
Siemens
|
|
A5E03906892
|
7ML55150AXX41AA1-Z Y01+Y02+ Y15,Y01=1600MM,Y02=50MM,XX= TYPE E EN1092-1 FLANGE VERSION 200 TO 1000 MM (7.87 TO 39.37) DN100 PN40 EN 1092-1 TYPE E APPROVALS ATEX II 1/2 GD EEX D (A) IIC T6 TO T1 2 X 1/2NPT IP68 WITHOUT THERMAL ISOLATOR OR REMOTE ELECTRONICS ELECTRONIC OUTPUT 2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2_ADD Z TO ORDER NO. IN PLAIN TEXT DE SS TAG (69 X 50 MM (2.71 X 1.97)) : Y01=1600MM Y02=50MM Y15=03-LT0105,03-LT0404
|
Siemens
|
|
A5E03905417
|
7ML1301-4AA21-3XX0-Z, XX=DN100PN40 FORM E, Y01=160CM,Y15 COAXIAL 1) 2) COAXIAL, OVERFILL/FLOODED CAGE MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01=160CM O-RINGS KALREZ 4079 PROCESS CONNECTION(SIZE/TYPE) DN 100 PN 40 EN 1092-1 TYPE H FLANGE
|
Siemens
|
|
A5E03907414
|
ACCESSORY SITRANS FC430 BAG OF GLANDS BLACK PLASTIC (METRIC)
|
Siemens
|
|
A5E03905418
|
7ML1301-4AA21-7XX0-Z, XX=DN100PN40 FORM E, Y01=160CM,Y15 COAXIAL 1) 2) COAXIAL, OVERFILL/FLOODED CAGE MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01=160CM O-RINGS CHEMRAZ PROCESS CONNECTION(SIZE/TYPE) DN 100 PN 40 EN 1092-1 TYPE H FLANGE
|
Siemens
|
|
A5E03907424
|
ACCESSORY SITRANS FC430 BAG OF GLANDS EX E/I PLASTIC (METRIC)
|
Siemens
|
|
A5E03905422
|
7ML1301-4AA21-1XX0-Z, XX=DN100PN40 FORM E, Y01=200CM,Y15 COAXIAL 1) 2) COAXIAL, OVERFILL/FLOODED CAGE MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01=200CM O-RINGS VITON PROCESS CONNECTION(SIZE/TYPE) DN 100 PN 40 EN 1092-1 TYPE H FLANGE
|
Siemens
|
|
A5E03907429
|
ACCESSORY SITRANS FC430 BAG OF GLANDS STST (METRIC)
|
Siemens
|
|
A5E03905425
|
7ML1301-4AA21-3XX0-Z, XX=DN100PN40 FORM E, Y01=200CM,Y15 COAXIAL 1) 2) COAXIAL, OVERFILL/FLOODED CAGE MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01=200CM O-RINGS KALREZ 4079 PROCESS CONNECTION(SIZE/TYPE) DN 100 PN 40 EN 1092-1 TYPE H FLANGE
|
Siemens
|
|
A5E03907430
|
ACCESSORY SITRANS FC430 BAG OF GLANDS NIPLATEDBRASS (METRIC)
|
Siemens
|
|
A5E03905426
|
7ML1301-4AA21-7XX0-Z, XX=DN100PN40 FORM E, Y01=200CM,Y15 COAXIAL 1) 2) COAXIAL, OVERFILL/FLOODED CAGE MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01=200CM O-RINGS CHEMRAZ PROCESS CONNECTION(SIZE/TYPE) DN 100 PN 40 EN 1092-1 TYPE H FLANGE
|
Siemens
|
|
A5E03907435
|
ACCESSORY SITRANS FC430 BAG OF GLANDS BLACK PLASTIC (NPT)
|
Siemens
|
|
A5E03905428
|
SITRANS LG200 COAXIAL PROBES: 7ML1301-2AE32-3XX0-Z,XX= DN100PN40 FORM E,Y01=250CM,Y15 COAXIAL 1) 2):COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01=250CM. O-RINGS NONE PROCESS CONNECTION(SIZE/TYPE) DN 100 PN 40 EN 1092-1 TYPE E FLANGE. FURTHER DESIGNS PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S).STAINLESS STEEL TAG Y15=03-LT0110A,03-LT0110B ,03-LT0110C
|
Siemens
|
|
A5E03907451
|
ACCESSORY SITRANS FC430 BAG OF GLANDS EX E/I GREY PLASTIC (NPT)
|
Siemens
|
|
A5E03905430
|
SITRANS LG200 COAXIAL PROBES: 7ML1301-4AA31-3XX0-Z,XX= DN100PN40 FORM E,Y01=250CM, Y15. COAXIAL 1) 2):COAXIAL, OVERFILL/FLOODED CAGE.MATERI AL OF CONSTRUCTION:316/316L STAINLESS STEEL.PROBE AND PROCESS CONN.PROBE INSERTION LENGTH:Y01=250CM. O-RINGS: KALREZ 4079.PROCESS CONNECT -TION (SIZE/TYPE):DN100 PN40 EN 1092-1.TYPE E FLANGE. FURTHER DESIGNS.PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S).STAINLESS STEEL TAG:Y15=01-LT0110A,01-LT0405 ,02-LT0102,LT0102,02-LT0104A, 02-LT0104B,02-LT0104C,02-LT0108 02
|
Siemens
|
|
A5E03907467
|
ACCESSORY SITRANS FC430 BAG OF GLANDS STST (NPT)
|
Siemens
|
|
A5E03905433
|
SITRANS LG200 COAXIAL PROBES: 7ML1301-4AA31-3XX0-Z,XX= DN100PN40 FORM E,Y01=290CM, Y15:COAXIAL 1) 2) COAXIAL, OVERFILL/FLOODED CAGE.MATER -IAL OF CONSTRUCTION316/316L SS PROBE AND PROCESS CONN PROBE INSERTION LENGTH Y01= 290CM.O-RINGS:KALREZ 4079 PROCESS CONNECTION:(SIZE/TYPE) DN100 PN40 EN 1092-1 TYPE E FLANGE.FURTHER DESIGNS PLEASE ADD-ZTO ORDER NO.STAINLESS STEEL TAG Y15=04-LT0201A, 04-LT0201B,04-LT0201C,04-LT0 202A,04-LT0202B,04-LT0202C, 04-LT0203A,04-LT0203B,04- LT0203C,04-LT0204A,04-LT0204B, 04-LT02
|
Siemens
|
|
A5E03907473
|
ACCESSORY SITRANS FC430 BAG OF GLANDS NIPLATEDBRASS (NPT)
|
Siemens
|
|
A5E03909039
|
P350-3M PENTIUM M 760, 2.0 GHZ, 533 MHZ PROFIBUS MPI, 512 MB DDR2 SODIMM, DC 24 V POWER SUPPLY, W/O OPERATION SYTEM, 2 X10/100 MBITS ETHERNET, 4 X USB V2.0, 1 X SERIAL, 1 SLOT CF FLASH DRIVE CUSTOMER SPECIFIC: SSD 80 GB
|
Siemens
|
|
A5E03905435
|
SITRANS LG200 COAXIAL PROBES 7ML1301-4AA41-3XX0-Z,XX =DN100PN40 FORM E,Y01=390CM, Y15 COAXIAL 1) 2) COAXIAL, OVERFILL/FLOODED CAGE 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH Y01=390CM O-RINGS KALREZ 4079 PROCESS CONNECTION (SIZE/TYPE) DN100 PN40 EN 1092-1 TYPE E FLANGE PLEASE ADD -ZTO ORDER NO. AND SPECIFY ORDER CODE(S). STAINLESS STEEL TAG Y15=03- LT0109A,03-LT0109B,03-LT0109C
|
Siemens
|
|
A5E03464760
|
SIMATIC PG, SPARE PARTS SET, BOTTOM SECTION, AIR REGISTER FOR FIELD PG M3 (STARTING FROM SVP B2 ...)
