PROFIBUS bus cables

Order No.	6XV1 830-0EH10	6XV1 831-2A	6XV1 830-0JH10	6XV1 830-0GH10
Product type designation	PROFIBUS FC Standard Cable GP	PROFIBUS FC Standard Cable IS GP	PROFIBUS FC Robust Cable	PROFIBUS FC Food Cable
Product description	Standard bus cable (2-core), sold by the meter, in bulk	Standard bus cable for fast assembly, sold by the meter, in bulk	Special bus cable (2-core), sold by the meter, in bulk	Bus cable (2-core), sold by the meter, in bulk
Suitability for application	Standard cable of special design for fast assembly with fixed installation	Use for intrinsically-safe distributed I/O systems, for fixed installation	Use in chemically and mechanically stressed environments	Use in the F & B industry
Cable designation	02YSY (ST) CY 1x2x0.64/2.55-150 VI KF 40 FR	02YSY (ST) CY 1x2x0.64/2.55 BL KF40 FR	02YSY (ST) C11Y 1x2x0.64/2.55-150 VI KF 40 FR	02YSY (ST) C2Y 1x2x0.64/2.55-150 KF 40
Cable length	-	-	-	-
Electrical specifications
Damping factor per length
Max. at 9.6 kHz	2.5 dB/km	2.5 dB/km	2.5 dB/km	2.5 dB/km
Max. at 38.4 kHz	4 dB/km	4 dB/km	4 dB/km	4 dB/km
Max. at 4 MHz	22 dB/km	22 dB/km	22 dB/km	22 dB/km
Max. at 16 MHz	42 dB/km	42 dB/km	42 dB/km	42 dB/km
Characteristic impedance
Rated value	150 Ω	150 Ω	150 Ω	150 Ω
At 9.6 kHz	270 Ω	270 Ω	270 Ω	270 Ω
At 38.4 kHz	185 Ω	185 Ω	185 Ω	185 Ω
At 3 MHz ... 20 MHz	150 Ω	150 Ω	150 Ω	150 Ω
Relative symmetrical tolerance
of characteristic impedance at 9.6 kHz	10 %	10 %	10 %	10 %
of characteristic impedance at 38.4 kHz	10 %	10 %	10 %	10 %
of characteristic impedance at 3 MHz ... 20 MHz	10 %	10 %	10 %	10 %
Max. loop resistance per length	110 Ω/km	110 Ω/km	110 Ω/km	110 Ω/km
Max. shield resistance per length	9.5 Ω/km	9.5 Ω/km	9.5 Ω/km	9.5 Ω/km
Capacitance per length at 1 kHz	28.5 pF/m	28.5 pF/m	28.5 pF/m	28.5 pF/m
Operating voltage, rms value	100 V	100 V	100 V	100 V
Mechanical data
Number of electrical cores	2	2	2	2
Design of shield	Overlapping aluminum-clad foil, surrounded by a braided screen of tin-plated copper wires	Overlapping aluminum-clad foil, sheathed in a braided screen of tin-plated copper wires	Overlapping aluminum-clad foil, sheathed in a braided screen of tin-plated copper wires	Overlapping aluminum-clad foil, sheathed in a braided screen of tin-plated copper wires
Design of electrical connection FastConnect	Yes	Yes	Yes	Yes
Outer diameter
of inner conductor	0.65 mm	0.64 mm	0.65 mm	0.65 mm
of core insulation	2.55 mm	2.55 mm	2.55 mm	2.55 mm
of inner sheath of cable	5.4 mm	5.4 mm	5.4 mm	5.4 mm
of cable sheath	8 mm	8 mm	8 mm	8 mm
Symmetrical tolerance of outer diameter of cable sheath	0.4 mm	0.4 mm	0.4 mm	0.4 mm
Outer diameter of cable sheath - Note	-	-	-	-
Material
of core insulation	PE	PE	PE	PE
of inner sheath of cable	PVC	PVC	PVC	PVC
of cable sheath	PVC	PVC	PUR	PE
Material of cable sheath - Note	-	-	-	Outer shield made of PE particularly suitable for the food sector
Color
of core insulation of data cores	Red / green	Red / green	Red / green	Red / green
