2GA33

Артикул	Наименование	Производитель
2GA3375-1D	MAGNETIC POWDER BRAKE 1000 W WITH INTEGRATED CONTROL UNIT. WITH ELECTRONIC TORQUE LOAD CELL (STRAIN GAUGE). SPEED, TORQUE AN POWER INDICATION. OPERATION MODES: OPEN LOOP CON- TROLLED OPERATION AND AUTOMATIC MODE, ANALOG OUTPUTS FOR SPEED, TORQUE AND POWER. CHARACTERISTIC CURVES MAY BE RECORDED VIA A X-Y RECORDER. SERIAL INTERFACE FOR P.C. CON- NECTION. ANALOG INPUT 0-10V SUPPLY VOLTAGE 230 V/0,3 A, MAXIMUM SPEED 3000 RPM. MAX. TORQUE 30 NM, MAX. BRAKING POWER: 2 KW	Siemens
2GA3375-4A	THREE-PHASE SYNCHRONOUS MACHINE WITH SALIENT POLE ROTOR, 1000W- PROGR., GENERATOR OPERATION: 400/231V/50HZ MOTOR OPERATION:380/220V/50HZ, 1500MIN-1	Siemens
2GA3375-4C	THREE-PHASE SYNCHRONOUS MOTOR, NO EXITATION (RELUCTANCE MOTOR) 1000W.-PROGR., 380V STAR/50HZ/ 4.4A/1500MIN-1	Siemens
2GA3375-5B	DC COMPOUND WOUND MACHINE, 1000W-PROGR., 1500MIN-1 GENERATOR OPERATION: 1KW/220V/ 4.6A MOTOR OPERATION: 0.75KW/ 220V/4.4A	Siemens
2GA3375-1F	EDDY-CURRENT BRAKE 1000 W BREADING POWER AT: 1500 RPM: 1.1 KW 3000 RPM: 1.3 KW EXCITATION VOLTAGE: 0-180 V DC	Siemens
2GA3375-4B	THREE-PHASE SYNCHRONOUS MACHINE WITH DRUM TYPE ROTOR, 1000W-PROGR,GENERATOR OPERATION 400/231V/50HZ MOTOR OPERATION: 380/220V/50HZ, 1500MIN-1	Siemens
2GA3375-1G	DC DYNAMOMETER, RANGE 1000W, WITH MECHAN. TORQUE LOAD CELL 0 TO 20NM, 230V	Siemens
2GA3375-1H	DC DYNAMOMETER, 1 KW MOUNTED ON A BASEFRAME WITH A CRADLE-MOUNTED HOUSING WITH FITTED TACHOGENERATOR AND ELECTRONIC TORQUE LOAD ALL (STRAIN GAUGE) FORCED VENTILATED MACHINE WITH TEMPERATURE MONITOR MOUNTED COUPLING HALF AND COUPLING COVER POWER: 1.0 TO 2.0 KW VOLTAGE: DC 150V TO 300V SPEED: 1500 RPM TO 3000 RPM	Siemens
2GA3375-5A	DC SERIES WOUND MOTOR 1000W-PROGR., 220V/1500MIN-1	Siemens
2GA3375-1N	2GA3375-1N	Siemens
2GA3375-1M	2GA3375-1M	Siemens
2GA3375-5C	DC-SHUNT WOUND MACHINE 1000 W PROGRAM, 1500 RPM, GENERATOR OPERATION: 1KW/220V/ 4.4 A, MOTOR OPERATION:1KW/ 220 V/5.3A EXCITATION VOLTAGE/CURRENT: 160 V/ 0.5 A	Siemens
2GA3375-1P	CONTROL UNIT 1000W-PROGR. WITH TORQUE MEASUREMENT 0 TO 5/10/20NM,SPEED MEASURE- MENT 0 TO 1500/3000/6000 MIN-1, 220V/50HZ	Siemens
2GA3375-5D	DC SHUNT-WOUND MACHINE WITH TACHOGENERATOR, 1000W-PROGR. GENERATOR:800W/230V/1500MIN-1 MOTOR:1.2/1.0/0.8KW, 450/380/ 313V, 1800/1500/1200MIN-1	Siemens
2GA3375-1Q	2GA3375-1Q	Siemens