|
Siemens
|
|
A5E03461220
|
G-FUSE DELAY ACTION 2A 600V
|
Siemens
|
|
A5E03465021
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CORE I7-3517UE, PROFIBUS FOR SIMATIC IPC427D
|
Siemens
|
|
A5E03461432
|
SITRANS FUE950 SPARE PART: FUE950 PULSE INPUT MODULE WITH 2 INPUTS (7ME348 VERSIONS ONLY).
|
Siemens
|
|
A5E03465022
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CORE I3-3217UE, PROFIBUS FOR SIMATIC IPC427D
|
Siemens
|
|
A5E03461436
|
SITRANS FUE950 SPARE PART: FUE950 PULSE OUTPUT MODULE WITH 2 OUTPUTS (7ME348 VERSIONS ONLY).
|
Siemens
|
|
A5E03465023
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CELERON U827E, PROFIBUS FOR SIMATIC IPC427D
|
Siemens
|
|
A5E03461437
|
SITRANS FUE950 SPARE PART: FUE950 COMBI. PULSE MODULE WITH 2 INPUTS AND 1 OUTPUT (7ME348 VERSIONS ONLY).
|
Siemens
|
|
A5E03461459
|
SITRANS FUE950 SPARE PART: FUE950 RS-232 DATA MODULE MODULE (7ME348 VERSIONS ONLY).
|
Siemens
|
|
A5E03465024
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CELERON U827E, CAN FOR SIMATIC IPC427D
|
Siemens
|
|
A5E03465025
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CORE I7-3517UE, W/O FIELDBUS FOR SIMATIC IPC427D
|
Siemens
|
|
A5E03461508
|
SITRANS FUE950 SPARE PART: BOTTOM PART OF FUE950 ENCLOSURE (1 PCS.)
|
Siemens
|
|
A5E03465026
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CORE I3-3217UE, W/O FIELDBUS FOR SIMATIC IPC427D
|
Siemens
|
|
A5E03461512
|
SITRANS FUE950 SPARE PART: FUE950 RS-485 DATA MODULE MODULE (7ME348 VERSIONS ONLY).
|
Siemens
|
|
A5E03461516
|
SITRANS FUE950 SPARE PART: FUE950 M-BUS OUTPUT MODULE (7ME348 VERSIONS ONLY).
|
Siemens
|
|
A5E03465271
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CORE I7-3517UE, PROFINET IRT FOR SIMATIC IPC427D
|
Siemens
|
|
A5E03465027
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CELERON U827E, W/O FIELDBUS FOR SIMATIC IPC427D
|
Siemens
|
|
A5E03465272
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CORE I3-3217UE, PROFINET IRT FOR SIMATIC IPC427D
|
Siemens
|
|
A5E03461583
|
SITRANS FUE950 SPARE PART: FUE950 COMBINATION CURRENT OUTPUT MODULE, 2X 4-20MA PASSIVE (7ME348 VERSIONS ONLY).
|
Siemens
|
|
A5E03461585
|
SITRANS FUE950 SPARE PART: FUE950 MODULE CONNECTION CABLE WITH 2 PLUGS (1 PSC.) (7ME348 VERSIONS ONLY).
|
Siemens
|
|
A5E03461708
|
SITRANS FUE950 SPARE PART: FUE950 BATTERY 3.6 V (D-CELL TYPE) (7ME348 VERSIONS ONLY).
|
Siemens
|
|
A5E03461717
|
SITRANS FUE950 SPARE PART: FUE950 230 VAC MODULE INCL. BACK-UP BATTERY (INCL. INTERNAL FUSE T50MA L 250 V), (7ME348 VERSIONS ONLY).
|
Siemens
|
|
A5E03465401
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CORE I7-3517UE, PROFIBUS FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03465402
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CORE I3-3217UE, PROFIBUS FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03461719
|
SITRANS FUE950 SPARE PART: FUE950 24 V AC SUPPLY MODULE, INCL. BACK-UP BATTERY (7ME348 VERSIONS ONLY).
|
Siemens
|
|
A5E03465403
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CELERON U827E, PROFIBUS FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03461778
|
SITRANS FUE950 ACCESSORY: TEST-LAB VERSION OF RE-PROGRAMMING SOFTWARE TOOL FOR FUE950 (7ME348 TYPES ONLY) NOTE: BEFORE USING THESE TEST-LAB VERSION A ONLINE TRAINING HAVE TO BE DONE.
|
Siemens
|
|
A5E03461896
|
E40 BASEMOUNT HOUSING WITH SPECIAL PAINT
|
Siemens
|
|
A5E03465404
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CORE I7-3517UE, W/O FIELDBUS FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03462868
|
SITRANS FUE950 SPARE PART: FUE950 STAINLESS STEEL POCKET G1/2B, 135 MM (PN40, MAX. 5 M/S) FOR PT500 SENSOR, 6 MM TYPE (1 PCS.).
|
Siemens
|
|
A5E03465405
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CORE I3-3217UE, W/O FIELDBUS FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03462870
|
SITRANS FUE950 SPARE PART: FUE950 STAINLESS STEEL POCKET G1/2B, 225 MM (PN40, MAX. 5M/S) FOR PT500 SENSOR, 6 MM TYPE (1 PCS.).
|
Siemens
|
|
A5E03465406
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CELERON U827E, W/O FIELDBUS FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03462872
|
SITRANS FUE950 SPARE PART: FUE950 TEMPERATURE SENOR PAIR PT500 SENSOR PAIR (6/140MM), WITH MID-MI004 AND PTB-K7.2 APPROVAL, 4-WIRE WITH 5 M CONNECTION CABLE. SENSOR WITH 6 MM DIAMETER AND 140MM LENGTH (1 SET) (APPROVALS ARE ONLY VALID IF TEMP. SENSORS ARE USED WITH THE APPLICABLE TEMPERATURE SENSOR POCKETS).
|
Siemens
|
|
A5E03462878
|
SITRANS FUE950 SPARE PART: FUE950 TEMPERATURE SENOR PAIR PT500 SENSOR PAIR (6/230MM), WITH MID-MI004 AND PTB-K7.2 APPROVALS, 4-WIRE WITH 5 M CONNECTION CABLE. SENSOR WITH 6 MM DIAMETER AND 230MM LENGTH (1 SET) (APPROVALS ARE ONLY VALID IF TEMP. SENSORS ARE USED WITH THE APPLICABLE TEMPERATURE SENSOR POCKETS).