of the cable sheath	Violet	Blue	Violet	Black
Bending radius
With single bending	150 mm	75 mm	150 mm	30 mm
With repeated bending	300 mm	150 mm	300 mm	60 mm
With continuous bending	-	-	-	-
Number of bending cycles	-	-	-	-
Number of bending cycles - Note	-	-	-	-
Number of torsion cycles with torsion by ± 180° on 1 m cable length	-	-	-	-
Maximum tensile load	100 N	100 N	100 N	100 N
Weight per length	0.08 kg/m	80 kg/km	71 kg/km	67 kg/km
Permitted ambient conditions
Ambient temperature
During operating phase	-40 … +75 °C	-40 … +75 °C	-40 … +60 °C	-40 … +60 °C
During storage	-40 … +75 °C	-40 … +75 °C	-40 … +60 °C	-40 … +60 °C
During transport	-40 … +75 °C	-40 … +75 °C	-40 … +60 °C	-40 … +60 °C
During mounting	-40 … +75 °C	-40 … +75 °C	-40 … +60 °C	-40 … +60 °C
Ambient conditions for operation	-	-	-	-
IP degree of protection	-	-	-	-
Behavior in fire	Flame-retardant in accordance with IEC 60332-3-24 (Category C) and UL 1685 (CSA FT 4)	Flame-retardant in accordance with IEC 60332-3-24 (Category C)	Flame-retardant in accordance with IEC 60332-1	Flammable
Chemical resistance
Mineral oil	Limited resistance	Limited resistance	Resistant	Limited resistance
Grease	Limited resistance	Limited resistance	Resistant	Limited resistance
Water	-	-	-	-
Radiological resistance to UV radiation	Resistant	Resistant	Resistant	Resistant
Product properties, functions, components General
Product property
Halogen-free	No	No	No	No
Silicon-free	Yes	Yes	Yes	Yes
Cable length
at 12 Mbit/s maximum
at 1.5 Mbit/s maximum
Standards, specifications, approvals
UL-Listing at 300 V rating	Yes: CMG / CL3 / Sun Res	Yes: CMG / CL3 / Sun Res	Yes: CMX	No
UL-Style at 600 V rating	Yes	Yes	No	No
Certificate of suitability	-	-	-	-
Certificate of Suitability RoHS conformity
Marine classification corporation
Germanischer Lloyd (GL)	-	-	-	-
Lloyds Register of Shipping (LRS)	-	-	-	-

Order No.	6XV1 830-3FH10	6XV1 831-2K	6XV1 830-3EH10	6XV1 830-0LH10
Product type designation	PROFIBUS FC Ground Cable	PROFIBUS FC Flexible Cable	PROFIBUS FC Trailing Cable	PROFIBUS FC FRNC Cable GP
Product description	Special bus cable (2-core) with additional outer shield, sold by the meter, in bulk	Flexible bus cable (4-core), sold by the meter, in bulk	Highly flexible bus cable (2-core), sold by the meter, in bulk	Highly flamed retardant, halogen-free bus cable (2-core), sold by the meter, in bulk
Suitability for application	For use as buried cable	For occasionally moved machine components	Continuous movement in a trailing cable	Halogen-free cable, suitable for indoor use
Cable designation	02YSY (ST) CY2Y 1x2x0.64/2.55-150 SW KF 40	02YH (ST) C11Y 1x2x0.65/2.56-150 LI KF40 FRNC FC VI	02YY (ST) C11Y 1x2x0.65/2.56-150 LI KF 40 FR petrol	02YSH (ST) CH 1x2x0.64/2.55-150 VI KF 25 FRNC FC
Cable length	-	-	-	-
Electrical specifications
Attenuation factor per length
Max. at 9.6 kHz	2.5 dB/km	3 dB/km	3 dB/km	2.5 dB/km
Max. at 38.4 kHz	4 dB/km	4 dB/km	4 dB/km	4 dB/km
Max. at 4 MHz	22 dB/km	25 dB/km	25 dB/km	22 dB/km
Max. at 16 MHz	42 dB/km	49 dB/km	49 dB/km	42 dB/km
