CP 5613 FO

Bestell-Nr.	6GK1 561-3FA00
Product type designation	CP 5613 FO
Transmission rate
Transmission rate at interface 1 in accordance with PROFIBUS	9.6 Kbit/s … 12 Mbit/s
Interfaces
Number of optical connections at interface 1 in accordance with PROFIBUS	2
Number of electrical connections for power supply	1
Design of optical connection at interface 1 in accordance with PROFIBUS	2x duplex sockets (FO)
Design of electrical connection
of backplane bus	PCI (32 bit 5 V)
for power supply	Low-voltage socket for hollow plug 3.5 mm (-) / 1.3 mm (+)
Supply voltage, current consumption, power loss
Type of power supply	DC
Type of power supply: optional external supply	Yes
Power supply
1 from backplane bus	5 V
2 from backplane bus	12 V
External	9 … 12 V
Relative symmetrical tolerance
At 5 V with DC	5 %
At 12 V with DC	5 %
Current consumed
Max. 1 from backplane bus with DC	1.4 A
Max. 2 from backplane bus with DC	0.3 A
Maximum from external power supply with 12 V DC	0.4 A
Effective power loss	7 W
Permitted ambient conditions
Ambient temperature
During operating phase	5 … 60 °C
During storage	-40 … +70 °C
During transport	-40 … +70 °C
Relative humidity at 25 °C without condensation during operating phase, maximum	80 %
IP degree of protection	IP00
Design, dimensions and weights
Module format	PCI
Width	18 mm
Height	107 mm
Depth	168 mm
Net weight	250 g
Product properties, functions, components General
Number of plug-in cards of same design which can be inserted per PC station	4
Number of modules - Note	-
Cable length
With polymer cladded fiber cable, maximum	-
With plastic optical fiber cable, maximum	50 m
Performance data
Performance data Open communication
Software required for open communication by means of SEND/RECEIVE	FDL driver included in scope of delivery of CP
Number of possible connections for open communication by means of SEND/RECEIVE, maximum	80
Performance data for PROFIBUS DP master
Software required for DP master function	No
Service as DP master
DPV0	Yes
DPV1	Yes
DPV2	Yes
Number of DP slaves operable on DP master	124
Data volume
of address area of inputs as DP master, total	30 256 bytes
of address area of outputs as DP master, total	30 256 bytes
of address area of inputs per DP slave	244 bytes
of address area of outputs per DP slave	244 bytes
of address area of diagnostics data per DP slave	244 bytes
Performance data for PROFIBUS DP slave
Software required for DP slave function	-
Service as DP slave
DPV0	No
DPV1	No
Data volume
of address area of inputs as DP slave, total	-
of address area of outputs as DP slave, total	-
Performance data FMS functions
Software required for FMS communication	Yes, HARDNET-FMS (FMS-5613)
Number of possible connections with FMS connection, maximum	40
Performance data S7 communication
Software required for S7 communication	Yes, HARDNET-S7 (S7-5613)
Number of possible connections for S7/PG communication, maximum	50
Performance data Multiprotocol operation
Number of active connections in multiprotocol mode	50
Number of configurable connections per PC station	207
Product functions Management, configuration, programming
Configuration software required	NCM PC included in scope of delivery
Standards, specifications, approvals
Standard
For EMC	89/336/EEC
For CSA and UL safety	CAN/CSA C22.2 & UL 60950-1, UL 1950
For emitted interference	EN 50081-1, EN 50081-2
For noise immunity	EN 50082-1, EN 50082-2
Certificate of suitability
CE mark	Yes
C-Tick	Yes