|
Siemens
|
|
A5E03465953
|
SIMATIC PG, ASSEMBLY HANDLE 1 X HANDLE, 1 X FACEPLATE LEFT, 1 X.FACEPLATE RIGHT, 1 X STAR SCREWDRIVER TX20 FOR FIELD PG M3
|
Siemens
|
|
A5E03463951
|
HDD VAS 5052A 250 GB (CONTAINS A5E03375258)
|
Siemens
|
|
A5E03466441
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CORE I7-3517UE, PROFINET IRT FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03466442
|
SIMATIC IPC, SPAREPART MAINBOARD WITH MRAM, CORE I3-3217UE, PROFINET IRT FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03463951V
|
HDD VAS 5052A 250 GB (CONTAINS A5E03375258)
|
Siemens
|
|
A5E03467866001
|
THERMISTOR, DPM V3, NORMAL
|
Siemens
|
|
A5E03464757
|
SIMATIC PG, SPARE PART KEYBOARD MODULE, KEYBOARD GERMAN/INT. KEYBOARD FRAME, TOUCHPAD FOR FIELD PG M3 (STARTING FROM SVP B2 ...)
|
Siemens
|
|
A5E03467983001
|
POWER ENTRY CONTROL MODULE, DC (PECM-DC)
|
Siemens
|
|
A5E03912164
|
KIT, FMS-220, WALL MOUNT, WITH STAINLESS STEEL CHAIN AND HINGE
|
Siemens
|
|
A5E03464759
|
SIMATIC PG, SPARE PART KEYBOARD MODULE, KEYBOARD FRENCH, KEYBOARD FRAME, TOUCHPAD FOR FIELD PG M3 (STARTING FROM SVP B2 ...)
|
Siemens
|
|
A5E03914962
|
CABLE 10 M, (M12) BLUE (EX)
|
Siemens
|
|
A5E03913364
|
7MH7145X, HYGENIC ENCLOSURE ENCLOSURE HYGENIC ENCLOSURE (RITTAL PART NUMBER - 1670600) SS CABLE GLANDS INCLUDED - QTY 2
|
Siemens
|
|
A5E03914973
|
CABLE 10 M, (TERM.) BLUE (EX)
|
Siemens
|
|
A5E03914805
|
CABLE 5 M, (M12) GREY
|
Siemens
|
|
A5E03914833
|
CABLE 5 M, (TERM.) GREY
|
Siemens
|
|
A5E03914984
|
CABLE 25 M, (TERM.) BLUE (EX)
|
Siemens
|
|
A5E03914849
|
CABLE 10 M, (TERM.) GREY
|
Siemens
|
|
A5E03914995
|
CABLE 25 M, (M12) BLUE (EX)
|
Siemens
|
|
A5E03915004
|
CABLE 50 M, (M12) BLUE (EX)
|
Siemens
|
|
A5E03915015
|
CABLE 50 M, (TERM.) BLUE (EX)
|
Siemens
|
|
A5E03914850
|
CABLE 10 M, (M12) GREY
|
Siemens
|
|
A5E03914854
|
CABLE 25 M, (TERM.) GREY
|
Siemens
|
|
A5E03914853
|
CABLE 25 M, (M12) GREY
|
Siemens
|
|
A5E03915057
|
CABLE 75 M, (TERM.) BLUE (EX)
|
Siemens
|
|
A5E03914856
|
CABLE 50 M, (TERM.) GREY
|
Siemens
|
|
A5E03915074
|
CABLE 75 M, (M12) BLUE (EX)
|
Siemens
|
|
A5E03915088
|
CABLE 150 M, (M12) BLUE (EX)
|
Siemens
|
|
A5E03914859
|
CABLE 50 M, (M12) GREY
|
Siemens
|
|
A5E03915100
|
CABLE 150 M, (TERM.) BLUE (EX)
|
Siemens
|
|
A5E03914861
|
CABLE 75 M, (M12) GREY
|
Siemens
|
|
A5E03914864
|
CABLE 75 M, (TERM.) GREY
|
Siemens
|
|
A5E03914873
|
CABLE 150 M, (TERM.) GREY
|
Siemens
|
|
A5E03915258
|
SPAREPART SITRANS FCT030 SENSORFLASH 1 GB MICRO SD CARD
|
Siemens
|
|
A5E03914874
|
CABLE 150 M, (M12) GREY
|
Siemens
|
|
A5E03916619
|
7ML56606JG110HBY-Z,Y01,2000MM, X=Y02=500MM ACTIVE SHIELD PROCESS CONN: DN 100,PN 16 Y01=2000MM WITH THERMAL ISOLATORPROCESS CONN: TEMPERATURES OVER +85 C (+185 F) FFKM (FOR PROCESS TEMPERATURES ABOVE -20 C (-4 F))316L SS WITH PFA LINING AND PEEK ISOLATORS APPROVALS GENERAL PURPOSE (CSA, FM)ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65, Y02=500MM ADD Z TO ORDER NO.AND SPECIFY ORDER CODES(S) Y01=2000MM TAG INFO TBD CERTIFICATES MANUFACTURERS TEST CERTIFICATE: M TO DIN 55350,PART 18 AND TO ISO 9000
|
Siemens
|
|
A5E03914945
|
CABLE 5 M, (TERM.) BLUE (EX)
|
Siemens
|
|
A5E03916700
|
7ML57474CB241AAX-Z,Y01, Y01=5000MM ELECTRONICS NAMUR SIGNAL APPROVAL ATEX II 1G, 1/2G, 2G EEX IA IIC T6 + WHG PROCESS CONNECTION/MATERIAL FLANGE DN50 PN40 FORM C, DIN 2501 / 316L Y01=5000MM
|
Siemens
|
|
A5E03914929
|
CABLE 5 M, (M12) BLUE (EX)
|
Siemens
|
|
A5E03474347
|
HMI NET PANEL 46 SPARE PART, FAN CABLE HARNESS
|
Siemens
|
|
A5E03918242
|
7ML54310XX201FC0,C11,C12, C20,2150LB RF. PROCESS CONNECTION AND ANTENNA MATERIAL:316L (1.4435 OR 1.4404)STAINLESS STEEL,PTFE EMITTER, FKM SEAL. FLANGED CONNECTIONS 316L: 2 CLASS 150 ASME B16.5, RAISED FACE COMMUNICATION:4-20MA HART, START-UP AT <,3.6MA. ENCLOSURE (WITH CABLE INLETS):ALUMINUM, EPOXY PAINT, 2 X M20 X 1.5 ANTENNA:2 HORN WITH 100 MM EXTENSION. APPROVALS:INTRIN- SICALLY SAFE:IECEX/ATEX II 1 GD EX IA IIC T4,(I.S.BARRIER REQUIRED)R&TTE, C-TICK, INMETRO BR-EX IA IIC T4 PRESSURE RATING:RATING PER PRESSURE/TEMPERATURE CURVES