Characteristic impedance
Rated value	150 Ω	150 Ω	150 Ω	150 Ω
at 9.6 kHz	270 Ω	270 Ω	270 Ω	270 Ω
at 38.4 kHz	185 Ω	185 Ω	185 Ω	185 Ω
at 3 MHz ... 20 MHz	150 Ω	150 Ω	150 Ω	150 Ω
Relative symmetrical tolerance
of characteristic impedance at 9.6 kHz	10 %	10 %	10 %	10 %
of characteristic impedance at 38.4 kHz	10 %	10 %	10 %	10 %
of characteristic impedance at 3 MHz to 20 MHz	10 %	10 %	10 %	10 %
Max. loop resistance per length	110 Ω/km	133 Ω/km	133 Ω/km	110 Ω/km
Max. shield resistance per length	9.5 Ω/km	14 Ω/km	14 Ω/km	9.5 Ω/km
Capacitance per length at 1 kHz	28.5 pF/m	28 pF/m	28 pF/m	28.5 pF/m
Operating voltage, rms value	100 V	100 V	100 V	100 V
Mechanical data
Number of electrical cores	2	2	2	2
Design of shield	Overlapping aluminum-clad foil, sheathed in a braided screen of tin-plated copper wires	Overlapping aluminum-clad foil, sheathed in a braided screen of tin-plated copper wires	Overlapping aluminum-clad foil, sheathed in a braided screen of tin-plated copper wires	Overlapping aluminum-clad foil, sheathed in a braided screen of tin-plated copper wires
Design of electrical connection FastConnect	Yes	Yes	Yes	Yes
Outer diameter
of inner conductor	0.65 mm	0.67 mm	0.67 mm	0.65 mm
of core insulation	2.55 mm	2.56 mm	2.56 mm	2.55 mm
of inner sheath of cable	5.4 mm	5.4 mm	5.4 mm	5.4 mm
of the cable sheath	10.8 mm	8 mm	8 mm	8 mm
Symmetrical tolerance of outer diameter of cable sheath	0.5 mm	0.4 mm	0.4 mm	0.4 mm
Outer diameter of cable sheath - Note	The cable (diameter 8.0 mm +-0.4 mm) has an additional black outer shield (diameter 10.8 mm +-0.5 mm) as protection against destruction when used as a buried cable. Because of the outer diameter > 8 mm: bus connectors can only be connected following removal of the outer shield.	-	-	-
Material
of core insulation	PE	PE	PE	PE
of inner sheath of cable	PVC	FRNC	PVC	FRNC
of cable sheath	PE / PVC	PUR	PUR	FRNC
Material of cable sheath - Note	PVC (cable shield), PE (additional outer shield)	-	-	-
Color
of core insulation of data cores	Red / green	Red / green	Red / green	Red / green
of the cable sheath	Black	Violet	Petrol	Violet
Bending radius
with single bending	41 mm	40 mm	40 mm	60 mm
With repeated bending	81 mm	120 mm	120 mm	80 mm
With continuous bending	-	-	-	-
Number of bending cycles	-	-	3 000 000	-
Number of bending cycles - Note	-	-	Suitable as trailing cable for 3 million bending cycles with a bending radius of 120 mm (15x D), and an acceleration of 4 m/s²	-
Number of torsion cycles with torsion by ± 180° on 1 m cable length	-	-	-	-
Maximum tensile load	100 N	100 N	100 N	100 N
Weight per length	117 kg/km	70 kg/km	77 kg/km	72 kg/km
Permitted ambient conditions
Ambient temperature
During operating phase	-40 … +60 °C	-20 … +60 °C	-40 … +60 °C	-25 … +80 °C
During storage	-40 … +60 °C	-40 … +60 °C	-40 … +60 °C	-25 … +80 °C
During transport	-40 … +60 °C	-40 … +60 °C	-40 … +60 °C	-25 … +80 °C
During mounting	-40 … +60 °C	-40 … +60 °C	-40 … +60 °C	-25 … +80 °C
