|
6ES7 432-1HF00-0AB0 |
Supply voltages |
|
Load voltage L+ |
|
|
24 V |
Current consumption |
|
from backplane bus 5 V DC, max. |
150 mA |
from supply voltage L+, max. |
400 mA |
Power losses |
|
Power loss, max. |
9 W |
Analog outputs |
|
Number of analog outputs |
8 |
Cable length, shielded, max. |
200 m |
Voltage output, short-circuit protection |
Yes |
Voltage output, short-circuit current, max. |
30 mA |
Current output, no-load voltage, max. |
19 V |
Output ranges, voltage |
|
|
Yes |
|
Yes |
|
Yes |
Output ranges, current |
|
|
Yes |
|
Yes |
|
Yes |
Load impedance (in rated range of output) |
|
|
1 kΩ |
|
1 µF |
|
500 Ω; 600 ohms if common-mode-voltage reduced to <1 V |
Analog value creation |
|
Integrations and conversion time/ resolution per channel |
|
|
13 bit |
|
420 µs; 420 µs in the ranges 1 to 5 V and 4 to 20 mA; 300 µs in all ranges |
Settling time |
|
|
0.1 ms |
|
3.5 ms |
|
0.5 ms |
Errors/accuracies |
|
Operational limit in overall temperature range |
|
|
+/- 0,5 %; +/-10 V, 0 to 10 V, 1 to 5 V |
|
+/- 1 %; +/-20 mA, 4 to 20 mV |
Basic error limit (operational limit at 25 °C) |
|
|
+/- 0,5 %; +/-10 V, 0 to 10 V, 1 to 5 V |
|
+/- 0,5 %; +/-20 mA, 0 to 20 mA |
Interrupts/diagnostics/status information |
|
Substitute values connectable |
No |
Isolation |
|
Isolation checked with |
2120 V DC between bus and L+/M; 2120 V D between bus and analog part; 500 V DC between bus and local ground; 707 V DC between analog part and L+/M; 2120 V DC between analog part and local ground; 2120 V DC between L+/M and local ground |
Galvanic isolation |
|
Galvanic isolation analog outputs |
|
|
Yes |
Dimensions |
|
Required slots |
1 |
Dimensions and weight |
|
Dimensions |
|
|
25 mm |
|
290 mm |
|
210 mm |
Weight |
|
|
650 g |