|
Siemens
|
|
A5E03919309
|
SPARE, PCB-LC500 PTA0108
|
Siemens
|
|
A5E03476472
|
SITRANS FST020 DEMO KIT (SENSORS NOT INCLUDED)
|
Siemens
|
|
A5E03478951
|
SITRANS FUE950 ACCESSORY: EXPERT VERSION OF PROGRAMMING SOFTWARE TOOL FOR FUE950 (7ME348 TYPES ONLY)
|
Siemens
|
|
A5E03923984
|
7ML56523DG000DB2-Z,Y01=1180MM PROCESS CONNECTION G 1 1/2 ((BSPP), EN ISO 228-1/PF (JIS-P), JIS B 0202) LENGTH: EXTENDED ROD, FACTORY ADJUSTED LENGTH 750 TO 999 MM (29.53 TO 39.3) WETTED SEALS: GRAPHITE PROBE MATERIAL 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS FLAMEPROOF ENCLOSURE WITH IS PROBE, ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65 ACTIVE SHIELD LENGTH EXTENDED SHIELD - (400 MM THREADED, 380 MM FLANGED) INSERTION LENGTH Y01=1180MM
|
Siemens
|
|
A5E03922773
|
SITRANS FC430 OP INSTR CN
|
Siemens
|
|
A5E03923922
|
7ML56523DG000DB2-Z,Y01=1380MM PROCESS CONNECTION G 1 1/2 ((BSPP), EN ISO 228-1/PF (JIS-P), JIS B 0202) LENGTH: EXTENDED ROD, FACTORY ADJUSTED LENGTH 750 TO 999 MM (29.53 TO 39.3) WETTED SEALS: GRAPHITE PROBE MATERIAL 316L STAINLESS STEEL WITH CERAMIC ISOLATORS APPROVALS: FLAMEPROOF ENCLOSURE WITH IS PROBE, ENCLOSURE AND LID ALUMINUM EPOXY COATED 2 X M20 X 1.5 CABLE INLET, IP65 ACTIVE SHIELD LENGTH EXTENDED SHIELD - (400 MM THREADED, 380 MM FLANGED) INSERTION LENGTH Y01=1380MM
|
Siemens
|
|
A5E03480917
|
7ML13012AA223EC0,195CM, LIQUID PENETRANT MODEL: COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 195CM O-RINGS: NONE PROCESS CONNECTION: 3 600LB ASME RAISED FACE FLANGE C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 C18: MANUFACTURERS TEST REPORT (HYDROSTATIC TEST) D07: NACE Y15 TAG PROVIDED EXTRAS: LIQUID PENETRANT TEST CERTIFICATE
|
Siemens
|
|
A5E03482920
|
7ML54130JB201BA0,C12,Y15 ANTENNA MATERIAL: PTFE PROCESS CONNECTION: 6 ASME, 150 LB, FLAT FACED EXTENSIONS / SHIELD: 100 MM (4) EXTENSION, PTFE PROCESS SEAL: INTEGRAL GASKET DISPLAY/CABLE INLET:LUI/M20 COMMUNICATION: PA,MODBUS APPROVALS: GP, CE, CSA PRESSURE RATING: RATING PER PRESSURE/TEMPERATURE CURVES IN INSTRUCTION MANUAL C12 3.1 CERTIFICATE Y15 59EF-LIT-0001
|
Siemens
|
|
A5E03480916
|
7ML13012AA223EC0,135CM, LIQUID PENETRANT MODEL: COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 135CM O-RINGS: NONE PROCESS CONNECTION: 3 600LB ASME RAISED FACE FLANGE C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 C18: MANUFACTURERS TEST REPORT (HYDROSTATIC TEST) D07: NACE Y15 TAG PROVIDED EXTRAS: LIQUID PENETRANT TEST CERTIFICATE
|
Siemens
|
|
A5E03483084
|
LR250 WITH 4300LB RF,NACE MR 0 175 PC MATERIAL: 316L (1.4435 OR 1.4404) STAINLESS STEEL, PTFE EMITTER SEAL: FKM PROCESS CONNECTION: 4 ASME, 300 LB, RAISED FACED COMMUNICATION: 4-20MA HART, START-UP AT <,3.6MA CABLE INLET: ALUMINUM, EPOXY PAINT, 2 X 1/2 NPT ANTENNA: 4 HORN (FITS 4 ASME OR DN 100 NOZZLES) APPROVALS: CSA/FM CLASS I, II AND III,DIV.1,GR.A-G,FCC,C-TICK PRESSURE RATING: 0.5 BAR (7.5 PSI G) MAXIMUM CERTIFICATE: FLANGE CONFORMS TO NACE MR 0 175, Y15
|
Siemens
|
|
A5E03488620
|
LR200 WITH 300MM SHIELDED ROD MLFB: 7ML54231MAX13CE0, X=300MM SS SHIELD ANTENNA MATERIAL- PTFE-USES ANTENNA ADAPTER AND ADDITIONAL PROCESS CONNECTION BELOW PROCESS CONNECTION- 2 NPT ((TAPER), ANSI/ASME B1.20.1) ANTENNA EXTENSIONS-300 MM 316L STAINLESS STEEL SHIELD PROCESS SEAL/GASKET-FKM O-RING ENCLOSURE/CABLE INLET- ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5 COMMUNICATION/OUTPUT 4-20MA HART, START-UP AT <,3.6MA APPROVAL CSA CLASS I AND II, DIV I, GROUPS A, B, C, D, G, 6.3 GHZ
|
Siemens
|
|
A5E03481975
|
HMI NET PANEL 46 SPARE PART, AUDIO MODULE NETPANEL
|
Siemens
|
|
A5E03937972
|
LIGHT SOURCE INCLUDING ADAPTER FOR SITRANS SL (SPARE PART FOR SENSOR ALIGNMENT KIT)
|
Siemens
|
|
A5E03489541
|
CAN-CONTROLLER PCI
|
Siemens
|
|
A5E03932516
|
SIPLUS READY CP 342-5 BASED ON 6GK7342-5DA03-0XE0 COMMUNICATION PROCESSOR CP342-5 FOR CONNECTING SIMATIC S7-300 TO PROFIBUS, DP, S5 COMPATIBLE, PG/OP AND S7 COMMUNICATION