2GA3375-5E	1000W-DC SHUNT-WOUND MACHINE FOR MOTOR AND GENERATOR OPERA- TION WITH BUILT-ON TACHOGENE- RATOR, 1000MIN-1,20V	Siemens
2GA3375-1W	CONTROL UNIT, RANGE 1000W, WITH TORQUE MEASUREMENT 0 TO 5/ 10/20NM, SPEED MEASUREMENT 0 TO 2000/4000 MIN-1, 380V/220V/50HZ	Siemens
2GA3375-5V	SPECIAL DC COMPOUND MACHINE 1000W PROGRAM ARMATURE VOLTAGE / FIELD VOLT.: 220V / 220V SPEED 1500 MIN-1 WITH THE CHARACTERISTICS OF: SERIES, COMPOUND AND S-W MACHI.	Siemens
2GA3375-6D	TWO-QUADRANT CONVERTER WITHDRAWABLE UNIT TWO-QUADRANT CONVERTER CONSISTING OF A HALFCONTROLLED B2 BRIDGE POWER SUPPLY: AC 230V MAX. FIELD CURRENT 2.5A ELECTRICAL CONNECTIONS BROUGHT OUT TO 4MM SAFETY SOCKETS	Siemens
2GA3375-1X	DC TACHOGENERATOR WITH 2 SHAFT ENDS AT 1000 MIN -1 = +/- 30 V, 80 MA FOR THE 1000 W RANGE MACHINE PROGRAM	Siemens
2GA3375-6A	BASIC UNIT OF MODULAR CONTROL STATION, CONSISTING OF A COMPL. WIRED 19 HOUSING AND A WITHDRAWABLE UNIT ACTUAL VALVE INDICATION.WITHDRAWABLE UNIT HAS A LCD DISPLAY FOR THE SPEED AND CHOOSABL.F.TORQUE AND POWER WITH ANALOG INPUTS AND CONTROL CABLE FOR 200W AND 1000W MACHINES	Siemens
2GA3375-2C	THREE-PHASE INDUCTION MOTOR W. SLIPRING ROTOR, 1000W-PROGR. 1KW, 380/220V, 50HZ, 2.6A	Siemens
2GA3375-2A	THREE-PHASE SQUIRREL-CAGE INDUCTION MOTOR SUITABLE FOR STAR-DELTA STARTING,1000W-PROGR 1.1KW/380V/50HZ/2.8A/1410MIN-1	Siemens
2GA3375-6C	WITHDRAWABLE UNIT SPEED-/ TORQUE CONTROLLER WITH RAMP GENERATOR TO BE USED WITH BASIC UNIT 2GA33 75-6A FOR 200W OR 1000W MACHINES	Siemens
2GA3375-2B	THREE-PHASE TWO SPEED POLE- CHANGING INDUCTION MOTOR WITH SQUIRREL-CAGE ROTOR 1000W-PROGR (DAHLANDER CIRCUIT) 0.7/0.85KW/380V/50HZ/1.8/2.3A, 1390/2810MIN-1	Siemens
2GA3375-6E	WITHDRAWABLE UNIT FOR FOUR-QUAD CONVERTER CONSISTING OF 2 INVERSE-PARALLEL CONNECTED M3 CONVERTER BRIDGES WITH EXCITATION CONTROL UNIT TO BE USED WITH BASIC UNIT 2GA33 75-6A AND DC DYNAMOMETER 200W OR 1000W	Siemens
2GA3375-2D	ROTOR CONTROLLER 1000W-PROGRAMME	Siemens
2GA3375-2F	FLY WHEEL 1000W RANGE MAX. SPEED 3600 REV/MIN MOMENT OF INERTIA 0.25NM	Siemens
2GA3375-8B	CONTROLLER FOR THE THREE-PHASE INDUCTION MOTOR WITH SLIPERING ROTOR, 1000W-PROGRAMME	Siemens
2GA3375-6F	WITHDRAWABLE UNIT MEASUREM.AND CONTR. INTERFACE CONSISTING OF RS 232 INTERFACE ANALOG OUTPUT +/-10V AND RESIDUAL BUTTON SOFTWARE MODUL DRIVECOACH INC MEASURED-VALUE ACQUISITION AND GUIDED MEASUREMENT WITH PC ARE POSSIBLE TO BE USED WITH BASIC UNIT 2GA33 75-6A	Siemens