Ambient conditions for operation	-	Restricted segment lengths (see Manual for PROFIBUS networks)	Restricted segment lengths (see Manual for PROFIBUS networks)	-
IP degree of protection	-	-	-	-
Behavior in fire	Flammable	Flame-retardant in accordance with IEC 60332-1-2	Flame-retardant in accordance with IEC 60332-1-2	Flame-retardant in accordance with IEC 60332-3-24 (Category C), IEC 60332-3-22 (Category A)
Chemical resistance
against mineral oil	Limited resistance	Resistant	Resistant	Limited resistance
against grease	Limited resistance	Resistant	Resistant	Limited resistance
against water	-	-	-	-
Radiological resistance to UV radiation	Resistant	Resistant	Resistant	Resistant
Product properties, functions, components General
Product property
Halogen-free	No	Yes	No	Yes
Silicon-free	Yes	Yes	Yes	Yes
Cable length
at 1.5 Mbit/s maximum
at 12 Mbit/s maximum
Standards, specifications, approvals
UL listing at 300 V rating	No	Yes: CMX	Yes: CMX	Yes: CM / CL3 / Sun Res
UL-Style at 600 V rating	No	No	No	Yes
Certificate of suitability	-	-	-	-
Certificate of suitability: RoHS conformity
Marine classification corporation
Germanischer Lloyd (GL)	-	-	-	-
Lloyds Register of Shipping (LRS)	-	-	-	-

Order No.	6XV1 830-3GH10	6XV1 830-0PH10	6XV1 830-0MH10
Product type designation	PROFIBUS Festoon Cable GP	PROFIBUS Torsion Cable	SIENOPYR FR Marine Cable
Product description	Flexible bus cable (2-core), sold by the meter, in bulk	Highly flexible bus cable (2-core), sold by the meter, in bulk	Bus cable (2-core), sold by the meter, in bulk
Suitability for application	Special for use on festoons	Use in moved machine components	Cable for installation on ships and offshore units
Cable designation	02YS (ST) CY 1x2x0.65/2.56 LI petrol FR	02Y (ST) C 11Y 1x2x0.8/2.56-150 LI FR VI	M-02Y (ST) CH X 1 x 2 x 0.35 100 V
Cable length	-	-	-
Electrical specifications
Attenuation factor per length
Max. at 9.6 kHz	3 dB/km	2.5 dB/km	3 dB/km
Max. at 38.4 kHz	4 dB/km	3 dB/km	5 dB/km
Max. at 4 MHz	25 dB/km	25 dB/km	22 dB/km
Max. at 16 MHz	49 dB/km	49 dB/km	45 dB/km
Characteristic impedance
Rated value	150 Ω	150 Ω	150 Ω
at 9.6 kHz	270 Ω	270 Ω	250 Ω
At 38.4 kHz	185 Ω	185 Ω	185 Ω
at 3 MHz ... 20 MHz	150 Ω	150 Ω	150 Ω
Relative symmetrical tolerance
of characteristic impedance at 9.6 kHz	10 %	10 %	10 %
of characteristic impedance at 38.4 kHz	10 %	10 %	10 %
of characteristic impedance at 3 MHz to 20 MHz	10 %	10 %	10 %
Max. loop resistance per length	133 Ω/km	98 Ω/km	110 Ω/km
Max. shield resistance per length	19 Ω/km	14 Ω/km	-
Capacitance per length at 1 kHz	28 pF/m	29 pF/m	-
Operating voltage, rms value	100 V	100 V	100 V
Mechanical data
Number of electrical cores	2	2	2
Design of shield	Overlapping aluminum-clad foil, sheathed in a braided screen of tin-plated copper wires	Overlapping aluminum-clad foil, sheathed in a braided screen of tin-plated copper wires	Overlapping aluminum-clad foil, sheathed in a braided screen of tin-plated copper wires
Design of electrical connection FastConnect	No	No	No
Outer diameter