|
Siemens
|
|
A5E03933099
|
7ML57312AX161CA0-Z, X=G 1 1/2 CLASS A,Y01=1500 MM: POWER SUPPLY: 19 TO 230 V AC, 19 TO 55 V DC, TWO RELAY OUTPUTS (DPDT).PROCESS TEMPERATURE: WITHOUT TEMPERATURE ISOLATOR PROCESS CONNECTION:1-1/2G CLASS A (EN ISO 228-1) EXTENSION LENGTH Y01=1500MM MATERIAL PROCESS CONNECTION/ EXTENSION STAINLESS STEEL 304 (1.4301).APPROVALS:CSA/FM GENERAL PURPOSE, C-TICK FURTHER DESIGNS: PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S). Y01=1500MM
|
Siemens
|
|
A5E03938154
|
7ML13031JD111EA0-Z,Y01=50CM SITRANS LG200 SINGLE ROD RIGID PROBES 2 TO 6 OF A METAL TANK WALL OR IN CAGE OR BRIDLE: SINGLE ROD RIGID PROBE MATERIAL OF CONSTRUCTION: PFA ROD INSULATION (316 SS ROD AND PROCESS CONNECTION) PROCESS CONNECTION(SIZE/TYPE): DN 50, PN 16, DIN 2527 FORM B FLANGE O-RING: VITON. PROBE INSERTION LENGTH:Y01=50CM FURTHER DESIGNS PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S). ENTER THE TOTAL INSERTION LENGTH IN PLAIN TEXT DESCRIPTION, MAX. 610 CM
|
Siemens
|
|
A5E03934184
|
LR260 ENCLOSURE WITH BOARD STACK, HART COMMUNICATION, NPT CABLE INLET, APPROVAL OPTION D, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03938155
|
MILLTRONICS MLC BELT SCALE: MLFB: 7MH71262XB1, WHERE X=60 SS ROLLER BELT WIDTH (A DIMENSION) 60 (1524 MM) LOAD CELL CAPACITY 20 LB (9.09 KG) WEIGHING IDLER DIMENSIONS 1.96 (50 MM) CALIBRATION WEIGHT 10.4LB (4.7KG) B DIMENSION: 62 (1574 MM) PER DRAWING SUPPLIED
|
Siemens
|
|
A5E03934187
|
LR260 ENCLOSURE WITH BOARD STACK, HART COMMUNICATION, NPT CABLE INLET, APPROVAL OPTION E, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03939114
|
SPAREPART SITRANS FCT030 I/O CASSETTE QUOTE FNN OPTION FROM PRODUCT CODE
|
Siemens
|
|
A5E03939194
|
7ML5517-2CXX1-2AA1, XX=DN50 TRI CLAMP INVERSE FREQUENCY SHIFT CAPACITANCE LEVEL AND INTERFACE TRANSMITTER FOR EXTREME AND CRITICAL PROC 2001 TO 3000 MM (78.78 TO 118.11) 2) AND 4) DN50 SANNITARY FITTING CLAMP GENERAL PURPOSE 2 X M20 X 1.5 (IP68, ADAPTER) WITHOUT THERMAL ISOLATOR OR REMOTE ELECTRONICS 2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2 _3300 PF) Y01 = 2400MM Y02 = 125MM
|
Siemens
|
|
A5E03934191
|
LR260 ENCLOSURE WITH BOARD STACK, HART COMMUNICATION, M20 CABLE INLET, APPROVAL OPTION F, NO PROCESS CONNECTION
|
Siemens
|
|
A5E03490114
|
7ML55170AC241AA1,CRYOGENIC VERSION: Y01 = 600MM, 16MM PFA INSULATED ROD PROCESS CONNECTION: 2 ASME 300LB FLANGE, SINGLE PIECE FLANGE, RAISED FACE APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLSOURE/CABLE INLET: 2 X 1/2 NPT IP68 OPTIONS: NONE THERMAL ISOLATOR: PROVIDED WITH THERMAL ISOLATOR ELECTRICAL OUTPUT: 2-WIRE LOOP CURRENT 4 TO 20 MA (TRANSMITTER MSP2002-2_3300 PF) Y02: 50MM EXTRAS: CRYOGENIC TEST CERT. (TESTED IN LIQUID NITROGEN AT -196 C) PROVIDED
|
Siemens
|
|
A5E03937971
|
LIGHT SOURCE INCLUDING ADAPTER FO CD6 (SPARE PART FOR SENSOR ALIGNMENT KIT)
|
Siemens
|
|
A5E03496569
|
NAMUR ISOLATED SWITCH AMPLIFIER RELAY OUTPUT KFD2-SR2-EX1.W
|
Siemens
|
|
A5E03494175
|
7ML55150AD04XAA1,X=SS ENCL., Y01=300MM VERSION: Y01 = 300MM, ROD 16MM, PFA INSULATED PROCESS CONNECTION: 2 NPT (TAPER), ANSI/ASME B1.20.1 APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLOSURE: X = STAINLESS STEEL 2 X 1/2 NPT, IP68 OPTIONS: NONE THERMAL ISOLATOR: WITHOUT THERMAL ISOLATOR ELECTRONIC OUTPUT: 2-WIRE LOOP CURRENT 4 TO 20 MA (TRANSMITTER MSP2002-2 3300 PF) Y02: 50MM CERTIFICATES: C11 - C12 Y15 TAG
|
Siemens
|
|
A5E03490133
|
7ML56506JX100JB0,X=1325MM, C11,Y15 PROCESS CONNECTION: DN100 PN16,WELDED FLANGE, 316LSS, TYPE A FLAT FACED PROBE LENGTH: X = 1325MM, EXTENDED ROD LENGTH THERMAL ISOLATOR: WITH THERMAL ISOLATOR FOR PROCESS CONNECTION TEMP. OVER +85C WETTED SEALS: FKM PROBE MATERIAL: 316L SS WITH PFA LINING AND PEEK ISOLATORS APPROVALS: GP (CE, C-TICK) ENCLOSURE: ALUMINUM EPOXY COATED 2XM20X1.5 CABLE INLET, IP65 ACTIVE SHIELD LENGTH:105MM CERTIFICATES: C11 Y15 TAG:
|
Siemens
|
|
A5E03495359
|
