|
6ES7 332-5RD00-0AB0 |
Supply voltages |
|
Load voltage L+ |
|
|
24 V |
Current consumption |
|
from load voltage L+ (without load), max. |
180 mA |
from backplane bus 5 V DC, max. |
80 mA |
Power losses |
|
Power loss, typ. |
4 W |
Connection method |
|
required front connector |
20-pin |
Analog outputs |
|
Number of analog outputs |
4 |
Cable length, shielded, max. |
200 m |
Voltage output, short-circuit protection |
Yes |
Voltage output, short-circuit current, max. |
70 mA |
Current output, no-load voltage, max. |
14 V |
Output ranges, current |
|
|
Yes |
|
Yes |
Connection of actuators |
|
|
Yes |
Load impedance (in rated range of output) |
|
|
500 Ω |
Analog value creation |
|
Integrations and conversion time/ resolution per channel |
|
|
15 bit |
|
2.5 ms |
Ex(i) characteristics |
|
Max. values of output circuits (per channel) |
|
|
850 nF |
|
70 mA |
|
6.6 mH |
|
440 mW |
|
14 V |
Errors/accuracies |
|
Operational limit in overall temperature range |
|
|
+/- 0,55 % |
Basic error limit (operational limit at 25 °C) |
|
|
+/- 0,2 % |
Interrupts/diagnostics/status information |
|
Diagnoses |
|
|
Yes |
|
Yes |
|
Yes |
|
Yes |
Galvanic isolation |
|
Galvanic isolation analog outputs |
|
|
Yes |
Permissible potential difference |
|
between outputs and MANA (UCM) |
60 V DC/30 V AC when used in the hazardous area; 400 V DC/250 V AC when used in NON-hazardous area |
between the outputs (UCM) |
60 V DC/30 V AC when used in the hazardous area; 400 V DC/250 V AC when used in NON-hazardous area |
Standards, approvals, certificates |
|
Type of protection acc. to EN 50020 (CENELEC) |
[EEx ib] IIC |
Type of protection acc. to FM |
Class I, Division 2, Group A, B, C, D T4 |
Test number PTB |
Ex-96.D.2026X |
Dimensions and weight |
|
Weight |
|
|
280 g |