of inner conductor	0.67 mm	0.8 mm	0.67 mm
of core insulation	2.56 mm	2.56 mm	-
of inner sheath of cable	5.8 mm	6 mm	8 mm
of cable sheath	8 mm	8 mm	10.3 mm
Symmetrical tolerance of outer diameter of cable sheath	0.3 mm	0.4 mm	0.5 mm
Outer diameter of cable sheath - Note	-	-	Outer diameter > 8 mm: bus connectors can only be connected following removal of the outer shield
Material
of core insulation	PE	PE	PE
of inner sheath of cable	-	-	Halogen-free polymer (HM4)
of cable sheath	PVC	PUR	Halogen-free cross-linked polymer
Material of cable sheath - Note	-	-	-
Color
of core insulation of data cores	Red / green	Red / green	Red / green
of the cable sheath	Petrol	Violet	Black
Bending radius
with single bending	30 mm	30 mm	103 mm
With repeated bending	70 mm	60 mm	206 mm
With continuous bending	-	-	-
Number of bending cycles	-	-	-
Number of bending cycles - Note	-	Not suitable for festoon mounting	-
Number of torsion cycles with torsion by ± 180° on 1 m cable length	-	5 000 000	-
Maximum tensile load	80 N	100 N	100 N
Weight per length	64 kg/km	65 kg/km	109 kg/km
Permitted ambient conditions
Ambient temperature
During operating phase	-40 … +80 °C	-25 … +75 °C	-40 … +80 °C
During storage	-40 … +80 °C	-40 … +80 °C	-40 … +80 °C
During transport	-40 … +80 °C	-40 … +80 °C	-40 … +80 °C
During mounting	-40 … +80 °C	-25 … +75 °C	-10 … +80 °C
Ambient conditions for operation	-	-	At ambient temperatures below -10 °C the cables must not be exposed to any more vibrations than those normally encountered in marine applications.
IP degree of protection	-	-	-
Behavior in fire	Flame-retardant in accordance with IEC 60332-3-24 (Category C)	Flame-retardant in accordance with IEC 60332-1-2	Flame-retardant in accordance with IEC 60332-3-24
Chemical resistance
against mineral oil	Limited resistance	Resistant	Resistant
against grease	Limited resistance	Resistant	Resistant
against water	-	-	Limited resistance
Radiological resistance to UV radiation	Resistant	Resistant	Resistant
Product properties, functions, components General
Product property
Halogen-free	No	Yes	Yes
Silicon-free	Yes	Yes	Yes
Cable length
at 1.5 Mbit/s maximum
at 12 Mbit/s maximum
Standards, specifications, approvals
UL listing at 300 V rating	Yes: CMG / PLCT / Sun Res / Oil Res	Yes: CMX	No
UL-Style at 600 V rating	Yes	No	No
Certificate of suitability	-	-	-
Certificate of suitability: RoHS conformity
Marine classification corporation
Germanischer Lloyd (GL)	-	-	Yes
Lloyds Register of Shipping (LRS)	-	-	Yes

Order No.	6XV1 860-2R	6XV1 860-2S
Product type designation	PROFIBUS Hybrid Standard Cable GP	PROFIBUS Hybrid Robust Cable
Product description	Hybrid cable (data and power cores), sold by the meter, in bulk	Hybrid cable (data and power cores), sold by the meter, in bulk
Suitability for application	Hybrid cable suitable as trailing cable, for data and power supply to ET 200pro	Rugged cable for data and power supply to ET 200pro in mechanically stressed environments. Cable resistant to spatter in accordance with HD22.2 S3 / 5