7ML55171AC241AA1,CRYOGENIC VERSION: Y01 = 1100MM, 16MM PFA INSULATED ROD PROCESS CONNECTION: 2 ASME 300LB FLANGE, SINGLE PIECE FLANGE, RAISED FACE APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLSOURE/CABLE INLET: 2 X 1/2 NPT IP68 OPTIONS: NONE THERMAL ISOLATOR: PROVIDED WITH THERMAL ISOLATOR ELECTRICAL OUTPUT: 2-WIRE LOOP CURRENT 4 TO 20 MA (TRANSMITTER MSP2002-2 _3300 PF) Y02: 50MM CRYOGENIC TEST CERTIFICATE
|
Siemens
|
|
A5E03497926
|
LR200 FLANGED HORN VERSION, PFA COATED PROCESS CONNECTION ANTENNA MATERIAL - (USES ANTENNA ADAPTER) PFA COATED 316L STAINLESS STEEL WITH PTFE CONE EMITTER AND PURGE CONNECTION WITH 1/8 NPT INLET PROCESS CONNECTION DN 200 PN 16, TYPE A, FLAT FACED COMMUNICATION/OUTPUT 4-20MA HART, START-UP AT <,3.6MA PROCESS SEAL/GASKET FKM (-40 TO +200 C) ENCLOSURE/CABLE INLET ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5 HORN/WAVEGUIDE-200MM(8)HORN APPROVAL GP, CE PRESSURE-0.5BAR(7.25PSI) MAX
|
Siemens
|
|
A5E03498053
|
7ML5513XXL062BA1,XX=20M VERSION: XX = 20,000MM PFA INSULATED CABLE, WEIGHTED PROCESS CONNECTION: G 1.5 ((BSPP), EN ISO 228-1/PF (JIS-P), JIS B 0202) APPROVALS: FM CLASS I, DIV. 1, GROUPS A, B, C, D,T4 ENCLOSURE/CABLE INLET: 2 X M20 X 1.5 (IP68, ADAPTER) OPTIONS: WITH MOUNTING EYE (TO FIX THE CABLE SENSOR STRAIGHT) THERMAL ISOLATOR: WITHOUT THERMAL ISOLATOR OR REMOTE ELECTRONICS ELECTRONIC OUTPUT: 2-WIRE LOOP CURRENT 4 TO 20MA (TRANSMITTER MSP2002-2_ 3300 PF)
|
Siemens
|
|
A5E03498071
|
7ML57345AF121FA0,WITH FORK PROTECT,2260MM POWER SUPPLY: 7 TO 9 V DC (REQUIRES NAMUR SWITCH AMPLIFIER) NAMUR IEC 60947-5-6. 2-WIRE PROCESS TEMPERATURE: UP TO +80 C (+176 F) PROCESS CONNECTION: FLANGED: 3 ASME 150 LBS B16.5 (1.4541/321) EXTENSION LENGTH: 2000MM APPLICATION TYPE: DRY BULK SOLIDS (125 HZ) APPROVALS: ATEX II 1G AND 1/2G EEX IA IIC, ATEX II 1D AND 1/2D, C-TICK EXTRAS: PROVIDED WITH FORK PROTECTION
|
Siemens
|
|
A5E03498070
|
7ML57345AF111FA0, WITH FORK PROTECT, 2000MM POWER SUPPLY: 7 TO 9 V DC (REQUIRES NAMUR SWITCH AMPLIFIER) NAMUR IEC 60947-5-6. 2-WIRE PROCESS TEMPERATURE: UP TO +80 C (+176 F) PROCESS CONNECTION: FLANGED: 3 ASME 150 LBS B16.5 (1.4541/321) EXTENSION LENGTH: 2000MM APPLICATION TYPE: DRY BULK SOLIDS (125 HZ) APPROVALS: ATEX II 1G AND 1/2G EEX IA IIC, ATEX II 1D AND 1/2D, C-TICK EXTRAS: PROVIDED WITH FORK PROTECTION
|
Siemens
|
|
A5E03498072
|
7ML57345AF121FA0,WITH FORK PROTECT,2520MM POWER SUPPLY: 7 TO 9 V DC (REQUIRES NAMUR SWITCH AMPLIFIER) NAMUR IEC 60947-5-6. 2-WIRE PROCESS TEMPERATURE: UP TO +80 C (+176 F) PROCESS CONNECTION: FLANGED: 3 ASME 150 LBS B16.5 (1.4541/321) EXTENSION LENGTH: 2000MM APPLICATION TYPE: DRY BULK SOLIDS (125 HZ) APPROVALS: ATEX II 1G AND 1/2G EEX IA IIC, ATEX II 1D AND 1/2D, C-TICK EXTRAS: PROVIDED WITH FORK PROTECTION
|
Siemens
|
|
A5E03495456
|
705-530A-A11, ECLIPSE TRANSMITTER. HOUSING: ALUMINUM, (2) M20 X 1.5 CONDUIT CONNECTIONS GP/IS (ATEX II EEX IA IIC T4) POWER SUPPLY: 9-32 VDC (17 MA MAXIMUM CURRENT DRAW) OUTPUT SIGNAL: PROFIBUS PA TRANSMITTER MOUNTING:INTEGRAL
|
Siemens
|
|
A5E03495457
|
7MR-A110-089 - GUIDED WAVE RADAR RIGID OVERFILL SERVICE PROBE
|
Siemens
|
|
A5E03495458
|
X7MR-A220-082 - GUIDED WAVE RADAR RIGID OVERFILL SERVICE PROBE. X = 2 G BSPP
|
Siemens
|
|
A5E03499382
|
SIMATIC IPC, SPAREPART BACK LIGHT CONTROLLER 21,5 LG X 1 FOR SIMATIC IPC477D
|
Siemens
|
|
A5E03496532
|
7ML56031AA141AA0,CRYOGENIC ELECTRONIC TRANSMITTER: MSP2002-1 (330 PF) PROCESS CONNECTION: 2 ASME, 150LB SINGLE PIECE RAISED FACED FLANGE, 316L SS PROBE INSULATION: PFA INSULATION APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6...T1 PROBE/ELECTRODE DIAMETER: 16MM (0.63) RIGID ROD, Y01 = 350MM, Y02 = 100MM THERNAL ISOLATOR: PROVIDED WITH RIGID THERMAL ISOLATOR EXTRAS: PROVIDED WITH CRYOGENIC TEST CERTIFICATE
|
Siemens
|
|
A5E03941183
|
SITRANS LG200 COAXIAL PROBES 7ML13013AB123KH0,C12,C18,Y01 =100CM,XX=DN80 PN400 TYPE B2 FURTHER DETAILS CAN BE FOUND ON THE CORRESPONDING BUDGETARY ESTIMATE PREVIOUSLY PROVIDED BY THE CEG TO THE REGION. PLEASE TAKE SPECIAL CONSIDERATION OF THE REVISION NUMBER.
