2SY52
| Артикул |
Наименование |
Производитель |
|
2SY5212-5SW41
|
WORM SHAFT, FOR MODULATING DUTY, COMPLETE WITH FEATHER KEY, BACKUP WASHERS, DEEP GROOVE BALL BEARINGS, ADJUSTING WASHERS, RETAINING RINGS AND SHAFT SEALING RINGS, FOR 2SA555/6/7/8, 2SB555/6,
|
Siemens
|
|
2SY5212-0SW41
|
WORM SHAFT, FOR STANDARD VERSION, COMPLETE WITH FEATHER KEY, BACKUP WASHERS, DEEP GROOVE BALL BEARINGS, ADJUSTING WASHERS, RETAINING RINGS AND SHAFT SEALING RINGS, FOR 2SA505 5-40 AND 10-80 RPM, 2SA506 5-40 RPM, 2SA507 2.5- 20 RPM, 2SA508 1.25-10 RPM,
|
Siemens
|
|
2SY5240-1AF00
|
OUTPUT FLANGE F10, PAINTED RAL7030, COMPLETE WITH O-RING, SHAFT SEALING RING AND MOUNTING PARTS FOR 2SA501/2, 2SA551/2, 2SB551/2, 2SC500/1/2/3/4 AND 2SC550/1/2,
|
Siemens
|
|
2SY5240-3AF10
|
OUTPUT FLANGE F14, PAINTED RAL7030, COMPLETE WITH O-RING, SHAFT SEALING RING AND MOUNTING PARTS FOR 2SA503/4, 2SA553/4, 2SB553/4,2SC505/6 AND 2SC553/4,
|
Siemens
|
|
2SY5240-5AF00
|
OUTPUT FLANGE F16, PAINTED RAL7030, COMPLETE WITH O-RING, SHAFT SEALING RING AND MOUNTING PARTS FOR MOUNTING ON INTERMEDIATE GEAR 2SA507/8 AND 2SA55/7/8,
|
Siemens
|
|
2SY5240-3AF00
|
OUTPUT FLANGE F14, PAINTED RAL7030, COMPLETE WITH O-RING, SHAFT SEALING RING AND MOUNTING PARTS FOR 2SA503/4, 2SA553/4, 2SB553/4,2SC505/6 AND 2SC553/4,
|
Siemens
|
|
2SY5240-2AF00
|
OUTPUT FLANGE G0, PAINTED RAL7030, COMPLETE WITH O-RING, SHAFT SEALING RING AND MOUNTING PARTS FOR 2SA501/2 AND 2SA551/2,
|
Siemens
|
|
2SY5240-4AF10
|
OUTPUT FLANGE F16, PAINTED RAL7030, COMPLETE WITH O-RING, SHAFT SEALING RING AND MOUNTING PARTS FOR 2SA505/6, 2SA555/6 AND 2SB555/6,
|
Siemens
|
|
2SY5240-2AF10
|
OUTPUT FLANGE G0, PAINTED RAL7030, COMPLETE WITH O-RING, SHAFT SEALING RING AND MOUNTING PARTS FOR 2SA501/2 AND 2SA551/2,
|
Siemens
|
|
2SY5213-0AB11
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, WITHOUT SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA501/2 5-40 AND 10-80 RPM, 2SC500/1/2/3/4,
|
Siemens
|
|
2SY5213-0AW31
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, WITHOUT SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA503/4 5-40 AND 10-80 RPM, 2SC505/6,
|
Siemens
|
|
2SY5213-0AB12
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, WITHOUT SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA501 20-112 RPM, 2SA502 20-160 RPM,
|
Siemens
|
|
2SY5213-0AW32
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, WITHOUT SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA503/4 20-160 RPM,
|
Siemens
|
|
2SY5213-0AB13
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, WITH SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA501/2 5-40 AND 10-80 RPM, 2SC500/1/2/3/4,
|
Siemens
|
|
2SY5213-0AW33
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, WITH SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA503/4 5-40 AND 10-80 RPM,
|
Siemens
|
|
2SY5213-0AB31
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, WITHOUT SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA503/4 5-40 AND 10-80 RPM, 2SC505/6,
|
Siemens
|
|
2SY5213-0AB32
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, WITHOUT SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA503/4 20-160 RPM,
|
Siemens
|
|
2SY5213-0AB14
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, WITH SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA501 20-112 RPM, 2SA502 20-160 RPM,
|
Siemens
|
|
2SY5213-0AW34
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, WITH SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA503/4 20-160 RPM,
|
Siemens
|
|
2SY5213-0AW41
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA505 5-40 AND 10-80 RPM, 2SA506 5-40 RPM, 2SA507 2.5-20 RPM, 2SA508 1.25-10 RPM,
|
Siemens
|
|
2SY5213-0AB33
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, WITH SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA503/4 5-40 AND 10-80 RPM,
|
Siemens
|
|
2SY5213-0AW42
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA505 20-112 RPM, 2SA506 10-80 RPM, 2SA507 5-28 RPM, 2SA508 2.5-20 RPM, 2SA508 2.5-14 1/MIN
|
Siemens
|
|
2SY5213-5AB11
|
OUTPUT SHAFT (B1), FOR MODUL. DUTY, WITHOUT SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA551/2, 2SB551/2, 2SC550/1/2,
|
Siemens
|
|
2SY5213-0AB34
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, WITH SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA503/4 20-160 RPM,
|
Siemens
|
|
2SY5213-5AB13
|
OUTPUT SHAFT (B1), FOR MODUL. DUTY, WITH SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA551/2,
|
Siemens
|
|
2SY5213-0AB41
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA505 5-40 AND 10-80 RPM, 2SA506 5-40 RPM, 2SA506 5-40 1/MIN, 2SA507 2.5- 20 1/MIN, 2SA508 1.25-10 1/MIN
|
Siemens
|
|
2SY5213-5AB31
|
OUTPUT SHAFT (B1), FOR MODUL. DUTY, WITHOUT SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA553/4, 2SB553/4, 2SC553/4,
|
Siemens
|
|
2SY5213-0AB42
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA505 20-112 RPM, 2SA506 10-80 RPM, 10-56 1/MIN, 2SA507 5-28 1/MIN, 2SA508 2.5-14 1/MIN
|
Siemens
|
|
2SY5213-5AB33
|
OUTPUT SHAFT (B1), FOR MODUL. DUTY, WITH SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA553/4,
|
Siemens
|
|
2SY5213-0AF13
|
OUTPUT SHAFT (B1), FOR STANDARD VERSION, WITH SPINDLE PROTECTION TUBE, COMPLETE WITH SQUARE SEAL, DEEP GROOVE BALL BEARING, RETAINING RINGS, BACKUP WASHER, ADJUSTING WASHERS AND SHAFT SEALING RING, FOR 2SA501/2 5-40 AND 10-80 RPM, 2SC500/1/2/3/4,
|
Siemens
|
Товары
151 - 180 из 270
Начало
|
Пред.
|
1
2
3
4
5
6
7
8
9
|
След. |
Конец
|