Cable designation	02Y(ST)C 1x2x0.65/2.56-150LI LIY-Z Y 2x1x1.5 VI	02Y(ST)C 1x2x0.65/2.56-150LI LIH-Z 11Y 2x1x1.5 VI FRNC
Cable length	-	-
Electrical specifications
Attenuation factor per length
Max. at 9.6 MHz
Max. at 38.4 kHz	0.004 dB/m	0.004 dB/m
Max. at 4 MHz	0.025 dB/m	0.025 dB/m
Max. at 16 MHz	0.049 dB/m	0.049 dB/m
Characteristic impedance
Rated value	150 Ω	150 Ω
at 9.6 kHz	270 Ω	270 Ω
at 38.4 kHz	185 Ω	185 Ω
at 3 MHz ... 20 MHz	150 Ω	150 Ω
Relative symmetrical tolerance
of characteristic impedance at 9.6 kHz	10 %	10 %
of characteristic impedance at 38.4 kHz	10 %	10 %
of characteristic impedance at 3 MHz to 20 MHz	10 %	10 %
Max. loop resistance per length	138 Ω/km	138 Ω/km
Max. shield resistance per length	10 Ω/km	10 Ω/km
Capacitance per length at 1 kHz	30 pF/m	30 pF/m
Inductance per length	-	-
Operating voltage, rms value	300 V	300 V
Conductor cross-section of power core	1.5 mm²	1.5 mm²
Continuous current of power cores	7.5 A	7.5 A
Mechanical data
Design of shield	Overlapping aluminum-clad foil, sheathed in a braided screen of tin-plated copper wires	Overlapping aluminum-clad foil, sheathed in a braided screen of tin-plated copper wires
Number of electrical cores	2	2
Design of electrical connection FastConnect	No	No
Outer diameter
of core insulation	2.56 mm	2.56 mm
of inner sheath of cable	-	-
of the cable sheath	11 mm	11 mm
Symmetrical tolerance of outer diameter of cable sheath	0.5 mm	0.5 mm
Outer diameter of cable sheath - Note	-	-
Material
of core insulation	PE	PE
of inner sheath of cable	-	-
of the cable sheath	PVC	PUR
Material of cable sheath - Note	-	-
Color
of core insulation of data cores	Red / green	Red / green
of core insulation of power cores	Black	Black
of the cable sheath	Violet	Violet
Bending radius
Minimum permitted single bending radius	44 mm	44 mm
Minimum permitted repeated bending radius	125 mm	125 mm
Number of bending cycles	-	-
Number of bending cycles - Note	-	-
Number of torsion cycles with torsion by ± 180° on 1 m cable length	-	-
Maximum tensile load	450 N	450 N
Weight per length	140 kg/km	135 kg/km
Permitted ambient conditions
Ambient temperature
During operating phase	-40 … +75 °C	-40 … +75 °C
During storage	-40 … +75 °C	-40 … +75 °C
During transport	-40 … +75 °C	-40 … +75 °C
During mounting	-40 … +75 °C	-40 … +75 °C
Ambient conditions for operation	-	-
IP degree of protection	-	-
Behavior in fire	Flame-retardant in accordance with IEC 60332-1-2	Flame-retardant in accordance with IEC 60332-1-2
Chemical resistance
against mineral oil	Limited resistance	Resistant
against grease	Limited resistance	Resistant
against water	-	-
Radiological resistance to UV radiation	Not resistant	Resistant
Product properties, functions, components General
Product property
Halogen-free	No	Yes
Silicon-free	Yes	Yes
Standards, specifications, approvals
UL listing at 300 V rating	Yes: CMG	Yes: CMX
UL-Style at 600 V rating	No	No
Certificate of suitability	-	-
Certificate of suitability: RoHS conformity	Yes	Yes