|
Siemens
|
|
A5E03942764
|
7ML13011AA112AA0-Z,Y01=55CM MODEL COAXIAL MATERIAL OF CONSTRUCTION 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH Y01=55CM O-RINGS EPDM (ETHYLENE PROPYLENE RUBBER) PROCESS CONNECTION (SIZE/TYPE) 3/4 NPT ((TAPER), ANSI/ASME B1.20.1) FURTHER DESIGNS PLEASE ADD -Z TO ORDER NO. AND SPECIFY ORDER CODE(S). Y01=55CM
|
Siemens
|
|
A5E03505030
|
MICROMASTER 4 REPAIR PART WLX_999999 CABLE HOLDER MM4 FSD436 / FSE-F
|
Siemens
|
|
A5E03502112
|
MSI,CUSTOM,2007MM DYNAMIC BEAM,2248MM STATIC BEAM CUSTOM MSI, EPOXY POWDER COATED MILD STEEL, 2007MM DYNAMIC BEAM AND 2248MM STATIC BEAM, 1500 LBS LOADCELLS, STANDARD DUTY, WITH MWL FLATBAR CALIBRATION WEIGHT BRACKETS, NO HANGER BRACKETS JC26739KE FOR DIMENSIONS
|
Siemens
|
|
A5E03501207
|
MSI,CUSTOM,BW=1800MM,A=2230MM, 1500LB LOADCELL SIMILAR TO 7MH7122-2CV81-1A CUSTOM MSI WITH SPECIAL IDLER MOUNTING PLATES AND SPECIAL HANGER BRACKETS TO FIT SPECIAL IDLERS AND CONVEYOR SIDERAIL CONFIGURATION 1800MM BELT WIDTH, CLOSE TO 79 BW MSI CONFIGURATION, EPOXY POWDERCOATED MILD STEEL 1500 LBS LOADCELLS, HAZARDOUS DUTY 50M LOADCELL CABLE
|
Siemens
|
|
A5E03506690
|
7ML5517XXXX4XAX1,XX=1 150LB, CRYOGENIC VERSION: XX = Y01 = 170MM,16MM PFA INSUL. ROD Y02 = 50MM PROCESS CONNECTION (316L SS): XX = 1 ASME, 150 LB, SINGLE PIECE RFF APPROVALS: ATEX II 1/2 GD EEX D (IA) IIC T6 TO T1 ENCLOSURE/CABLE INLET: X = STAINLESS STEEL ENCLOSURE, 2 X 1/2 NPT IP68 OPTIONS: NONE THERMAL ISOLATOR: PROVIDED WITH THERMAL ISOLATOR (ARGON FILLED) ELECTRONIC OUTPUT: X = TRANSMITTER MSP2002-1_330 PF CERTIFICATES: PROVIDED WITH CRYOGENIC TEST CERTIFICATE
|
Siemens
|
|
A5E03502175
|
7ML5425XDA213CE1,X=1300MM SLIDING WAVEGUIDE ANTENNA MATERIAL: SLIDING WAVEGUIDE SYSTEM WITH 1300 MM WAVEGUIDE PROCESS CONNECTION DN 150 PN 16, TYPE A, FLAT FACED COMMUNICATION/OUTPUT 4-20MA HART, START-UP AT <,3.6MA PROCESS SEAL/GASKET NITRILE (-40 TO +100 C), SLIDING WAVEGUIDE SYTEMS ONLY ENCLOSURE/CABLE INLET ALUMINUM, EPOXY PAINTED, 2 X M20 X 1.5, SIEMENS LUI INTERFACE HORN SIZE/WAVEGUIDE OPTIONS 100 MM (4) HORN, FOR STILLPIPE APPLICATIONS ONLY APPROVAL ATEX II 1 G EEX IA IIC T4, IS WITH BARRIER
|
Siemens
|
|
A5E03506940
|
MWL,7MH7218-1CE111, SPECIAL HANDLE MWL FOR FLAT BAR CALIBRATION WEIGHTS, BW = 1624MM A = 1854MM SPECIAL 357MM LONG CRANK HANDLE REFER TO CUSTOMER DWG JC26739KE FOR DIMENSIONS
|
Siemens
|
|
A5E03506989
|
7ML13032AXX21AC0,XX=DN80 PN25/40 FORM E MODEL: HIGH TEMPERATURE/ HIGH PRESSURE SINGLE ROD MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROCESS CONNECTION: XX = DN80 PN25/40, EN1092 FORM E (SPIGOT FACE), 316 SS O-RING: AEGIS PF 128 PROBE INSERTION LENGTH: Y01 = 300CM, PROBE PROVIDED IN 3 SECTIONS CERTIFICATES:C12 -ACCEPTANCE CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN10204 APPLICATION DETAILS: PROCESS PRESSURE: 1 - 24BAR PROCESS TEMP:-40 C TO 60 C
|
Siemens
|
|
A5E03539981
|
7ML56306AX000CB0-Z, Y01-113MM,C11,Y15 PROCESS CONNECTION: WELDED FLANGE,316L STAINLESS STEEL, TYPE A FLAT FACED,DN25,PN16 PROBE LENGTH: Y-01-113MM THERMAL ISOLATOR: WITHOUT THERMAL ISOLATOR WETTED SEALS: FKM PROBE MATERIAL:316L STAINLESS STEEL WITH PPS PROBE BODY APPROVALS:DUST IGNITION PROOF, CE, C-TICK, ATEX II 1/2 D T100 ENCLOSURE AND LID ALUMINUM: EPOXY COATED 2XM20X1.5 CABLE INLET, IP65 STAINLESS STEEL TAG (69 MMX50 MM (2.71X1.97)) CERTIFICATES:MANUFACTURERS TEST CERT M TO DIN
|
Siemens
|
|
A5E03989070001
|
KIT, SPARE, AIR INLET MANIFOLD
|
Siemens
|
|
A5E03989098001
|
KIT, SPARE, I/O BRACKET
|
Siemens
|
|
A5E03989451001
|
KIT, SPARE, SINGLE MODULE COVER
|
Siemens
|
|
A5E03989426001
|
KIT, SPARE, LARGE OVEN DOOR
|
Siemens
|
|
A5E03989574001
|
KIT, SPARE, DOUBLE MODULE COVER
|
Siemens
|
|
A5E03989448001
|
KIT, SPARE, SMALL OVEN DOOR
|
Siemens
|
|
A5E03989577001
|
KIT, SPARE, CIM REPLACEMENT CABLES
|
Siemens
|
|
A5E03540075
|
7ML13012AE323XX0,XX=DN80 PN25/40 FORM B1 MODEL:COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 300 CM O-RINGS: NONE PROCESS CONNECTION: XX = DN80, PN25/40 EN1092-1 FORM B1 Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03548971
|
SPAREPART SITRANS FCT030 DISPLAY AND KEYPAD
|
Siemens
|
|
A5E03545924
|
MA500 - 7MH71164AA1
|
Siemens
|
|
A5E03549098
|
SPAREPART SITRANS FCT030 REMOTE VERSION SENSOR INTERFACE CASSETTE
|
Siemens
|
|
A5E03540076
|
7ML13012AE323XX0,XX=DN80 PN25/40 FORM B1 MODEL:COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 280 CM O-RINGS: NONE PROCESS CONNECTION: XX = DN80, PN25/40 EN1092-1 FORM B1 Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03540077
|
7ML13031AD211XX0,XX=DN50 PN25/40 FORM B1 MODEL: SINGLE ROD RIGID PROBE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 150 CM O-RINGS: VITON PROCESS CONNECTION: DN 50, PN 25/40, DIN 2527 FORM B FLANGE Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03540078
|
7ML13012AE523XX0,XX=DN80 PN25/40 FORM B1 MODEL:COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 450 CM O-RINGS: NONE PROCESS CONNECTION: XX = DN80, PN25/40 EN1092-1 FORM B1 Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03549142
|
SPAREPART SITRANS FCT030 COMPACT VERSION SENSOR INTERFACE CASETTE
|
Siemens
|
|
A5E03540123
|
7ML13012AE423XX0,XX=DN80 PN25/40 FORM B1 MODEL: COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 360 CM O-RINGS: NONE PROCESS CONNECTION: XX = DN80, PN25/40 EN1092-1 FORM B1 Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03549191
|
SPAREPART SITRANS FCS400 REMOTE VERSION DSL CASSETTE
|
Siemens
|
|
A5E03540127
|
7ML13023AE321XX0,XX=DN80 PN25/40 FORM B1 MODEL:FLEXIBLE TWIN ROD PROBE MATERIAL OF CONSTRUCTION: 316/316L (1.4401/1.4404) STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 1000 CM O-RINGS: AEGIS PF128 PROCESS CONNECTION: XX = DN80, PN25/40 EN1092-1 FORM B1 Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03549295
|
SPAREPART SITRANS FCT030 BLIND LID SMALL (85 MM)
|
Siemens
|
|
A5E03540128
|
7ML13012AE523XX0,XX=DN80 PN25/40 FORM B1 MODEL:COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 460 CM O-RINGS: NONE PROCESS CONNECTION: XX = DN80, PN25/40 EN1092-1 FORM B1 Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03549313
|
SPAREPART SITRANS FCS400 SENSOR HOUSING METRIC
|
Siemens
|
|
A5E03549324
|
SPAREPART SITRANS FCS400 BAG OF LOOSE PARTS FOR SENSOR
|
Siemens
|
|
A5E03540129
|
7ML13012AE223XX0,XX=DN80 PN25/40 FORM B1 MODEL:COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 160 CM O-RINGS: NONE PROCESS CONNECTION: XX = DN80, PN25/40 EN1092-1 FORM B1 Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03549357
|
SPAREPART SITRANS FCT030 TRANSMITTER CASSETTE HART (ACTIVE)
|
Siemens
|
|
A5E03540130
|
7ML13012AE423XX0,XX=DN100 PN25/40 FORM B1 MODEL:COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 350 CM O-RINGS: NONE PROCESS CONNECTION: XX = DN100, PN25/40 EN1092-1 FORM B1 Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03549344
|
SPAREPART SITRANS FCT030 DISPLAY LID
|
Siemens
|
|
A5E03549383
|
SPAREPART SITRANS FCT030 TRANSMITTER CASSETTE HART (PASSIVE)
|
Siemens
|
|
A5E03540131
|
7ML13012AA211XX0,XX=DN50 PN25/40 FORM B1 MODEL:COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 150 CM O-RINGS: VITON PROCESS CONNECTION: XX = DN50, PN25/40 EN1092-1 FORM B1 Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03540132
|
7ML13012AE323XX0,XX=DN80 PN25/40 FORM F MODEL: COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 300 CM IN 3 SECTIONS O-RINGS: NONE PROCESS CONNECTION: XX = DN80, PN25/40 EN1092-1 FORM F Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03549396
|
SPAREPART SITRANS FCT030 BAG OF LOOSE SPARE PARTS
|
Siemens
|
|
A5E03544585
|
7ML13012AE223XX0,XX=DN80 PN25/40 FORM B1 MODEL:COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 200 CM O-RINGS: NONE PROCESS CONNECTION: XX = DN80, PN25/40 EN1092-1 FORM B1 Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03549413
|
SPAREPART SITRANS FCT030 POWER SUPPLY 85-264 V AC (50/60 HZ) 18.5-100 V DC
|
Siemens
|
|
A5E03545074
|
7ML13012AE223XX0,XX=DN80 PN25/40 FORM B1 MODEL:COAXIAL, HIGH TEMPERATURE/HIGH PRESSURE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 165 CM O-RINGS: NONE PROCESS CONNECTION: XX = DN80, PN25/40 EN1092-1 FORM B1 Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03545275
|
7ML13031AD211XX0,XX=DN50 PN25/40 FORM B1 MODEL: SINGLE ROD RIGID PROBE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 200 CM O-RINGS: VITON PROCESS CONNECTION: DN 50, PN 25/40, DIN 2527 FORM B FLANGE Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03549429
|
SPAREPART SITRANS FCT030 BLIND LID LARGE (122 MM)
|
Siemens
|
|
A5E03990228001
|
KIT, SPARE, TOUCH SCREEN ASSEMBLY
|
Siemens
|
|
A5E03545338
|
7ML13031AD411XX0,XX=DN80 PN25/40 FORM B1 MODEL: SINGLE ROD RIGID PROBE MATERIAL OF CONSTRUCTION: 316/316L STAINLESS STEEL PROBE AND PROCESS CONNECTION PROBE INSERTION LENGTH: Y01 = 280 CM O-RINGS: VITON PROCESS CONNECTION:DN 80, PN 25/40, DIN 2527 FORM B FLANGE Y15: SS TAG C12: ACCEPTANCE TEST CERTIFICATE B TO DIN 50049 SECTION 3.1 AND EN 10204
|
Siemens
|
|
A5E03990569001
|
KIT, SPARE, DOOR ASSEMBLY W/ CIM
|
Siemens
|
|
A5E03990603001
|
KIT, HEATER REPLACEMENT, SM MODULAR OVEN
|
Siemens
|
|
A5E03990607001
|
KIT, HEATER REPLACEMENT, LG MODULAR OVEN
|
Siemens
|
|
A5E03990579001
|
KIT, SPARE, 2-STATION SVCM, SMALL OVEN
|
Siemens
|
|
A5E03990609001
|
KIT, RTD REPLACEMENT, MODULAR OVEN
|
Siemens
|
|
A5E03990581001
|
KIT, SPARE, 4-STATION SVCM, LARGE OVEN
|
Siemens
|
|
A5E03990615001
|
KIT, SAMPLE IN/OUT BRACKET ASSEMBLY
|
Siemens
|
|
A5E03990587001
|
KIT, SPARE, DIN RAIL
|
Siemens
|
|
A5E03990623001
|
KIT, ISTCD BEAD WIRE HARNESS (NON-FLOAT)
|
Siemens
|
|
A5E03551046
|
SINAMICS S120 COMPACTFLASH CARD W/O PERFORMANCE EXTENSION INCLUDING CERTIFICATE OF LICENCE V4.04
|
Siemens
|
|
A5E03990594001
|
KIT, POWER & GROUND CABLES, MODULAR OVEN
|
Siemens
|
|
A5E03553072
|
7ML54260BX100AA0,1000MM WAVEGUIDE PURGED PROCESS CONNECTION: 4/100 MM ANTENNA: 4 HORN ANTENNA, FITS 100 MM OR 4 NOZZLES WITH 1000 MM EXTENSION PURGE (SELF CLEANING): CONNECTION PURGE CONNECTION OUTPUT / COMMUNICATION: 4 TO 20 MA, HART POWER SUPPLY / CABLE INLET: 100 TO 230 V AC, 2XM20X1.5 APPROVALS GENERAL PURPOSE, CSA US/C, INDUSTRY CANADA, FCC, CE, R&TTE
|
Siemens
|
|
A5E03990623002
|
KIT, ISTCD BEAD WIRE HARNESS (FLOAT)
|
Siemens
|
|
A5E03553121001
|
LUBRICANT, OIL, KRYTOX 143 AB
|
Siemens
|
|
A5E03557399
|
7ML54260CX100CA0,X=4, 1000MM WG PURGED PROCESS CONNECTION:6/150 MM ANTENNA 4 HORN ANTENNA, FITS 100 MM OR 4 NOZZLES WITH 1000 MM EXTENSION PURGE: (SELF CLEANING) CONNECTION PURGE CONNECTION OUTPUT / COMMUNICATION: 4 TO 20 MA, HART POWER SUPPLY/CABLE INLET: 24 V DC, 2 X M20 X 1.5 APPROVALS: GENERAL PURPOSE, CSA US/C, INDUSTRY CANADA, FCC, CE, R&TTE
|
Siemens
|
